Impacted wisdom teeth without a communication to the mouth, that have no pathology associated with the tooth and have not caused tooth resorption on the blocking tooth rarely have symptoms. In fact, only 12% of impacted wisdom teeth are associated with pathology.

When wisdom teeth communicate with the mouth, the most common symptom is localized pain, swelling and bleeding of the tissue overlying the tooth. This tissue is called the operculum and the disorder called pericoronitis which means inflammation around the crown of the tooth. Low grade chronic periodontitis commonly occurs on either the wisdom tooth or the second molar, causing less obvious symptoms such as bad breath and bleeding from the gums. The teeth can also remain asymptomatic (pain free), even with disease. As the teeth near the mouth during normal development, people sometimes report mild pressure of other symptoms similar to teething.

The term asymptomatic means that the person has no symptoms. The term asymptomatic should not be equated with absence of disease. Most diseases have no symptoms early in the disease process. A pain free or asymptomatic tooth can still be infected for many years before pain symptoms develop.

Attrition occurs as a result of opposing tooth surfaces contacting. The contact can affect cuspal, incisal and proximal surface areas.

Indications of attrition can include:

- Loss of tooth anatomy: This results in loss of tooth characteristics including rounding or sharpening of incisal edges, loss of cusps and fracturing of teeth. Enamel of molar teeth may appear thin and flat. When in occlusion the teeth may appear the same height which is particularly apparent for anterior teeth.

- Sensitivity or pain: Attrition may be entirely asymptomatic, or there may be dentin hypersensitivity secondary to loss of the enamel layer, or tenderness of the periodontal ligament caused by occlusal trauma.

- Tooth discolouration: A yellow appearance of the tooth surface may be due to the enamel being worn away, exposing the darker yellower dentin layer underneath.

- Altered occlusion due to decreasing vertical height, or occlusal vertical dimension.

- Compromised periodontal support can result in tooth mobility and drifting of teeth

- Loss in posterior occlusal stability

- Mechanical failure of restorations

All teeth are classified as either developing, erupted (into the mouth), embedded (failure to erupt despite lack of blockage from another tooth) or impacted. An impacted tooth is one that fails to erupt due to blockage from another tooth.

Wisdom teeth develop between the ages of 14 and 25, with 50% of root formation completed by age 16 and 95% of all teeth erupted by the age of 25. However, tooth movement can continue beyond the age of 25.

Impacted wisdom teeth are classified by the direction and depth of impaction, the amount of available space for tooth eruption. and the amount of soft tissue or bone (or both) that covers them. The classification structure helps clinicians estimate the risks for impaction, infections and complications associated with wisdom teeth removal. Wisdom teeth are also classified by the presence (or absence) of symptoms and disease.

One review found that 11% of teeth will have evidence of disease and are symptomatic, 0.6% will be symptomatic but have no disease, 51% will be asymptomatic but have disease present and 37% will be asymptomatic and have no disease.

Impacted wisdom teeth are often described by the direction of their impaction (forward tilting, or mesioangular being the most common), the depth of impaction and the age of the patient as well as other factors such as pre-existing infection or the presence of pathology. Of these predictors, age correlates best with extraction difficulty and complications during wisdom teeth removal rather than the orientation of the impaction.

Another classification system often taught in U.S. dental schools is known as "Pell and Gregory Classification". This system includes a horizontal and vertical component to classify the location of third molars (predominately applicable to mandibular third molars): the third molar's relationship to the occlusal plane being the vertical or "x-component" and to the anterior border of the ramus being the horizontal or "y-component". Vertically, Class A impaction is one in which the occlusal surface of the impacted tooth is level or nearly level with the occlusal plane and the cervical line of the adjacent second molar.

This type of classification is based on the amount of impacted tooth that is covered with the mandibular ramus. It is known as the Pell and Gregory classification, classes 1, 2, and 3.

Most commonly used classification system with respect to treatment planning. Depending on the angulation the tooth might be classified as:

- Mesioangular

- Horizontal

- Vertical

- Distoangular

- Palatal

- Buccal

- Lingual

A person experiencing caries may not be aware of the disease. The earliest sign of a new carious lesion is the appearance of a chalky white spot on the surface of the tooth, indicating an area of demineralization of enamel. This is referred to as a white spot lesion, an incipient carious lesion or a "microcavity". As the lesion continues to demineralize, it can turn brown but will eventually turn into a cavitation ("cavity"). Before the cavity forms, the process is reversible, but once a cavity forms, the lost tooth structure cannot be regenerated.

A lesion that appears dark brown and shiny suggests dental caries were once present but the demineralization process has stopped, leaving a stain. Active decay is lighter in color and dull in appearance.

As the enamel and dentin are destroyed, the cavity becomes more noticeable. The affected areas of the tooth change color and become soft to the touch. Once the decay passes through enamel, the dentinal tubules, which have passages to the nerve of the tooth, become exposed, resulting in pain that can be transient, temporarily worsening with exposure to heat, cold, or sweet foods and drinks. A tooth weakened by extensive internal decay can sometimes suddenly fracture under normal chewing forces. When the decay has progressed enough to allow the bacteria to overwhelm the pulp tissue in the center of the tooth, a toothache can result and the pain will become more constant. Death of the pulp tissue and infection are common consequences. The tooth will no longer be sensitive to hot or cold, but can be very tender to pressure.

Dental caries can also cause bad breath and foul tastes. In highly progressed cases, an infection can spread from the tooth to the surrounding soft tissues. Complications such as cavernous sinus thrombosis and Ludwig angina can be life-threatening.

Loss of attachment:

- By far the most common cause is periodontal disease (gum disease). This is painless, slowly progressing loss of bony support around teeth. It is made worse by smoking and the treatment is by improving the oral hygiene above and below the gumline.

- Dental abscesses can cause resorption of bone and consequent loss of attachment. Depending on the type of abscess, this loss of attachment may be restored once the abscess is treated, or it may be permanent.

- Many other conditions can cause permanent or temporary loss of attachment and increased tooth mobility. Examples include: Langerhans cell histiocytosis.

Increased forces on the tooth:

- Bruxism (abnormal clenching and grinding of teeth) can aggravate attachment loss and tooth mobility if periodontal disease is already present. The tooth mobility is typically reversible and the tooth returns to normal level of mobility once the bruxism is controlled.

- Dental trauma. Luxations, and root fractures of teeth can cause sudden mobility after a blow. Dental trauma may be isolated or associated with other facial trauma.

- Increased biting force on one tooth can cause temporary increased mobility until corrected. A common scenario is a new filling or crown which is a fraction of a millimeter too prominent in the bite, which after a few days causes periodontal pain in that tooth and/or the opposing tooth.

Opacities due to MIH can be quite visible especially on anterior teeth which could present as a problem aesthetically. Patients frequently claim aesthetic discomfort when anterior teeth are involved. The discoloured appearance of the anterior teeth could also have negative effects on a child’s psychological development and self-esteem.

Dental attrition is a type of tooth wear caused by tooth-to-tooth contact, resulting in loss of tooth tissue, usually starting at the incisal or occlusal surfaces. Tooth wear is a physiological process and is commonly seen as a normal part of aging. Advanced and excessive wear and tooth surface loss can be defined as pathological in nature, requiring intervention by a dental practitioner. The pathological wear of the tooth surface can be caused by bruxism, which is clenching and grinding of the teeth. If the attrition is severe, the enamel can be completely worn away leaving underlying dentin exposed, resulting in an increased risk of dental caries and dentin hypersensitivity. It is best to identify pathological attrition at an early stage to prevent unnecessary loss of tooth structure as enamel does not regenerate.

The lesions that appear in teeth affected with MIH can present as opacities that vary from white to yellow-brown. They are usually asymmetrical in appearance, with a sharp demarcation that distinguishes between normal and affected enamel. The lesions usually do not involve the cervical third of affected teeth.

Dental trauma refers to trauma (injury) to the teeth and/or periodontium (gums, periodontal ligament, alveolar bone), and nearby soft tissues such as the lips, tongue, etc. The study of dental trauma is called dental traumatology.

In the early stages, periodontitis has very few symptoms, and in many individuals the disease has progressed significantly before they seek treatment.

Symptoms may include:

- Redness or bleeding of gums while brushing teeth, using dental floss or biting into hard food (e.g., apples) (though this may occur even in gingivitis, where there is no attachment loss)

- Gum swelling that recurs

- Spitting out blood after brushing teeth

- Halitosis, or bad breath, and a persistent metallic taste in the mouth

- Gingival recession, resulting in apparent lengthening of teeth. (This may also be caused by heavy-handed brushing or with a stiff toothbrush.)

- Deep pockets between the teeth and the gums (pockets are sites where the attachment has been gradually destroyed by collagen-destroying enzymes, known as collagenases)

- Loose teeth, in the later stages (though this may occur for other reasons, as well)

Patients should realize gingival inflammation and bone destruction are largely painless. Hence, people may wrongly assume painless bleeding after teeth cleaning is insignificant, although this may be a symptom of progressing periodontitis in that patient.

Acid erosion often coexists with abrasion and attrition. Abrasion is most often caused by brushing teeth too hard.

Any frothing or swishing acidic drinks around the mouth increases the risk of acid erosion.

For people, the relevance and functionality of teeth can be easily taken for granted, but a closer examination of their considerable significance will demonstrate how they are actually very important. Among other things, teeth serve to:

- support the lips and cheeks, providing for a fuller, more aesthetically pleasing appearance

- maintain an individual's vertical dimension of occlusion

- along with the tongue and lips, allow for the proper pronunciation of various sounds

- preserve and maintain the height of the alveolar ridge

- cut, grind, and otherwise chew food

The "severity" of disease refers to the amount of periodontal ligament fibers that have been lost, termed "clinical attachment loss". According to the American Academy of Periodontology, the classification of severity is as follows:

- Mild: of attachment loss

- Moderate: of attachment loss

- Severe: ≥ of attachment loss

Clinically, there is a number of physiological results that serve as evidence of occlusal trauma:,

- Tooth mobility

- Fremitus

- Tooth migration

- Pain

- Thermal sensitivity

- Pain on chewing or percussion

- Wear facets

Microscopically, there will be a number of features that accompany occlusal trauma:

- Hemorrhage

- Necrosis

- Widening of the periodontal ligament, or PDL (also serves as a very common radiographic feature)

- Bone resorption

- Cementum loss and tears

It was concluded that widening of the periodontal ligament was a "functional adaptation to changes in functional requirements".

The two main classification systems are described below. Others include the tooth surface fluorosis index (Horowitz et al. 1984), which combines Deans index and the TF index; and the fluorosis risk index (Pendrys 1990), which is intended to define the time at which fluoride exposure occurs, and relates fluorosis risk with tooth development stage.

When an individual's mouth is at rest, the teeth in the opposing jaws are nearly touching; there is what is referred to as a "freeway space" of roughly 2–3 mm. However, this distance is partially maintained as a result of the teeth limiting any further closure past the point of maximum intercuspation. When there are no teeth present in the mouth, the natural vertical dimension of occlusion is lost and the mouth has a tendency to overclose. This causes the cheeks to exhibit a "sunken-in" appearance and wrinkle lines to form at the commissures. Additionally, the anterior teeth, when present, serve to properly support the lips and provide for certain aesthetic features, such as an acute nasiolabial angle.

Loss of muscle tone and skin elasticity due to old age, when most individuals begin to experience edentulism, tend to further exacerbate this condition.

The tongue, which consists of a very dynamic group of muscles, tends to fill the space it is allowed, and in the absence of teeth, will broaden out. This makes it initially difficult to fabricate both complete dentures and removable partial dentures for patients exhibiting complete and partial edentulism, respectively; however, once the space is "taken back" by the prosthetic teeth, the tongue will return to a narrower body.

Early childhood caries (ECC), also known as "baby bottle caries," "baby bottle tooth decay" or "bottle rot," is a pattern of decay found in young children with their deciduous (baby) teeth. The teeth most likely affected are the maxillary anterior teeth, but all teeth can be affected. The name for this type of caries comes from the fact that the decay usually is a result of allowing children to fall asleep with sweetened liquids in their bottles or feeding children sweetened liquids multiple times during the day.

Another pattern of decay is "rampant caries", which signifies advanced or severe decay on multiple surfaces of many teeth. Rampant caries may be seen in individuals with xerostomia, poor oral hygiene, stimulant use (due to drug-induced dry mouth), and/or large sugar intake. If rampant caries is a result of previous radiation to the head and neck, it may be described as radiation-induced caries. Problems can also be caused by the self-destruction of roots and whole tooth resorption when new teeth erupt or later from unknown causes.

Children at 6–12 months are at increased risk of developing dental caries. For other kids aged 12–18 months, dental caries develop on primary teeth and approximately twice yearly for permanent teeth.

Dental fluorosis (also termed mottled enamel) is an extremely common disorder, characterized by hypomineralization of tooth enamel caused by ingestion of excessive fluoride during enamel formation.

It appears as a range of visual changes in enamel causing degrees of intrinsic tooth discoloration, and, in some cases, physical damage to the teeth. The severity of the condition is dependent on the dose, duration, and age of the individual during the exposure. The "very mild" (and most common) form of fluorosis, is characterized by small, opaque, "paper" white areas scattered irregularly over the tooth, covering less than 25% of the tooth surface. In the "mild" form of the disease, these mottled patches can involve up to half of the surface area of the teeth. When fluorosis is moderate, all of the surfaces of the teeth are mottled and teeth may be ground down and brown stains frequently "disfigure" the teeth. Severe fluorosis is characterized by brown discoloration and discrete or confluent pitting; brown stains are widespread and teeth often present a corroded-looking appearance.

People with fluorosis are relatively resistant to dental caries (tooth decay caused by bacteria), although they may be of cosmetic concern. In moderate to severe fluorosis, teeth are physically damaged.

Tooth wear (also termed non-carious tooth substance loss) refers to loss of tooth substance by means other than dental caries or dental trauma. Tooth wear is a very common condition that occurs in approximately 97% of the population. This is a normal physiological process occurring throughout life, but accelerated tooth wear can become a problem.

Tooth wear is majorly the result of three processes; attrition, abrasion and erosion. These forms of tooth wear can further lead to a condition known as abfraction, where by tooth tissue is 'fractured' due to stress lesions caused by extrinsic forces on the enamel. Tooth wear is a complex, multi-factorial problem and there is difficulty identifying a single causative factor. However, tooth wear is often a combination of the above processes. Many clinicians therefore make diagnoses such as "tooth wear with a major element of attrition", or "tooth wear with a major element of erosion" to reflect this. This makes the diagnosis and management difficult. Therefore, it is important to distinguish between these various types of tooth wear, provide an insight into diagnosis, risk factors, and causative factors, in order to implement appropriate interventions.

Multiple indices have been developed in order to assess and record the degree of tooth wear, the earliest was that by Paul Broca. In 1984, Smith and Knight developed the tooth wear index (TWI) where four visible surfaces (buccal, cervical, lingual, occlusal-incisal) of all teeth present are scored for wear, regardless of the cause.

There are many signs of dental erosion, including changes in appearance and sensitivity. One of the physical changes can be the color of teeth. There are two different colors teeth may turn if dental erosion is occurring, the first being a change of color that usually happens on the cutting edge of the central incisors. This causes the cutting edge of the tooth to become transparent. A second sign is if the tooth has a yellowish tint. This occurs because the white enamel has eroded away to reveal the yellowish dentin. A change in shape of the teeth is also a sign of dental erosion. Teeth will begin to appear with a broad rounded concavity, and the gaps between teeth will become larger. There can be evidence of wear on surfaces of teeth not expected to be in contact with one another. If dental erosion occurs in children, a loss of enamel surface characteristics can occur. Amalgam restorations in the mouth may be clean and non-tarnished. Fillings may also appear to be rising out of the tooth, the appearance being caused when the tooth is eroded away leaving only the filling. The teeth may form divots on the chewing surfaces when dental erosion is occurring. This mainly happens on the first, second, and third molars. One of the most severe signs of dental erosion is cracking, where teeth begin to crack off and become coarse. Other signs include pain when eating hot, cold, or sweet foods. This pain is due to the enamel having been eroded away, exposing the sensitive dentin.

Supernumerary teeth can be classified by shape and by position. The shapes include the following:

- Supplemental (where the tooth has a normal shape for the teeth in that series);

- Tuberculate (also called "barrel shaped");

- Conical (also called "peg shaped");

- Compound odontoma (multiple small tooth-like forms);

- Complex odontoma (a disorganized mass of dental tissue)

When classified by position, a supernumerary tooth may be referred to as a "mesiodens", a "paramolar", or a "distomolar".

The most common supernumerary tooth is a mesiodens, which is a malformed, peg-like tooth that occurs between the maxillary central incisors.

Fourth and fifth molars that form behind the third molars are another kind of supernumerary teeth.

The term primary failure of eruption was named by Dr. William Proffit and Dr. Katherine Vig in 1981. This type of failure of eruption has a genetic or familial background precursor as a cause. The prevalence is of PFE is about 0.06% in population. In this type of failure, teeth that are non-ankylosed fail to erupt in the mouth. These teeth do not have a precursor tooth that is blocking their path. These teeth tend to erupt partially but then fail to erupt as the time goes on. Profitt stated that only the posterior teeth are the ones to be affected and all the teeth which are distal to the affected tooth are also affected. Both permanent and primary teeth may equally be affected. This often results in posterior open bite in patients mouth who have primary failure of eruption. This phenomenon can occur in any quadrant of the mouth.

There are two types of primary failure of eruption. Type I involves failure of eruption of teeth distal to the most mesial affected tooth to be all same. Type II involves a greater eruption pattern, not complete, among the teeth distal to the most mesial affected tooth. It is difficult to diagnose between these two types of failure of eruption because 2nd molar does not erupt until a patient is 15 years of age. Plenty of times, patient's receive orthodontic care much before they turn 15 years old. Therefore, to properly diagnose between two types, a patient needs to be over 15 and a definitive proof of uneruption of 2nd molar is required.