Nabers probe is used to check for furcation involvement clinically. Recently, cone beam computerised technology (CBCT) has also be used to detect furcation. Periapical and interproximal intraoral radiographs can help diagnosing and locating the furcation. The location and severity of furcation should be recorded in patient’s notes.

Only multirooted teeth have furcation. Therefore, upper first premolar, maxillary and mandibular molars may be involved.

Upper premolars have one buccal and one palatal root. Furcation involvement should be checked from the mesial and the distal aspects of the tooth.

Maxillary molars have three roots, a mesio-buccal root, disto-buccal root and a palatal root. Thus, check for furcation from buccal, mesio-palatal and disto-palatal aspects.

Mandibular molars have one mesial and one distal root, and so, check for involvement from buccal and lingual aspects.

In the 1960s and 1970s, several studies were conducted sponsored by the U.S. Atomic Energy Commission, with the aim of finding a link between genetics and hypodontia.

Although these teeth are usually asymptomatic and pose no threat to the individual, they are often extracted for aesthetic reasons. This is done particularly if the mesiodens is positioned in the maxillary central incisor region. The traditional method of removal is done by using bone chisels, although a more advanced technique has been found to be more beneficial, especially if surgery is required . Through the use of Piezoelectricity, Piezoelectric ultrasonic bone surgery may be more time consuming than the traditional method but it seems to reduce the post-operative bleeding and associated complications quite significantly.

Before root canal treatment or extraction are carried out, the clinician should have thorough knowledge about the root canal morphology to avoid complications.

The treatment aims are to eliminate the bacteria from the exposed surface of the root(s) and to establish the anatomy of the tooth, so that better plaque control can be achieved. Treatment plans for patients differ depending on the local and anatomical factors.

For Grade I furcation, scaling and polishing, root surface debridement or furcationplasty could be done if suitable.

For Grade II furcation, furcationplasty, open debridement, tunnel preparation, root resection, extraction, guided tissue regeneration (GTR) or enamel matrix derivative could be considered.

As for Grade III furcation, open debridement, tunnel preparation, root resection, GTR or tooth extraction could be performed if appropriate.

Tooth extraction is usually considered if there is extensive loss of attachment or if other treatments will not obtain good result (i.e. achieving a nice gingival contour to allow good plaque control).

Usual diagnosis is via radiograph, patient history, biopsy is rarely needed. Periodic follow ups should included additional radiographs that show minimal growth or regression.

The oral rehabilitation of hypodontia, especially where a significant number of teeth have not developed, is often a multidisciplinary process, involving a specialist orthodontist, a consultant in restorative dentistry, and a paediatric dentist in the earlier years. The process of treating and managing hypodontia begins in the early years of the patient's dentition where absent teeth are identified and the process of maintaining the remaining teeth begins. This is largely conducted by the paediatric dentist with orthodontic input. Once all the adult teeth have erupted the orthodontist is likely to liaise with the restorative dentist regarding optimal positioning of teeth for subsequent replacement with prosthodontic methods. This may include the utilisation of a resin-retained bridge and implants for spaces or composite resin, veneers or crowns where teeth are diminutive or misshaped.

A non-vital tooth is necessary for the diagnosis of a periapical cyst, meaning the nerve has been removed by root canal therapy. Oral examination of the surrounding intraoral anatomical structures should be palpated to identify the presence of bone expansion or displacement of tooth roots as well as crepitus noises during examination, indicating extensive bone damage. Bulging of the buccal or lingual cortical plates may be present. Age of occurrence in the patient, the location of the cyst, the edges of cystic contours, and the impact that the cyst has on adjacent structures must all be considered for proper diagnosis.

Several lesions can appear similarly in radiographic appearance. Intraoral X-rays or a 3-D cone beam scan of the affected area can be used to obtain radiological images and confirm diagnosis of cysts in the periapical area. Circular or ovoid radiolucency surrounding the root tip of approximately 1-1.5 cm in diameter is indicative of the presence of a periapical cyst. The border of the cyst is seen as a narrow opaque margin contiguous with the lamina dura. In cysts that are actively enlarging, peripheral areas of the margin may not be present. Periapical cysts have a characteristic unilocular shape on radiographs. There is also a severe border of cortication between the cyst and surrounding bone. Pseudocysts, on the other hand, have a fluid filled cavity but are not lined by epithelium, therefore they have a less severe and more blurred border between the fluid and bony surroundings.

Resorption of the roots of affected teeth may also be observed as the absence of portions of normal root structures.

Infected cysts will produce a positive percussion test on the affected tooth as well as a negative response to the pulp test. There may also be visible swelling in the overlying soft tissues. The affected tooth may also exhibit discoloration.

The best method of maintaining the health of teeth is to practice exemplary oral hygiene. More tooth loss is likely to occur if intervention takes place. However, factors such as present complaint, patient age, severity of the problem, can affect the treatment plan or options.

Stainless steel crowns which also known as "hall crowns" can prevent tooth wear and maintain occlusal dimension in affected primary teeth. However, if demanded, composite facings or composite strip crowns can be added for aesthetic reasons.

The presence of a supernumerary tooth, particularly when seen in young children, is associated with a disturbance of the maxillary incisor region. This commonly results in the impaction of the incisors during the mixed dentition stage. The study debating this also considered many other factors such as: the patient’s age, number, morphology, growth orientation and position of the supernumerary tooth. Therefore, the presence of a supernumerary tooth when found must be appropriately approached with the correct treatment plan incorporating the likelihood of incisal crowding.

Treatment for TRs is limited to tooth extraction because the lesion is progressive. Amputation of the tooth crown without root removal has also been advocated in cases demonstrated on a radiograph to be type 2 resorption without associated periodontal or endodontic disease because the roots are being replaced by bone. However, X-rays are recommended prior to this treatment to document root resorption and lack of the periodontal ligament.

Tooth restoration is not recommended because resorption of the tooth will continue underneath the restoration. Use of alendronate has been studied to prevent TRs and decrease progression of existing lesions.

Preventive and restorative care are important as well as esthetics as a consideration. This ensures preservation of the patient's vertical face height between their upper and lower teeth when they bite together. The basis of treatment is standard throughout the different types of DI where prevention, preservation of occlusal face height, maintenance of function, and aesthetic needs are priority. Preventive efforts can limit pathology occurring within the pulp, which may render future endodontic procedures less challenging, with better outcomes.

- Challenges are associated with root canal treatment of teeth affected by DI due to pulp chamber and root canal obliteration, or narrowing of such spaces.

- If root canal treatment is indicated, it should be done in a similar way like with any other tooth. Further consideration is given for restoring the root-treated tooth as it has weaker dentine which may not withstand the restoration.

Preservation of occlusal face height may be tackled by use of stainless steel crowns which are advocated for primary teeth where occlusal face height may be hugely compromised due to loss of tooth tissue as a result of attrition, erosion of enamel.

In most cases, full-coverage crowns or veneers (composite/porcelain) are needed for aesthetic appearance, as well as to prevent further attrition. Another treatment option is bonding, putting lighter enamel on the weakened enamel of the teeth and with lots of treatments of this bonding, the teeth appear whiter to the eye, but the teeth on the inside and under that cover are still the same. Due to the weakened condition of the teeth, many common cosmetic procedures such as braces and bridges are inappropriate for patients with Dentinogenesis imperfecta and are likely to cause even more damage than the situation they were intended to correct.

Dental whitening (bleaching) is contraindicated although it has been reported to lighten the color of DI teeth with some success; however, because the discoloration is caused primarily by the underlying yellow-brown dentin, this alone is unlikely to produce normal appearance in cases of significant discoloration.

If there is considerable attrition, overdentures may be prescribed to prevent further attrition of remaining teeth and for preserving the occlusal face height.

Future studies will look further into the relationship of talon cusp and Rubinstein-Taybi syndrome and other oral-facial-digital syndromes. A former study showed a direct correlation in which 45 affected patients with Rubinstein-Taybi syndrome, 92% of these patients had talon cusp. Other researchers are attempting to trace talon cusp to ancestors and comparing dentition to modern humans. Another study done in 2007 examined the dentition of 301 Native American Indian skeletons for the presence or absence of talon cusp. The results showed five skeletons (2 percent) in the population had the trait.

In 2011, only 21 cases of talon cusp have been reported and are in literature. It appears that as of 2014 and 2015, additional research continues in hopes of finding the cause and mechanism of talon cusp. With the majority of cases of talon cusp being unreported, it remains difficult to conduct tests, come up with conclusions, conduct surgery and perform research with small numbers.

This anomaly is large enough to be seen with the naked eye. One can see the projection on the incisal edge of a tooth looking into the mouth of the affected person. The structure is described to be "T'shaped" or "X-shaped" however will differ depending on its shape, size, structure, location and site of origin. X-rays and radiographs can also show evidence of the abnormality. The digital images would show a tooth with talon cusp as if it were "double teeth".

When looking at a radiograph some features to look for would be location, edge, shape and number. The location would be on an anterior tooth, the edge would be clear and well defined and can be seen even by the naked eye, and the shape would appear "talon-like" over the top portion or crown of the affected tooth. There could potentially be one, two or multiple protrusions depending on the type of cusp.

Talon cusp can fall under three categories: Type I, Type II and Type III. They are created based on the cusp formation shape and length of extension.

- Type I - Talon: The additional cusp or talon projects from the palatal surface of a primary or permanent anterior (front) tooth that extends at least half of the distance from the cemento enamel junction to the incisal edge.

- Type II - Semi Talon: The semi talon cusp measures about 1mm or more in length but extends less than half of the distance seen in Type I Talon.

- Type III - Trace Talon: The projection originates from the cingulum (also known as the "cervical third") of the root and is enlarged or prominent in any form (conical, or tubercle-like)

Since many cases of Talon cusp go unreported, it is hard to draw linkage maps but it is safe to assume that dental formation is influenced by genetic factors. Talon cusp is also seen in association with conditions such as Rubinstein-Taybi syndrome, Mohr syndrome, Ellis–van Creveld syndrome, Incontinentia pigmenti achromians, Berardinelli-Seip syndrome, and Sturge–Weber syndrome.

Unerupted microdonts may require surgical removal to prevent the formation of cysts. Erupted microdonts, peg laterals especially, may cause cosmetic concern. Such teeth may be restored to resemble normal sized teeth, typically with composite build ups or crowns. Orthodontics may be required in severe cases to close gaps between the teeth.

Females are affected more than males, and the condition occurs in permanent (adult) teeth more than deciduous (baby teeth or milk teeth).

Bisphosphonates have recently been introduced to treat several bone disorders, which include osteogenesis imperfecta.

A recognized risk of this drug relevant to dental treatments is bisphosphonate-associated osteonecrosis of the jaw (BRONJ). Occurrences of this risk is associated with dental surgical procedures such as extractions.

Dental professionals should therefore proceed with caution when carrying out any dental procedures in patients who have Type 2 DI who may be on bisphosphonate drug therapy.

The best method for the prevention of knocked-out teeth is the use of helmets and mouth protectors. Mouth protectors can be very inexpensive, however, the compliance rate for their use is poor. Studies have shown that, even when mandated, athletes and other high risk individuals often will not use them. Also, even with their use, mouth guards can be knocked-out, leaving the user unprotected.

Research has shown that there are five million teeth knocked-out each year in the United States.

Up to 25% of school-aged children and military trainees and fighters experience some kind of dental trauma each year. The incidence of dental avulsion in school aged children ranges from 0.5 to 16% of all dental trauma. Many of these teeth are knocked-out during school activities or sporting events such as contact sports, football, basketball, and hockey.It is important for anyone whom is related, working, or witnessing sports that they be educated on this subject matter. Being educated could aid in minimizing injuries that could do further harm to the victim. Being informed and spreading awareness of dental avulsion in the state of knowledge, treatment, and prevention could make an impact.

Supernumerary roots is a condition found in teeth there may be a larger number of roots than expected. The most common teeth affected are mandibular (lower) canines, premolars, and molars, especially third molars. Canines and most premolars, except for maxillary (upper) first premolars, usually have one root. Maxillary first premolars and mandibular molars usually have two roots. Maxillary molars usually have three roots. When an extra root is found on any of these teeth, the root is described as a supernumerary root.

Taurodontism is a condition found in the molar teeth of humans whereby the body of the tooth and pulp chamber is enlarged vertically at the expense of the roots. As a result, the floor of the pulp and the furcation of the tooth is moved apically down the root. The underlying mechanism

of taurodontism is the failure or late invagination of Hertwig's epithelial root sheath, which is responsible for root formation and shaping causing an apical shift of the root furcation.

The constriction at the amelocemental junction is usually reduced or absent. Taurodontism is most commonly found in permanent dentition although the term is traditionally applied to molar teeth.

In some cases taurodontism seems to follow an autosomal dominant type of inheritance.

Taurodontism is found in association with amelogenesis imperfecta, ectodermal dysplasia and tricho-dento-osseous syndrome.

The term means "bull like" teeth derived from similarity of these teeth to those of ungulate or cud-chewing animals.

According to Shaw these can be classified as hypotaurodont, hypertaurodont and mesotaurodont.

According to Mangion taurodontism may be:

- A (mentally retarded) character

- A primitive pattern

- Mendelian recessive character

- Atavistic feature

- A mutation

It has also been reported in Klinefelter's syndrome, XXYY and Down's syndrome .

The teeth involved are invariably molars, sometimes single and at the other times multiple teeth may be involved. The teeth themselves may look normal and do not have any particular anatomical character on clinical examination.

On a dental radiograph, the involved tooth looks rectangular in shape without apical taper. The pulp chamber is extremely large and the furcations may be only a few millimeters long at times.

1-coronal

2-radicular

Types

- Type 1-That is confined to the crown

- Type 2-Extend below CEJ and ends in a blind sac that may or may not communicate with adjacent dental pulp

- Type 3-Extend to the root and perforate in the apex or lateral radicular area without communicating the pulp

The phenomenon of gemination arises when two teeth develop from one tooth bud and, as a result, the patient has an extra tooth, in contrast to fusion, where the patient would appear to be missing one tooth.

Fused teeth arise through union of two normally separated tooth germs, and depending upon the stage of development of the teeth at the time of union, it may be either complete or incomplete. On some occasions, two independent pulp chambers and root canals can be seen. However, fusion can also be the union of a normal tooth bud to a supernumerary tooth germ. In these cases, the number of teeth is also normal and differentiation from gemination may be very difficult, if not impossible. In geminated teeth, division is usually incomplete and results in a large tooth crown that has a single root and a single canal. It is an asymptomatic condition.

The prevalence of germination or fusion is 2.5% in primary dentition, and 0.1 - 0.2% in permanent dentition. It is more frequently observed in primary than permanent dentition; anterior than posterior teeth; unilaterally than bilaterally. It commonly occurs in the primary upper incisors.

The phenomenon of tooth fusion arises through union of two normally separated tooth germs, and depending upon the stage of development of the teeth at the time of union, it may be either complete or incomplete. On some occasions, two independent pulp chambers and root canals can be seen. However, fusion can also be the union of a normal tooth bud to a supernumerary tooth germ. In these cases, the number of teeth is fewer if the anomalous tooth is counted as one tooth. In geminated teeth, division is usually incomplete and results in a large tooth crown that has a single root and a single canal. Both gemination and fusion are prevalent in primary dentition, with incisors being more affected.

Tooth gemination, in contrast to fusion, arises when two teeth develop from one tooth bud. When the anomalous tooth appears to be two separate teeth, it appears that the patient has an extra tooth, although they have a normal number of tooth roots.