Made by DATEXIS (Data Science and Text-based Information Systems) at Beuth University of Applied Sciences Berlin
Deep Learning Technology: Sebastian Arnold, Betty van Aken, Paul Grundmann, Felix A. Gers and Alexander Löser. Learning Contextualized Document Representations for Healthcare Answer Retrieval. The Web Conference 2020 (WWW'20)
Funded by The Federal Ministry for Economic Affairs and Energy; Grant: 01MD19013D, Smart-MD Project, Digital Technologies
All the teeth are smaller than the normal size. True generalized microdontia is very rare, and occurs in pituitary dwarfism. Due to decreased levels of growth hormone the teeth fail to develop to a normal size.
All the teeth are normal size but appear smaller relative to enlarged jaws. Relative generalized microdontia may be the result of inheritance of a large jaw from one parent, and normal sized teeth from the other.
In dentistry, hypodontia is the condition at which the patient has missing teeth as a result of the failure of those teeth to develop (also called tooth agenesis). Hypodontia describes a situation where the patient is missing up to five permanent teeth, excluding the 3rd molars. Missing third molars occur in 9–30% of studied populations. In primary dentition the maxilla is more affected, with the condition usually involving the maxillary lateral incisor.
The condition of missing over five (six or more) permanent teeth, excluding 3rd molars or wisdom teeth, has been called oligodontia. The condition for missing all teeth, either primary and/or permanent), is called anodontia. A similar condition is hyperdontia, in which there are more than the usual number of teeth, more commonly called supernumerary teeth.
Many other terms to describe a reduction in number of teeth appear in the literature: aplasia of teeth, congenitally missing teeth, absence of teeth, agenesis of teeth and lack of teeth.
If Turner's hypoplasia is found on a canine or a premolar, the most likely cause is an infection that was present when the primary (baby) tooth was still in the mouth. Most likely, the primary tooth was heavily decayed and an area of inflamed tissues around the root of the tooth (called a periapical inflammation), affecting the development of the permanent tooth. The tooth most likely affected by this cause is the canine tooth. The appearance of the abnormality will depend on the severity and longevity of the infection.
If Turner's hypoplasia is found in the front (anterior) area of the mouth, the most likely cause is a traumatic injury to a primary tooth. The traumatized tooth, which is usually a maxillary central incisor, is pushed into the developing tooth underneath it and consequently affects the formation of enamel. Because of the location of the permanent tooth's developing tooth bud in relation to the primary tooth, the most likely affected area on the permanent tooth is the facial surface (the side closer to the lips or cheek). White or yellow discoloration may accompany Turner's hypoplasia. Enamel hypoplasia may also be present.
Turner's hypoplasia usually affects the tooth enamel if the trauma occurs prior to the third year of life. Injuries occurring after this time are less likely to cause enamel defects since the enamel is already calcified.
The same type of injury is also associated with the dilaceration of a tooth.
A single tooth is larger than the rest. This is unusual and could be the result of fusion and germination that cause enlarged crowns.
All teeth, although the same size, grow in larger than normal. This is seen in cases of growth hormone excess called pituitary gigantism. It is the rarest of the types.
Supernumerary teeth can be classified by shape and by position. The shapes include the following:
- Supplemental (where the tooth has a normal shape for the teeth in that series);
- Tuberculate (also called "barrel shaped");
- Conical (also called "peg shaped");
- Compound odontoma (multiple small tooth-like forms);
- Complex odontoma (a disorganized mass of dental tissue)
When classified by position, a supernumerary tooth may be referred to as a "mesiodens", a "paramolar", or a "distomolar".
The most common supernumerary tooth is a mesiodens, which is a malformed, peg-like tooth that occurs between the maxillary central incisors.
Fourth and fifth molars that form behind the third molars are another kind of supernumerary teeth.
The presence of a supernumerary tooth, particularly when seen in young children, is associated with a disturbance of the maxillary incisor region. This commonly results in the impaction of the incisors during the mixed dentition stage. The study debating this also considered many other factors such as: the patient’s age, number, morphology, growth orientation and position of the supernumerary tooth. Therefore, the presence of a supernumerary tooth when found must be appropriately approached with the correct treatment plan incorporating the likelihood of incisal crowding.
The phenomenon of gemination arises when two teeth develop from one tooth bud and, as a result, the patient has an extra tooth, in contrast to fusion, where the patient would appear to be missing one tooth.
Fused teeth arise through union of two normally separated tooth germs, and depending upon the stage of development of the teeth at the time of union, it may be either complete or incomplete. On some occasions, two independent pulp chambers and root canals can be seen. However, fusion can also be the union of a normal tooth bud to a supernumerary tooth germ. In these cases, the number of teeth is also normal and differentiation from gemination may be very difficult, if not impossible. In geminated teeth, division is usually incomplete and results in a large tooth crown that has a single root and a single canal. It is an asymptomatic condition.
The prevalence of germination or fusion is 2.5% in primary dentition, and 0.1 - 0.2% in permanent dentition. It is more frequently observed in primary than permanent dentition; anterior than posterior teeth; unilaterally than bilaterally. It commonly occurs in the primary upper incisors.
Talon Cusp will show physical signs of the irregular dental formation of the teeth and cause other symptoms of the disease that could possibly lead to dental problems in the future depending on severity of the deformity. Most commonly, the extra cusp is located on the lingual surface, giving a three-pronged appearance which has been described as an eagle talon. Rarely however the extra cusp may be situated on the facial surface, or there may be extra cusps on both lingual and facial surfaces. There may be a deep groove between the talon cusp and the rest of the tooth. The extra cusp typically contains pulp tissue. When viewing talon cusp from the occlusal, the projection will appear "x-shaped" as well as appears conical and mimicking the shape of an "eagle's talon".
Symptoms of talon cusp include:
- Interference with occlusion or bite
- Irritation of soft tissues and tongue
- Accidental cusp fracture
- Susceptible to dental caries
It can be caused by any of the following:
- Nutritional factors.
- Some diseases (such as undiagnosed and untreated celiac disease, chicken pox, congenital syphilis).
- Hypocalcemia.
- Fluoride ingestion (dental fluorosis).
- Birth injury.
- Preterm birth.
- Infection.
- Trauma from a deciduous tooth.
This type of failure of eruption takes place when the affected tooth is ankylosed to the bone around it. This is different than primary failure of eruption where the affected tooth/teeth were not ankylosed. In mechanical failure of eruption, affected tooth has partial or complete loss of PDL in a panoramic radiograph and teeth distal to affected tooth do not have this condition. On a percussion test, a tooth with mechanical failure of eruption will have a dull metallic sound.
In persons of European ancestry, the most common missing teeth are the wisdom teeth (25–35%), the permanent upper lateral incisors (2%), the lower second premolars (3%), or the upper second premolar, with a higher prevalence in females than in males. The prevalence of missing primary teeth is found at 0.1–0.9%, with a 1:1 male to female ratio. Excluding the third molars, missing permanent dentition accounts for 3.5–6.5%. Similar trends of missing teeth can be seen in approximately 3–10% of orthodontic patients.
30-50% of people with missing primary teeth will have missing permanent teeth, as well.
There have been many syndromes which have been identified to be related to failure of eruption of teeth. These syndromes are Cleidocranial dyspalsia, Osteoporosis, Rutherford syndrome, GAPO syndrome and Osteoglophonic dysplasia.
Most commonly the individual complains of food getting lodged beneath the gums and a soreness that is usually confused with throat infections. In slightly milder forms a swelling is visible and mouth opening becomes difficult in severe cases. Pain is invariably present.
Tooth gemination is a dental phenomenon that appears to be two teeth developed from one. There is one main crown with a cleft in it that, within the incisal third of the crown, looks like two teeth, though it is not two teeth. The number of the teeth in the arch will be normal.
Classifications enable the oral surgeon to determine the difficulty in removal of the impacted tooth. The primary factor determining the difficulty is accessibility, which is determined by adjacent teeth or other structures that impair access or delivery pathway. The majority of classification schemes are based on analysis on a radiograph. The most frequently considered factors are discussed below.
Talon Cusp is a rare dental anomaly. Generally a person with this develops "cusp-like" projections located on the inside surface of the affected tooth. Talon cusp is an extra cusp on an anterior tooth. Other names for talon cusp is eagle's talon, dens evaginatus, interstitial cusp, tuberculated premolar, evaginated odontoma and supernumerary cusp. Although talon cusp may not appear serious (and in some people may be completely benign), it can cause clinical, diagnostic, functional problems and alters the aesthetic appeal.
The term refers to the same condition as dens evaginatus, but the talon cusp is the manifestation of dens evaginatus on anterior teeth. Talon cusp can simply be defined as hyperplasia of the cingulum of an anterior tooth.Talon cusp was first described by W.H. Mitchell in 1982 and named by J. Kimball Mellor B.S., D.D.S. and Louis W. Ripa, D.D.S., M.S. due to its similar appearance to an eagle's talon. Some sources define a talon cusp as an extra cusp which extends at least half the distance between the cementoenamel junction and the incisal edge of the tooth. Other sources classify all enlarged cingula as talon cusps and classify them according to the degree of enlargement.
The incidence has been found to range from 1% to 6% of the population. Talon cusp tends to occur on permanent teeth only. They are vary rare in (deciduous) baby teeth. In most cases the involved teeth are the permanent maxillary lateral incisors (55%), followed by maxillary central incisors (33%), mandibular incisors (6%), and maxillary canines (4%).
Tooth pathology (or tooth diseases, tooth disorders or dental pathology), is any condition of the teeth that can be congenital or acquired. Sometimes a congenital tooth diseases are called "tooth abnormalities". These are among the most common diseases in humans The prevention, diagnosis, treatment and rehabilitation of these diseases are the base to the dentistry profession, in which are dentists and dental hygienists, and its sub-specialties, such as oral medicine, oral and maxillofacial surgery, and endodontics.
The phenomenon of tooth fusion arises through union of two normally separated tooth germs, and depending upon the stage of development of the teeth at the time of union, it may be either complete or incomplete. On some occasions, two independent pulp chambers and root canals can be seen. However, fusion can also be the union of a normal tooth bud to a supernumerary tooth germ. In these cases, the number of teeth is fewer if the anomalous tooth is counted as one tooth. In geminated teeth, division is usually incomplete and results in a large tooth crown that has a single root and a single canal. Both gemination and fusion are prevalent in primary dentition, with incisors being more affected.
Tooth gemination, in contrast to fusion, arises when two teeth develop from one tooth bud. When the anomalous tooth appears to be two separate teeth, it appears that the patient has an extra tooth, although they have a normal number of tooth roots.
Clinical signs of TRs are often minimal since the discomfort can be minor. However, some authors have described discomfort while chewing, anorexia, dehydration, weight loss, and tooth fracture. The lower third premolar is the most commonly affected tooth.
Impacted wisdom teeth without a communication to the mouth, that have no pathology associated with the tooth and have not caused tooth resorption on the blocking tooth rarely have symptoms. In fact, only 12% of impacted wisdom teeth are associated with pathology.
When wisdom teeth communicate with the mouth, the most common symptom is localized pain, swelling and bleeding of the tissue overlying the tooth. This tissue is called the operculum and the disorder called pericoronitis which means inflammation around the crown of the tooth. Low grade chronic periodontitis commonly occurs on either the wisdom tooth or the second molar, causing less obvious symptoms such as bad breath and bleeding from the gums. The teeth can also remain asymptomatic (pain free), even with disease. As the teeth near the mouth during normal development, people sometimes report mild pressure of other symptoms similar to teething.
The term asymptomatic means that the person has no symptoms. The term asymptomatic should not be equated with absence of disease. Most diseases have no symptoms early in the disease process. A pain free or asymptomatic tooth can still be infected for many years before pain symptoms develop.
All teeth are classified as either developing, erupted (into the mouth), embedded (failure to erupt despite lack of blockage from another tooth) or impacted. An impacted tooth is one that fails to erupt due to blockage from another tooth.
Wisdom teeth develop between the ages of 14 and 25, with 50% of root formation completed by age 16 and 95% of all teeth erupted by the age of 25. However, tooth movement can continue beyond the age of 25.
Impacted wisdom teeth are classified by the direction and depth of impaction, the amount of available space for tooth eruption. and the amount of soft tissue or bone (or both) that covers them. The classification structure helps clinicians estimate the risks for impaction, infections and complications associated with wisdom teeth removal. Wisdom teeth are also classified by the presence (or absence) of symptoms and disease.
One review found that 11% of teeth will have evidence of disease and are symptomatic, 0.6% will be symptomatic but have no disease, 51% will be asymptomatic but have disease present and 37% will be asymptomatic and have no disease.
Impacted wisdom teeth are often described by the direction of their impaction (forward tilting, or mesioangular being the most common), the depth of impaction and the age of the patient as well as other factors such as pre-existing infection or the presence of pathology. Of these predictors, age correlates best with extraction difficulty and complications during wisdom teeth removal rather than the orientation of the impaction.
Another classification system often taught in U.S. dental schools is known as "Pell and Gregory Classification". This system includes a horizontal and vertical component to classify the location of third molars (predominately applicable to mandibular third molars): the third molar's relationship to the occlusal plane being the vertical or "x-component" and to the anterior border of the ramus being the horizontal or "y-component". Vertically, Class A impaction is one in which the occlusal surface of the impacted tooth is level or nearly level with the occlusal plane and the cervical line of the adjacent second molar.
Feline Tooth Resorption (TR) is a syndrome in cats characterized by resorption of the tooth by odontoclasts, cells similar to osteoclasts. TR has also been called "feline odontoclastic resorption lesion" (FORL), neck lesion, cervical neck lesion, cervical line erosion, feline subgingival resorptive lesion, feline caries, or feline cavity. It is one of the most common diseases of domestic cats, affecting up to two-thirds. TRs have been seen more recently in the history of feline medicine due to the advancing ages of cats, but 800-year-old cat skeletons have shown evidence of this disease. Purebred cats, especially Siamese and Persians, may be more susceptible.
TRs clinically appear as erosions of the surface of the tooth at the gingival border. They are often covered with calculus or gingival tissue. It is a progressive disease, usually starting with loss of cementum and dentin and leading to penetration of the pulp cavity. Resorption continues up the dentinal tubules into the tooth crown. The enamel is also resorbed or undermined to the point of tooth fracture. Resorbed cementum and dentin is replaced with bone-like tissue.
The condition is thought to be due to trauma or possibly a delay in tooth eruption relative to bone remodeling gradients during the period in which tooth is forming. The result is that the position of the calcified portion of the tooth is changed and the remainder of the tooth is formed at an angle.
The curve or bend may occur anywhere along the length of the tooth, sometimes at the cervical portion, at other times midway along the root or even just at the apex of the root, depending upon the amount of root formed when the injury occurred.
Such an injury to a permanent tooth, resulting in dilaceration, often follows traumatic injury to the deciduous predecessor in which that tooth is driven apically into the jaw.