Fertilisers like ammonium phosphate, calcium ammonium nitrate, urea can be supplied. Foliar spray of urea can be a quick method.

The visual symptoms of nitrogen deficiency mean that it can be relatively easy to detect in some plant species. Symptoms include poor plant growth, and leaves that are pale green or yellow because they are unable to make sufficient chlorophyll. Leaves in this state are said to be chlorotic. Lower leaves (older leaves) show symptoms first, since the plant will move nitrogen from older tissues to more important younger ones. Nevertheless, plants are reported to show nitrogen deficiency symptoms at different parts. For example, Nitrogen deficiency of tea is identified by retarded shoot growth and yellowing of younger leaves.

However, these physical symptoms can also be caused by numerous other stresses, such as deficiencies in other nutrients, toxicity, herbicide injury, disease, insect damage or environmental conditions. Therefore, nitrogen deficiency is most reliably detected by conducting quantitative tests in addition to assessing the plants visual symptoms. These tests include soil tests and plant tissue test.

Plant tissue tests destructively sample the plant of interest. However, nitrogen deficiency can also be detected non-destructively by measuring chlorophyll content.

Chlorophyll content tests work because leaf nitrogen content and chlorophyll concentration are closely linked, which would be expected since the majority of leaf nitrogen is contained in chlorophyll molecules. Chlorophyll content can be detected with a Chlorophyll content meter; a portable instrument that measures the greenness of leaves to estimate their relative chlorophyll concentration.

Chlorophyll content can also be assessed with a chlorophyll fluorometer, which measures a chlorophyll fluorescence ratio to identify phenolic compounds that are produced in higher quantities when nitrogen is limited. These instruments can therefore be used to non-destructively test for nitrogen deficiency.

The most widely used potassium fertilizer is potassium chloride (muriate of potash). Other inorganic potassium fertilizers include potassium nitrate, potassium sulfate, and monopotassium phosphate. Potassium-rich treatments suitable for organic farming include feeding with home-made comfrey liquid, adding seaweed meal, composted bracken, and compost rich in decayed banana peels. Wood ash also has high potassium content. Adequate moisture is necessary for effective potassium uptake; low soil water reduces K uptake by plant roots. Liming acidic soils can increase potassium retention in some soils by reducing leaching; practices that increase soil organic matter can also increase potassium retention.

Diagnosis of clinical poisoning is generally made by documenting exposure, identifying the neurologic signs, and analyzing serum for alpha-mannosidase activity and swainsonine.

In mule deer, clinical signs of locoism are similar to chronic wasting disease. Histological signs of vacuolation provide a differential diagnosis.

Sub-clinical intoxication has been investigated in cattle grazing on "Astragalus mollissimus". As the estimated intake of swainsonine increased, blood serum alpha-mannosidase activity and albumin decreased, and alkaline phosphatase and thyroid hormone increased.

The diagnosis by symptoms is not reliable enough so it’s better to do a molecular diagnosis based in test samples. Some of these methods (like Dot-blot hybridisation) allow the scientists to detect the viroid even six months before noticing the first symptoms.

The first step is the purification to obtain the nucleic acids of the plant cells. The leaves of the plant located four or more below the spare leaf are cut. Afterwards, they are blended (homogenize) with sodium sulfite. Then the extract is filtered and clarified by centrifugation (10.000 g during 10 minutes). The next step is to add polyethylene glycol (PEG). Finally, after nearly two hours of incubation at 4 °C, and after another centrifugation (at low speed) the nucleic acids can be extracted by chloroform procedures, for example.

When approximately 1 g of coconut tissue has been purified, the electrophoresis method can be started, which will help to identify the viroid by its relative mobility. The CCCVd is analysed in one or two dimensional polyacrylamide gels with a silver stain.

The viroid can also be detected by a more sensitive method called dot blot molecular hybridization. In this method CCCVd is amplified by the PCR (polymerase chain reaction) and the clones of CCCVd are used as templates to synthesize a complementary DNA or RNA chain. These sequences are radioactively labelled so when they are put over the samples with the intention to analyse (on a supporting membrane) and exposed to x-ray film, then if CCCVd is present it will appear as a dark colour. This dark tonality only appears when nucleic acid hybridisation occurs.

Detecting phosphorus deficiency can take multiple forms. A preliminary detection method is a visual inspection of plants. Darker green leaves and purplish or red pigment can indicate a deficiency in phosphorus. This method however can be an unclear diagnosis because other plant environment factors can result in similar discoloration symptoms. In commercial or well monitored settings for plants, phosphorus deficiency is diagnosed by scientific testing. Additionally, discoloration in plant leaves only occurs under fairly severe phosphorus deficiency so it is beneficial to planters and farmers to scientifically check phosphorus levels before discoloration occurs. The most prominent method of checking phosphorus levels is by soil testing. The major soil testing methods are Bray 1-P, Mehlich 3, and Olsen methods. Each of these methods are viable but each method has tendencies to be more accurate in known geographical areas. These tests use chemical solutions to extract phosphorus from the soil. The extract must then be analyzed to determine the concentration of the phosphorus. Colorimetry is used to determine this concentration. With the addition of the phosphorus extract into a colorimeter, there is visual color change of the solution and the degree to this color change is an indicator of phosphorus concentration. To apply this testing method on phosphorus deficiency, the measured phosphorus concentration must be compared to known values. Most plants have established and thoroughly tested optimal soil conditions. If the concentration of phosphorus measured from the colorimeter test is significantly lower than the plant’s optimal soil levels, then it is likely the plant is phosphorus deficient. The soil testing with colorimetric analysis, while widely used, can be subject to diagnostic problems as a result of interference from other present compounds and elements. Additional phosphorus detection methods such as spectral radiance and inductively coupled plasma spectrometry (ICP) are also implemented with the goal of improving reading accuracy. According to the World Congress of Soil Scientists, the advantages of these light-based measurement methods are their quickness of evaluation, simultaneous measurements of plant nutrients, and their non-destructive testing nature. Although these methods have experimental based evidence, unanimous approval of the methods has not yet been achieved.

Calcium deficiency can sometimes be rectified by adding agricultural lime to acid soils, aiming at a pH of 6.5, unless the subject plants specifically prefer acidic soil. Organic matter should be added to the soil to improve its moisture-retaining capacity. However, because of the nature of the disorder (i.e. poor transport of calcium to low transpiring tissues), the problem cannot generally be cured by the addition of calcium to the roots. In some species, the problem can be reduced by prophylactic spraying with calcium chloride of tissues at risk.

Plant damage is difficult to reverse, so corrective action should be taken immediately, supplemental applications of calcium nitrate at 200 ppm nitrogen, for example. Soil pH should be tested, and corrected if needed, because calcium deficiency is often associated with low pH.

Early fruit will generally have the worst systems, with them typically lessening as the season progresses. Preventative measures, such as irrigating prior to especially high temperatures and stable irrigation will minimize the occurrence.

Boric acid (16.5%boron), borax (11.3% boron) or SoluBor (20.5% boron) can be applied to soils to correct boron deficiency. Typical applications of actual boron are about 1.1 kg/hectare or 1.0 lb/acre but optimum levels of boron vary with plant type. Borax, Boric Acid or Solubor can be dissolved in water and sprayed or applied to soil as a dust. Excess boron is toxic to plants so care must be taken to ensure correct application rate and even coverage. Leaves of many plants are damaged by boron; therefore, when in doubt, only apply to soil. Application of boron may not correct boron deficiency in alkaline soils because even with the addition of boron, it may remain unavailable for plant absorption. Continued application of boron may be necessary in soils that are susceptible to leaching such as sandy soils. Flushing soils containing toxic levels of boron with water can remove the boron through leaching.

Manganese deficiency is easy to cure and homeowners have several options when treating these symptoms. The first is to adjust the soil pH. Two materials commonly used for lowering the soil pH are aluminum sulfate and sulfur. Aluminum sulfate will change the soil pH instantly because the aluminum produces the acidity as soon as it dissolves in the soil. Sulfur, however, requires some time for the conversion to sulfuric acid with the aid of soil bacteria. If the soil pH is not a problem and there is no manganese actually in the soil then Foliar feeding for small plants and medicaps for large trees are both common ways for homeowners to get manganese into the plant.

Disease cures are almost always more expensive and less effective than simple prevention measures. Often precautions involve maintaining a stable aquarium that is adjusted for the specific species of fish that are kept and not over-crowding a tank or over-feeding the fish. Common preventive strategies include avoiding the introduction of infected fish, invertebrates or plants by quarantining new additions before adding them to an established tank, and discarding water from external sources rather than mixing it with clean water. Similarly, foods for herbivorous fish such as lettuce or cucumbers should be washed before being placed in the tank. Containers that do not have water filters or pumps to circulate water can also increase stress to fish. Other stresses on fish and tanks can include certain chemicals, soaps and detergents, and impacts to tank walls causing shock waves that can damage fish.

In some cases the causes of an infection or disease will be obvious (such as fin rot), though in other cases it may be due to water conditions, requiring special testing equipment and chemicals to appropriately adjust the water. Isolating diseased fish can help prevent the spread of infection to healthy fish in the tank. This also allows the use of chemicals or drugs which may damage the nitrogen cycle, plants or chemical filtration of a properly-functioning tank. Other alternatives include short baths in a bucket that contains the treated water. Salt baths can be used as an antiseptic and fungicide, and will not damage beneficial bacteria, though ordinary table salt may contain additives which can harm fish. Alternatives include aquarium salt, Kosher salt or rock salt. Gradually raising the temperature of the tank may kill certain parasites, though some diseased fish may be harmed and certain species can not tolerate high temperatures. Aeration is necessary since less oxygen is dissolved in warm water.

There are a number of effective treatments for many stains of bacterial infections. Three of the most common are tetracycline, penicillin and naladixic acid. Salt baths are another effective treatment.

Potassium deficiency, also known as potash deficiency, is a plant disorder that is most common on light, sandy soils, because potassium ions (K) are highly soluble and will easily leach from soils without colloids. Potassium deficiency is also common in chalky or peaty soils with a low clay content. It is also found on heavy clays with a poor structure.

Physiological plant disorders are caused by non-pathological conditions such as poor light, adverse weather, water-logging, phytotoxic compounds or a lack of nutrients, and affect the functioning of the plant system. Physiological disorders are distinguished from plant diseases caused by pathogens, such as a virus or fungus. While the symptoms of physiological disorders may appear disease-like, they can usually be prevented by altering environmental conditions. However, once a plant shows symptoms of a physiological disorder it is likely that that season’s growth or yield will be reduced.

Fungicides applied specifically for downy mildew control may be unnecessary. Broad spectrum protectant fungicides such as chlorothalonil, mancozeb, and fixed copper are at least somewhat effective in protecting against downy mildew infection. Systemic fungicides are labeled for use against cucurbit downy mildew, but are recommended only after diagnosis of this disease has been confirmed. In the United States, the Environmental Protection Agency has approved oxathiapiprolin for use against downy mildew.

This disease is hard to control because plants can carry the pathogen prior to showing any symptoms. It is important to be aware of where new plants are being planted so that they aren't exposed to disease.

The most effective method to avoid disease is to plant resistant cultivars that are specific to the location of planting. Some examples of resistant cultivars include Allstar, Cardinal, Delite, Honeoye, Jewel and Tennessee Beauty. Examples of susceptible cultivars that should be avoided include Sparkle, Sunrise, Raritan and Catskill.

Amongst the many different management strategies, cultural control practices play a significant role in prevention or reduction of disease. Some common cultural practices that have been used are as follows. In order to have more successful yields, strawberry plants should be planted in well-drained soil, in an area exposed to lots of available sunlight and air circulation. Presence of weeds may reduce air circulation for strawberry plants and create a shaded, moist environment, which would make the plants more wet and susceptible to disease. Therefore, weed growth needs to be prevented, either by chemical or cultural control methods. Immediately after harvest, any severely infected plants and plant debris should be raked, removed and burned completely to get rid of any remaining spores and reduce inoculum of the pathogen.

At the beginning of renovation, which occurs after harvest, one application of nitrogen fertilizers should be applied to help with canopy regrowth. About 4–6 weeks later, it is generally a good time to apply another application of nitrogen fertilization to the developing strawberry plants. This will allow for the plants to absorb nutrients provided by the fertilizer. However, applying too much nitrogen fertilizer throughout the spring, may result in an abundance of young foliage tissues that could be susceptible to disease.

Fungicides are not necessarily required, however if the strawberry grower decides to use fungicides, they should be applied during early in the spring and immediately after renovation. A fungicide spray schedule may also be put into place. It is recommended to spray in intervals of about 2 weeks. Examples of some recommended fungicides are Bulletin 506-B2, Midwest Commercial Small Fruit and Grape Spray Guide for commercial growers and Bulletin 780, Controlling Disease and Insects in Home Fruit Plantings for backyard home growers.

Once boron has been absorbed by the plant and incorporated into the various structures that require boron, it is unable to disassemble these structures and re-transport boron through the plant resulting in boron being a non-mobile nutrient. Due to translocation difficulties the youngest leaves often show deficiency symptoms first.

There is no resistance to Citrus Black Spot and once a tree has been infected there is no known cure causing tree removal to be the best option. Both Federal and State governments have recommended the following preventative measures.

To control "Guignardia citriparpa" fungicides like copper and/or strobilurins should be applied monthly from early May to the middle of September (in the northern hemisphere). Applications of the fungicides are recommended in early April (northern hemisphere) if that month has experienced more rainfall than usual resulting in the ideal conditions for citrus black spot to form.

Table 1. Recommended Chemical Controls for Citrus Black Spot

1)Lower rates can be used on smaller trees. Do not use less than minimum label rate.

2)Mode of action class for citrus pesticides from the Fungicide Resistance Action Committee (FRAC) 20111. Refer to ENY-624, "Pesticide Resistance and Resistance Management," in the 2012 Florida Citrus Pest Management Guide for more details.

3)Do not use more than 4 applications of strobilurin fungicides/season. Do not make more than 2 sequential applications of strobilurin fungicides.

Another method of control is to accelerate the leaf litter decomposition under the trees in citrus groves. Accelerating this decomposition reduces the chance for ascospore inoculation which generally takes place in the middle of March. There are three possible methods to hasten this decomposition. One method is the increase the mircrosprinkler irrigation in the grove to half an hour for at least five days of the week. This form of control should continue for about a month and a half. The second method is to apply urea or ammonium to the leaf litter. The last and final method to accelerate leaf decomposition is to apply lime or calcium carbonate to the litter. Urea, lime, and calcium carbonate reduce the number of fungal structures and spore production. Since the fungus requires wet conditions to thrive, air flow in the citrus grove should be maximized to reduce leaf wetness.

Along with these methods it is also important to get rid of debris such as fallen fruit or twigs in a manner that reduces the chances of infecting other plants. Citrus Black Spot can colonize and reproduce on dead twigs. To dispose of citrus debris it should either be heated to a minimum of 180℉ for two hours, incinerated, buried in a landfill, or fed to livestock. Plant trash should be moved with caution if at all to avoid spreading the infectious ascospores. Any trees that are infected with citrus black spot should be removed from the grove and disposed of. These trees must be removed because those that are declining and stressed will often have off season bloom. If there is more than one age of fruit present on the tree, it is possible for the asexual spores on the fruit to be transferred to new fruit, intensifying the disease. This off season blooming is often more problematic with Valencia oranges when old and new crops overlap.

Because "O. sericea" is both frequently encountered and relatively palatable to livestock, it is an important cause of economic losses in livestock production. Keeping livestock away from locoweed infested pasture in spring and fall when grass and other forbs are not actively growing is recommended. Another suggested remedy is to provide palatable supplemental nutrients if animals are to be kept in infested pasture. These remedies take into account livestock preference for locoweed during seasons when grass is dry and not very nutritious. Conditioned food aversion has been used experimentally to discourage livestock from eating it. In horses, a small study has shown promising results using lithium chloride as the aversive agent.

Correction and prevention of phosphorus deficiency typically involves increasing the levels of available phosphorus into the soil. Planters introduce more phosphorus into the soil with bone meal, rock phosphate,manure, and phosphate-fertilizers. The introduction of these compounds into the soil however does not ensure the alleviation of phosphorus deficiency. There must be phosphorus in the soil, but the phosphorus must also be absorbed by the plant. The uptake of phosphorus is limited by the chemical form in which the phosphorus is available in the soil. A large percentage of phosphorus in soil is present in chemical compounds that plants are incapable of absorbing. Phosphorus must be present in soil in specific chemical arrangements to be usable as plant nutrients. Facilitation of usable phosphorus in soil can be optimized by maintaining soil within a specified pH range. Soil acidity, measured on the pH scale, partially dictates what chemical arrangements that phosphorus forms. Between pH 6 and 7, phosphorus makes the fewest number of bonds which render the nutrient unusable to plants. At this range of acidity the likeliness of phosphorus uptake is increased and the likeliness of phosphorus deficiency is decreased. Another component in the prevention and treatment of phosphorus is the plant’s disposition to absorb nutrients. Plant species and different plants within in the same species react differently to low levels of phosphorus in soil. Greater expansion of root systems generally correlate to greater nutrient uptake. Plants within a species that have larger roots are genetically advantaged and less prone to phosphorus deficiency. These plants can be cultivated and bred as a long term phosphorus deficiency prevention method. In conjunction to root size, other genetic root adaptations to low phosphorus conditions such as mycorrhizal symbioses have been found to increase nutrient intake. These biological adaptations to roots work to maintain the levels of vital nutrients. In larger commercial agriculture settings, variation of plants to adopt these desirable phosphorus intake adaptations may be a long-term phosphorus deficiency correction method.

Novel zinc biomarkers, such as the erythrocyte LA:DGLA ratio, have shown promise in pre-clinical and clinical trials and are being developed to more accurately detect dietary zinc deficiency.

Genetic resistance is the preferred disease management strategy because it allows farmers to minimize chemical intervention. Less pesticide and fungicide can encourage biological control agents, reduce production costs, and minimize the chemical residues in fruit. Some genetic varieties of raspberry are better than others for the control of leaf spot. Nova and Jewel Black are both resistant varieties, while Prelude and Honey Queen Golden Raspberry have some resistance, but can be susceptible depending on environmental conditions. Reiville, Canby, Encore and Anne are the most susceptible varieties.

Cultural practices are also important for the management of Raspberry Leaf Spot. Sanitation, which includes the removal of all plant debris and infected canes in the fall, reduces places for the pathogen to overwinter. Pruning the raspberry plants and planting in rows will allow for airflow to dry leaves, creating an uninviting environment for fungi. Furthermore, air flow circulation is important for reducing sporulation and successful infection. Lastly, avoid wounding the plants, as this may provide the fungus with an opportunity to infect.

In all cases of the disease, thorough study of the distribution and intensity should be determined to help choose a management practice that’s cost effective. For example, if the disease is widespread in a pre-commercial stand, destroying the plantation may be the most effective measure. The area can then be replanted with immune or low-susceptible species. Aerial surveying is a viable tool available for use in areas where there are severely damaged systems. Other management tools include:

- Using up to date models to help predict the spread of the disease can help with management choice

- Susceptible species should not be planted within 100 feet of a disease center

- Remove as many infected roots and stumps as possible to avoid inoculation of healthy plants

- Cut all infected trees within the disease center and all uninfected trees within 50 ft of the disease center

- Stumping is an expensive, yet effective measure in gently sloping, high-quality sites with light soils. After an excavator removes the stump, pieces of the root are torn and fragmented so invading soil organisms deter long-term inocula.

- Push-falling is an alternative to post-harvest stumping. Whole trees are pushed over with machinery to expose diseased roots for removal. Push-falling is effective in areas with slopes less than 30 percent and soil textures that are sandy to sandy loam.

- Applications of chemical fumigation (such as chloropicrin) have been unsuccessful in dealing with Laminated root rot.

Manganese deficiency can be easy to spot in plants because, much like magnesium deficiency, the leaves start to turn yellow and undergo interveinal chlorosis. The difference between these two is that the younger leaves near the top of the plant show symptoms first because manganese is not mobile while in magnesium deficiency show symptoms in older leaves near the bottom of the plant.

Coconut cadang-cadang disease has no treatment yet. However, chemotherapy with antibiotics has been tried with tetracycline solutions; antibiotics failed trying to alter progress of the disease since they had no significant effect on any of the studied parameters. When the treated plants were at the early stage, tetracycline injections failed to prevent the progression of the palms to more advanced stages, nor did they affect significantly the mean number of spathes or nuts. Penicillin treatment had no apparent improvement either.

Control strategies are elimination of reservoir species, vector control, mild strain protection and breeding for host resistance. Eradication of diseased plants is usually performed to minimize spread but is of dubious efficacy due to the difficulties of early diagnosis as the virus etiology remains unknown and the one discovered are the three main stages in the disease development.

Certain techniques can be used to determine which pathogen is causing disease. One standard technique for distinguishing strains is microscopy. Under a microscope, "M. pinodes" can be diagnosed by the presence of pseudothecia. "P pinodella" can be diagnosed by the size of conidia produced. "P. pinodella" produces conidia that are smaller than the conidia of "M. pinodes" or "A. pisi". "A. pisi" can be diagnosed by the color of the conidia. In comparison to the light colored, buff spore masses of "M. pinodes" and "P. pinodella" produced on oatmeal agar, "A. pisi" spores masses are carrot red.

Other techniques for diagnosis involve serological assays, isoenzyme analysis, restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNA (RAPD) assays, and by using monoclonal antibodies.