Made by DATEXIS (Data Science and Text-based Information Systems) at Beuth University of Applied Sciences Berlin
Deep Learning Technology: Sebastian Arnold, Betty van Aken, Paul Grundmann, Felix A. Gers and Alexander Löser. Learning Contextualized Document Representations for Healthcare Answer Retrieval. The Web Conference 2020 (WWW'20)
Funded by The Federal Ministry for Economic Affairs and Energy; Grant: 01MD19013D, Smart-MD Project, Digital Technologies
Overbite medically refers to the extent of vertical (superior-inferior) overlap of the maxillary central incisors over the mandibular central incisors, measured relative to the incisal ridges.
The term overbite does not refer to a specific condition, nor is it a form of malocclusion. Rather an absent or excess overbite would be a malocclusion. Normal overbite is not measured in exact terms, but as a proportion (approximately 30–50% of the height of the mandibular incisors) and is commonly expressed as a percentage.
Unilateral crossbite involves one side of the arch. The most common cause of unilateral crossbite is a narrow maxillary dental arch. This can happen due to habits such as digit sucking, prolonged use of pacifier or upper airway obstruction. Due to the discrepancy between the maxillary and mandibular arch, neuromuscular guidance of the mandible causes mandible to shift towards the side of the crossbite. This is also known as Functional mandibular shift. This shift can become structural if left untreated for a long time during growth, leading to skeletal asymmetries. Unilateral crossbites can present with following features in a child
- Lower midline deviation to the crossbite side
- Class 2 Subdivision relationships
- Temporomandibular disorders
Dental open bite occurs in patients where the anterior teeth fail to touch. However, this is not accompanied by the skeletal tendency of having an open bite. Thus this type of open bite may happen in patients who have horizontal or hypodivergent growth pattern. These patients have normal jaw growth and do not have the long face syndrome. The anterior open bite in these patients may be caused by Macroglossia, Tongue thrusting habit or digit sucking habits. Some of the characteristics of a dental open bite include:
- Normal lower anterior facial height
- Horizontal/Hypodivergent growth pattern
- Occlusal plane diverges after the premolar contact
- Under-eruption of the anterior incisors
- Over-eruption of the posterior incisors
- Proclined upper and lower incisors
- No vertical maxillary excess or gummy smile
- Presence of habits such as thumb sucking, tongue thrusting
- Spacing between anterior incisors due to their proclination
Patient with skeletal open bites that accompany dental open bites may have Adenoid faces or Long face syndrome. They are said to have what is known as "Hyperdivergent Growth Pattern" which includes characteristics such as:
- Increased Lower Anterior Facial Height
- Occlusal plane diverges after the 1st molar contact
- May accompany dental open bite
- Narrow nostrils with upturned nose
- Dolicofacial or Leptoprosopic face pattern
- Constricted maxillary arch
- Bilateral Posterior Crossbite
- High and narrow palatal vault
- Presence of crowding in teeth
- Mentalis muscle strain upon forcibly closing of lips
- Possible gummy smile with increased interlabial gap
Cephalometric analysis features of skeletal open bite may include:
- Increased Frankfurt-Mandibular Plane angle
- Steep Occlusal Plane Angle
- Increased SN-MP Angle
- Short Mandibular ramus
- Increased mandibular body length
- Downward and backward position of mandible
- Increased gonial angle
- Proclined upper incisors, retroclined or upright lower incisors
- Posterior part of maxilla is tipped downwards
- Posterior facial height equals 1/2 of anterior facial height
- Increased hard tissue Lower Anterior Facial Height
- Increased total anterior facial height
- Short mandibular ramus
Viken Sassouni developed Sassouni analysis which indicates that patient's with long face syndrome have 4 of their bony planes (mandibular plane, occlusal plane, palatal plane, SN plane) steep to each other.
Overbite is often confused with overjet, which is the distance between the maxillary anterior teeth and the mandibular anterior teeth in the anterior-posterior axis.
"Overbite" may also be used commonly to refer to Class II malocclusion or retrognathia, though this usage can be considered incorrect. This is where the mesiobuccal cusp of the maxillary first molar is situated anterior to the buccal groove of the mandibular first molar; in other words, the mandible (lower jaw) appears too far behind the maxilla. A person presenting with Class II malocclusion may exhibit excessive overbite as well, or may have the opposite problem, which is referred to as openbite (or apertognathia). In the case of apertognathia, the teeth do not overlap enough or at all. The upper teeth protrude past the lower teeth.
An anterior crossbite can be referred as negative overjet, and is typical of class III skeletal relations (prognathism).
Prognathism in humans can be due to normal variation among phenotypes. In human populations where prognathism is not the norm, it may be a malformation, the result of injury, a disease state or a hereditary condition. Prognathism is considered a disorder only if it affects mastication, speech or social function as a byproduct of severely affected aesthetics of the face.
Clinical determinants include soft tissue analysis where the clinician assesses nasolabial angle, the relationship of the soft tissue portion of the chin to the nose, and the relationship between the upper and lower lips; also used is dental arch relationship assessment such as Angle's classification.
Cephalometric analysis is the most accurate way of determining all types of prognathism, as it includes assessments of skeletal base, occlusal plane angulation, facial height, soft tissue assessment and anterior dental angulation. Various calculations and assessments of the information in a cephalometric radiograph allow the clinician to objectively determine dental and skeletal relationships and determine a treatment plan.
Prognathism is less prevalent in East Asians and Caucasians. It is not to be confused with micrognathism, although combinations of both may be found. It affects the middle third of the face, causing it to jut out, thereby increasing the facial area, similar in phenotype of archaic hominids and apes. Mandibular prognathism is a protrusion of the mandible, affecting the lower third of the face. Alveolar prognathism is a protrusion of that portion of the maxilla where the teeth are located, in the dental lining of the upper jaw. Prognathism can also be used to describe ways that the maxillary and mandibular dental arches relate to one another, including malocclusion (where the upper and lower teeth do not align). When there is maxillary and/or alveolar prognathism which causes an alignment of the maxillary incisors significantly anterior to the lower teeth, the condition is called an overjet. When the reverse is the case, and the lower jaw extends forward beyond the upper, the condition is referred to as retrognathia (reverse overjet).
Other kinds of malocclusions can be due to tooth size or horizontal, vertical, or transverse skeletal discrepancies, including skeletal asymmetries. Long faces may lead to "open bite malocclusion", while short faces can be coupled to a "Deep bite malocclusion". However, there are many other more common causes for open bites (such as tongue thrusting and thumb sucking), and likewise for deep bites. Upper or lower jaw can be overgrown or undergrown, leading to Class II or Class III malocclusions that may need corrective jaw surgery or orthognathic surgery as a part of overall treatment, which can be seen in about 5% of the general population.
Malocclusion is a common finding, although it is not usually serious enough to require treatment. Those who have more severe malocclusions, which present as a part of Craniofacial Anomalies, may require orthodontic and sometimes surgical treatment (orthognathic surgery) to correct the problem. Correction of malocclusion may reduce risk of tooth decay and help relieve excessive pressure on the temporomandibular joint. Orthodontic treatment is also used to align for aesthetic reasons.
Malocclusions may be coupled with skeletal disharmony of the face, where the relations between the upper and lower jaws are not appropriate. Such skeletal disharmonies often distort sufferer's face shape, severely affect aesthetics of the face, and may be coupled with mastication or speech problems. Most skeletal malocclusions can only be treated by orthognathic surgery.
In disease states, maxillary prognathism is associated with Cornelia de Lange syndrome; however, so-called false maxillary prognathism, or more accurately, retrognathism, where there is a lack of growth of the mandible, is by far a more common condition.
Prognathism, if not extremely severe, can be treated in growing patients with orthodontic functional or orthopaedic appliances. In adult patients this condition can be corrected by means of a combined surgical/orthodontic treatment, where most of the time a mandibular advancement is performed. The same can be said for mandibular prognathism.
Overjet is the extent of horizontal (anterior-posterior) overlap of the maxillary central incisors over the mandibular central incisors. In class II (division I) malocclusion the overjet is increased as the maxillary central incisors are protruded.
Binder's Syndrome/Binder Syndrome (Maxillo-Nasal Dysplasia) is a developmental disorder primarily affecting the anterior part of the maxilla and nasal complex (nose and jaw). It is a rare disorder and the causes are unclear.
The characteristics of the syndrome are typically visible. The syndrome involves hypoplasia of variable severity of cartilaginous nasal septum and premaxilla. It includes complete total absence of the anterior nasal spine. There are also associated anomalies of muscle insertions of the upper lip and the nasal floor and of the cervical spine. Affected individuals typically have an unusually flat, underdeveloped midface (midfacial hypoplasia), with an abnormally short nose and flat nasal bridge. They have an underdeveloped upper jaw, relatively protruding lower jaw with anterior mandibular vertical excess and a Class III skeletal and dental (reverse overjet) profile. They have a small frontal sinus and global facial imbalance.
Treatment is encouraged as early as possible with posteroanterior traction on the maxilla and, at about age 8, reinsertion of the nasolabial muscles onto the anterior border of the cartilaginous system. Many who have a severe case of the disorder undergo plastic surgery or orthodontic treatment for cosmetic reasons.