A person experiencing caries may not be aware of the disease. The earliest sign of a new carious lesion is the appearance of a chalky white spot on the surface of the tooth, indicating an area of demineralization of enamel. This is referred to as a white spot lesion, an incipient carious lesion or a "microcavity". As the lesion continues to demineralize, it can turn brown but will eventually turn into a cavitation ("cavity"). Before the cavity forms, the process is reversible, but once a cavity forms, the lost tooth structure cannot be regenerated.

A lesion that appears dark brown and shiny suggests dental caries were once present but the demineralization process has stopped, leaving a stain. Active decay is lighter in color and dull in appearance.

As the enamel and dentin are destroyed, the cavity becomes more noticeable. The affected areas of the tooth change color and become soft to the touch. Once the decay passes through enamel, the dentinal tubules, which have passages to the nerve of the tooth, become exposed, resulting in pain that can be transient, temporarily worsening with exposure to heat, cold, or sweet foods and drinks. A tooth weakened by extensive internal decay can sometimes suddenly fracture under normal chewing forces. When the decay has progressed enough to allow the bacteria to overwhelm the pulp tissue in the center of the tooth, a toothache can result and the pain will become more constant. Death of the pulp tissue and infection are common consequences. The tooth will no longer be sensitive to hot or cold, but can be very tender to pressure.

Dental caries can also cause bad breath and foul tastes. In highly progressed cases, an infection can spread from the tooth to the surrounding soft tissues. Complications such as cavernous sinus thrombosis and Ludwig angina can be life-threatening.

Impacted wisdom teeth without a communication to the mouth, that have no pathology associated with the tooth and have not caused tooth resorption on the blocking tooth rarely have symptoms. In fact, only 12% of impacted wisdom teeth are associated with pathology.

When wisdom teeth communicate with the mouth, the most common symptom is localized pain, swelling and bleeding of the tissue overlying the tooth. This tissue is called the operculum and the disorder called pericoronitis which means inflammation around the crown of the tooth. Low grade chronic periodontitis commonly occurs on either the wisdom tooth or the second molar, causing less obvious symptoms such as bad breath and bleeding from the gums. The teeth can also remain asymptomatic (pain free), even with disease. As the teeth near the mouth during normal development, people sometimes report mild pressure of other symptoms similar to teething.

The term asymptomatic means that the person has no symptoms. The term asymptomatic should not be equated with absence of disease. Most diseases have no symptoms early in the disease process. A pain free or asymptomatic tooth can still be infected for many years before pain symptoms develop.

Attrition occurs as a result of opposing tooth surfaces contacting. The contact can affect cuspal, incisal and proximal surface areas.

Indications of attrition can include:

- Loss of tooth anatomy: This results in loss of tooth characteristics including rounding or sharpening of incisal edges, loss of cusps and fracturing of teeth. Enamel of molar teeth may appear thin and flat. When in occlusion the teeth may appear the same height which is particularly apparent for anterior teeth.

- Sensitivity or pain: Attrition may be entirely asymptomatic, or there may be dentin hypersensitivity secondary to loss of the enamel layer, or tenderness of the periodontal ligament caused by occlusal trauma.

- Tooth discolouration: A yellow appearance of the tooth surface may be due to the enamel being worn away, exposing the darker yellower dentin layer underneath.

- Altered occlusion due to decreasing vertical height, or occlusal vertical dimension.

- Compromised periodontal support can result in tooth mobility and drifting of teeth

- Loss in posterior occlusal stability

- Mechanical failure of restorations

Early childhood caries (ECC), also known as "baby bottle caries," "baby bottle tooth decay" or "bottle rot," is a pattern of decay found in young children with their deciduous (baby) teeth. The teeth most likely affected are the maxillary anterior teeth, but all teeth can be affected. The name for this type of caries comes from the fact that the decay usually is a result of allowing children to fall asleep with sweetened liquids in their bottles or feeding children sweetened liquids multiple times during the day.

Another pattern of decay is "rampant caries", which signifies advanced or severe decay on multiple surfaces of many teeth. Rampant caries may be seen in individuals with xerostomia, poor oral hygiene, stimulant use (due to drug-induced dry mouth), and/or large sugar intake. If rampant caries is a result of previous radiation to the head and neck, it may be described as radiation-induced caries. Problems can also be caused by the self-destruction of roots and whole tooth resorption when new teeth erupt or later from unknown causes.

Children at 6–12 months are at increased risk of developing dental caries. For other kids aged 12–18 months, dental caries develop on primary teeth and approximately twice yearly for permanent teeth.

All teeth are classified as either developing, erupted (into the mouth), embedded (failure to erupt despite lack of blockage from another tooth) or impacted. An impacted tooth is one that fails to erupt due to blockage from another tooth.

Wisdom teeth develop between the ages of 14 and 25, with 50% of root formation completed by age 16 and 95% of all teeth erupted by the age of 25. However, tooth movement can continue beyond the age of 25.

Impacted wisdom teeth are classified by the direction and depth of impaction, the amount of available space for tooth eruption. and the amount of soft tissue or bone (or both) that covers them. The classification structure helps clinicians estimate the risks for impaction, infections and complications associated with wisdom teeth removal. Wisdom teeth are also classified by the presence (or absence) of symptoms and disease.

One review found that 11% of teeth will have evidence of disease and are symptomatic, 0.6% will be symptomatic but have no disease, 51% will be asymptomatic but have disease present and 37% will be asymptomatic and have no disease.

Impacted wisdom teeth are often described by the direction of their impaction (forward tilting, or mesioangular being the most common), the depth of impaction and the age of the patient as well as other factors such as pre-existing infection or the presence of pathology. Of these predictors, age correlates best with extraction difficulty and complications during wisdom teeth removal rather than the orientation of the impaction.

Another classification system often taught in U.S. dental schools is known as "Pell and Gregory Classification". This system includes a horizontal and vertical component to classify the location of third molars (predominately applicable to mandibular third molars): the third molar's relationship to the occlusal plane being the vertical or "x-component" and to the anterior border of the ramus being the horizontal or "y-component". Vertically, Class A impaction is one in which the occlusal surface of the impacted tooth is level or nearly level with the occlusal plane and the cervical line of the adjacent second molar.

Dental fluorosis (also termed mottled enamel) is an extremely common disorder, characterized by hypomineralization of tooth enamel caused by ingestion of excessive fluoride during enamel formation.

It appears as a range of visual changes in enamel causing degrees of intrinsic tooth discoloration, and, in some cases, physical damage to the teeth. The severity of the condition is dependent on the dose, duration, and age of the individual during the exposure. The "very mild" (and most common) form of fluorosis, is characterized by small, opaque, "paper" white areas scattered irregularly over the tooth, covering less than 25% of the tooth surface. In the "mild" form of the disease, these mottled patches can involve up to half of the surface area of the teeth. When fluorosis is moderate, all of the surfaces of the teeth are mottled and teeth may be ground down and brown stains frequently "disfigure" the teeth. Severe fluorosis is characterized by brown discoloration and discrete or confluent pitting; brown stains are widespread and teeth often present a corroded-looking appearance.

People with fluorosis are relatively resistant to dental caries (tooth decay caused by bacteria), although they may be of cosmetic concern. In moderate to severe fluorosis, teeth are physically damaged.

In the early stages, periodontitis has very few symptoms, and in many individuals the disease has progressed significantly before they seek treatment.

Symptoms may include:

- Redness or bleeding of gums while brushing teeth, using dental floss or biting into hard food (e.g., apples) (though this may occur even in gingivitis, where there is no attachment loss)

- Gum swelling that recurs

- Spitting out blood after brushing teeth

- Halitosis, or bad breath, and a persistent metallic taste in the mouth

- Gingival recession, resulting in apparent lengthening of teeth. (This may also be caused by heavy-handed brushing or with a stiff toothbrush.)

- Deep pockets between the teeth and the gums (pockets are sites where the attachment has been gradually destroyed by collagen-destroying enzymes, known as collagenases)

- Loose teeth, in the later stages (though this may occur for other reasons, as well)

Patients should realize gingival inflammation and bone destruction are largely painless. Hence, people may wrongly assume painless bleeding after teeth cleaning is insignificant, although this may be a symptom of progressing periodontitis in that patient.

The two main classification systems are described below. Others include the tooth surface fluorosis index (Horowitz et al. 1984), which combines Deans index and the TF index; and the fluorosis risk index (Pendrys 1990), which is intended to define the time at which fluoride exposure occurs, and relates fluorosis risk with tooth development stage.

The "severity" of disease refers to the amount of periodontal ligament fibers that have been lost, termed "clinical attachment loss". According to the American Academy of Periodontology, the classification of severity is as follows:

- Mild: of attachment loss

- Moderate: of attachment loss

- Severe: ≥ of attachment loss

Early Childhood Caries (ECC), formerly known as nursing bottle caries, baby bottle tooth decay, night bottle mouth and night bottle caries, is a disease that affects teeth in children aged between birth and 71 months. ECC is characterized by the presence of 1 or more decayed (noncavitated or cavitated lesions), missing (due to caries), or filled tooth surfaces in any primary tooth. ECC has been shown to be a very common, transmissible bacterial infection, usually passed from the primary caregiver to the child. The main bacteria responsible for dental caries is Streptococcus mutans (S. Mutans) and Lactobacillus. There is also evidence that supports that those who are in lower socioeconomic populations are at greater risk of developing ECC.

Clinical signs of TRs are often minimal since the discomfort can be minor. However, some authors have described discomfort while chewing, anorexia, dehydration, weight loss, and tooth fracture. The lower third premolar is the most commonly affected tooth.

Early childhood caries (ECC) is a multi-factorial disease, referring to various risk factors that inter-relate to increase risk of developing the disease. These risk factors include but not limited to, cariogenic bacteria, diet practices and socioeconomic factors. Normally after 6 months, deciduous teeth begin to erupt means, they are susceptible to tooth decay or dental caries. In some unfortunate cases, infants and young children have experienced severe tooth decay called ECC. This can result in the child experiencing severe pain, extensive dental restorations or extractions. The good news is that ECC is preventable, however, still remains a large burden particularly towards health care expenditure.

The lesions that appear in teeth affected with MIH can present as opacities that vary from white to yellow-brown. They are usually asymmetrical in appearance, with a sharp demarcation that distinguishes between normal and affected enamel. The lesions usually do not involve the cervical third of affected teeth.

Opacities due to MIH can be quite visible especially on anterior teeth which could present as a problem aesthetically. Patients frequently claim aesthetic discomfort when anterior teeth are involved. The discoloured appearance of the anterior teeth could also have negative effects on a child’s psychological development and self-esteem.

Abrasion is a pathological, non-carious tooth loss that most commonly affects the premolars and canines. Abrasion frequently presents at the cemento-enamel junction and can be caused by many contributing factors, all with the ability to affect the tooth surface in varying degrees.

Sources of abrasion may arise from oral hygiene habits such as toothbrushes, toothpicks, floss, and dental appliance or may arise from other habits such as nail biting, chewing tobacco or another object. Abrasion can also occur from the type of dentifrice being utilized as some have more abrasive qualities such as whitening toothpastes.

The appearance may vary depending on the aetiology of abrasion, however most commonly presents in a V-shaped caused by excessive lateral pressure whilst tooth-brushing. The surface is shiny rather than carious, and sometimes the ridge is deep enough to see the pulp chamber within the tooth itself.

In order for successful treatment of abrasion to occur, the aetiology first needs to be identified and ceased, e.g. overzealous brushing. Once this has occurred subsequent treatment may involve the changes in oral hygiene or toothpaste, application of fluoride to reduce sensitivity or the placement of a restoration to aid in reducing the progression of further tooth loss.

Dental attrition is a type of tooth wear caused by tooth-to-tooth contact, resulting in loss of tooth tissue, usually starting at the incisal or occlusal surfaces. Tooth wear is a physiological process and is commonly seen as a normal part of aging. Advanced and excessive wear and tooth surface loss can be defined as pathological in nature, requiring intervention by a dental practitioner. The pathological wear of the tooth surface can be caused by bruxism, which is clenching and grinding of the teeth. If the attrition is severe, the enamel can be completely worn away leaving underlying dentin exposed, resulting in an increased risk of dental caries and dentin hypersensitivity. It is best to identify pathological attrition at an early stage to prevent unnecessary loss of tooth structure as enamel does not regenerate.

In dentistry, calculus or tartar is a form of hardened dental plaque. It is caused by precipitation of minerals from saliva and gingival crevicular fluid (GCF) in plaque on the teeth. This process of precipitation kills the bacterial cells within dental plaque, but the rough and hardened surface that is formed provides an ideal surface for further plaque formation. This leads to calculus buildup, which compromises the health of the gingiva (gums). Calculus can form both along the gumline, where it is referred to as supragingival ("above the gum"), and within the narrow sulcus that exists between the teeth and the gingiva, where it is referred to as subgingival ("below the gum").

Calculus formation is associated with a number of clinical manifestations, including bad breath, receding gums and chronically inflamed gingiva. Brushing and flossing can remove plaque from which calculus forms; however, once formed, it is too hard and firmly attached to be removed with a toothbrush. Calculus buildup can be removed with ultrasonic tools or dental hand instruments (such as a periodontal scaler).

Dental plaque is a biofilm or mass of bacteria that grows on surfaces within the mouth. It is a sticky colorless deposit at first, but when it forms tartar, it is often brown or pale yellow. It is commonly found between the teeth, on the front of teeth, behind teeth, on chewing surfaces, along the gumline, or below the gumline cervical margins. Dental plaque is also known as microbial plaque, oral biofilm, dental biofilm, dental plaque biofilm or bacterial plaque biofilm.

Progression and build-up of dental plaque can give rise to tooth decay – the localised destruction of the tissues of the tooth by acid produced from the bacterial degradation of fermentable sugar – and periodontal problems such as gingivitis and periodontitis; hence it is important to disrupt the mass of bacteria and remove it. Plaque control and removal can be achieved with correct daily or twice-daily tooth brushing and use of interdental aids such as dental floss and interdental brushes.

Oral hygiene is important as dental biofilms may become acidic causing demineralization of the teeth (also known as dental caries) or harden into dental calculus (also known as tartar). Calculus cannot be removed through tooth brushing or with interdental aids, but only through professional cleaning.

For people, the relevance and functionality of teeth can be easily taken for granted, but a closer examination of their considerable significance will demonstrate how they are actually very important. Among other things, teeth serve to:

- support the lips and cheeks, providing for a fuller, more aesthetically pleasing appearance

- maintain an individual's vertical dimension of occlusion

- along with the tongue and lips, allow for the proper pronunciation of various sounds

- preserve and maintain the height of the alveolar ridge

- cut, grind, and otherwise chew food

Gum recession is generally not an acute condition. In most cases, receding of gums is a progressive condition that occurs gradually over the years. This is one reason that it is common over the age of 40. Because the changes in the condition of the gums from one day to another are minimal, patients get used to the gums' appearance and tend not to notice the recession visually. Receding gums may remain unnoticed until the condition starts to cause symptoms.

The following signs and symptoms may indicate gum recession:

- Tooth mobility

- Dentin hypersensitivity (over-sensitive teeth) - short, sharp pain is triggered by hot, cold, sweet, sour, or spicy food and drink. If the cementum covering the root is not protected anymore by the gums, it is easily abraded exposing the dentin tubules to external stimuli.

- Teeth may also appear longer than normal (a larger part of the crown is visible if gums are receding)

- The roots of the tooth are exposed and visible

- The tooth feels notched at the gum line

- Change in the tooth’s color (due to the color difference between enamel and cementum)

- Spaces between teeth seem to grow (the space is the same, but it seems larger because the gums do not fill it any more)

- Cavities below the gum line

If the gum recession is caused by gingivitis, the following symptoms may also be present:

- Puffy, red, or swollen (inflamed) gums

- Gum bleeding while brushing or flossing

- Bad breath (halitosis)

In some cases, it is the treatment of gingivitis that reveals a gum recession problem, that was previously masked by the gums swelling.

Tooth wear (also termed non-carious tooth substance loss) refers to loss of tooth substance by means other than dental caries or dental trauma. Tooth wear is a very common condition that occurs in approximately 97% of the population. This is a normal physiological process occurring throughout life, but accelerated tooth wear can become a problem.

Tooth wear is majorly the result of three processes; attrition, abrasion and erosion. These forms of tooth wear can further lead to a condition known as abfraction, where by tooth tissue is 'fractured' due to stress lesions caused by extrinsic forces on the enamel. Tooth wear is a complex, multi-factorial problem and there is difficulty identifying a single causative factor. However, tooth wear is often a combination of the above processes. Many clinicians therefore make diagnoses such as "tooth wear with a major element of attrition", or "tooth wear with a major element of erosion" to reflect this. This makes the diagnosis and management difficult. Therefore, it is important to distinguish between these various types of tooth wear, provide an insight into diagnosis, risk factors, and causative factors, in order to implement appropriate interventions.

Multiple indices have been developed in order to assess and record the degree of tooth wear, the earliest was that by Paul Broca. In 1984, Smith and Knight developed the tooth wear index (TWI) where four visible surfaces (buccal, cervical, lingual, occlusal-incisal) of all teeth present are scored for wear, regardless of the cause.

This type of classification is based on the amount of impacted tooth that is covered with the mandibular ramus. It is known as the Pell and Gregory classification, classes 1, 2, and 3.

Most commonly used classification system with respect to treatment planning. Depending on the angulation the tooth might be classified as:

- Mesioangular

- Horizontal

- Vertical

- Distoangular

- Palatal

- Buccal

- Lingual

Tooth discoloration (also termed tooth staining) is abnormal tooth color, hue or translucency. External discoloration is accumulation of stains on the tooth surface. Internal discoloration is due to absorption of pigment particles into tooth structure. Sometimes there are several different co-existent factors responsible for discoloration.

The appearance and perception of a tooth is the result of a complex interaction of factors such as lighting conditions, translucency, opacity, light scattering, gloss and the human eye and brain. Of these, the intrinsic pigmentation of a tooth is the most influential, which in turn is determined by genetic and natural factors. Light hitting a tooth undergoes reflection, absorption and transmission by varying degrees in each tissue layer of the tooth substance. Reflected light detected by the human eye determines the perceived appearance of a tooth.

Teeth have a thin enamel layer on the outer surface. The enamel layer is whiter and semitransparent, and contributes blue, pink green tints to the tooth color. The underlying dentin layer is darker than enamel, yellow-brown in color, and less transparent. Dentin forms the bulk of the tooth substance, and contributes most to the overall tooth color. At the core of the tooth is soft connective tissue termed the dental pulp. The pulp is pink/red due to its vascularity, but is rarely visible through the overlying enamel and dentin unless the thickness of these layers is reduced by tooth wear (or rarely internal resorption).

Public opinion of what is normal tooth shade tends to be distorted. Portrayals of cosmetically enhanced teeth are common in the media. In one report, the most common tooth shade in the general population ranged from A1 to A3 on the VITA classical A1-D4 shade guide.

Tooth color varies according to race, gender and geographic region. Females generally have slightly whiter teeth than males, partly because females' teeth are smaller, and therefore there is less bulk of dentin, partially visible through the enamel layer. For the same reason, larger teeth such as the molars and the canine (cuspid) teeth tend to be darker. Baby teeth (deciduous teeth) are generally whiter than the adult teeth that follow, again due to differences in the ratio of enamel to dentin.