International Organization for Standardization helps set standards for monitoring environments, analyzing data, and interpreting results.

Heat alert programs should be developed for implementation when hotter than normal temperatures, or a heat wave occurs.

Mild disease can be treated with fluids by mouth. In more significant disease spraying with mist and using a fan is useful. For those with severe disease putting them in lukewarm water is recommended if possible with transport to a hospital.

Prevention includes avoiding medications that can increase the risk of heat illness (e.g. antihypertensives, diuretics, and anticholinergics), gradual adjustment to heat, and sufficient fluids and electrolytes.

First aid for heat exhaustion includes:

- Moving the person to a cool place

- Having the patient take off extra layers of clothes

- Cooling the patient down by fanning them and putting wet towels on their body

- Having them lie down and put their feet up if they are feeling dizzy

- Having them drink water or sports drinks – but only if they are awake, not confused nor vomiting

- Turning the person on their side if they are vomiting

If a person with heat exhaustion gets medical treatment, Emergency Medical Technicians (EMTs) or doctors and/or nurses may also:

- Give them supplemental oxygen

- Give them intravenous fluids and electrolytes if they are too confused to drink and/or are vomiting

While needlestick injuries have the potential to transmit bacteria, protozoa, viruses and prions, the risk of contracting hepatitis B, hepatitis C, and HIV is the highest. The World Health Organization estimated that in 2000, 66,000 hepatitis B, 16,000 hepatitis C, and 1,000 HIV infections were caused by needlestick injuries. In places with higher rates of blood-borne diseases in the general population, healthcare workers are more susceptible to contracting these diseases from a needlestick injury.

Hepatitis B carries the greatest risk of transmission, with 10% of exposed workers eventually showing seroconversion and 10% having symptoms. Higher rates of hepatitis B vaccination among the general public and healthcare workers have reduced the risk of transmission; non-healthcare workers still have a lower HBV vaccine rate and therefore a higher risk. The hepatitis C transmission rate has been reported at 1.8%, but newer, larger surveys have shown only a 0.5% transmission rate. The overall risk of HIV infection after percutaneous exposure to HIV-infected material in the health care setting is 0.3%. Individualized risk of blood-borne infection from a used biomedical sharp is further dependent upon additional factors. Injuries with a hollow-bore needle, deep penetration, visible blood on the needle, a needle located in a deep artery or vein, or a biomedical device contaminated with blood from a terminally ill patient increase the risk for contracting a blood-borne infection.

After a needlestick injury, certain procedures must be followed to minimize the risk of infection. Lab tests of the recipient should be obtained for baseline studies, including HIV, acute hepatitis panel (HAV IgM, HBsAg, HB core IgM, HCV) and for immunized individuals, HB surface antibody. Unless already known, the infectious status of the source needs to be determined. Unless the source is known to be negative for HBV, HCV, and HIV, post-exposure prophylaxis (PEP) should be initiated, ideally within one hour of the injury.

If the status of the source patient is unknown, their blood should be tested for HIV as soon as possible following exposure. The injured person can start antiretroviral drugs for PEP as soon as possible, preferably within three days of exposure. There is no vaccine for HIV. When the source of blood is known to be HIV positive, a 3-drug regimen is recommended by the CDC; those exposed to blood with a low viral load or otherwise low risk can use a 2-drug protocol. The antivirals are taken for 4 weeks and can include nucleoside reverse transcriptase inhibitors (NRTIs), nucleotide reverse transcriptase inhibitors (NtRTIs), Non-nucleoside reverse transcriptase inhibitors (NNRTIs), protease inhibitors (PIs), or fusion inhibitors. All of these drugs can have severe side effects. PEP may be discontinued if the source of blood tests HIV-negative. Follow-up of all exposed individuals includes counseling and HIV testing for at least six months after exposure. Such tests are done at baseline, 6 weeks, 12 weeks, and 6 months and longer in specific circumstances, such as co-infection with HCV.

There are many methods of preventing or reducing industrial injuries, including anticipation of problems by risk assessment, safety training, control banding, personal protective equipment safety guards, mechanisms on machinery, and safety barriers. In addition, past problems can be analyzed to find their root causes by using a technique called root cause analysis. A 2013 Cochrane review found low-quality evidence showing that inspections, especially focused inspections, can reduce work-related injuries in the long term.

When ambient temperature is excessive, humans and many animals cool themselves below ambient by evaporative cooling of sweat (or other aqueous liquid; saliva in dogs, for example); this helps prevent potentially fatal hyperthermia. The effectiveness of evaporative cooling depends upon humidity. Wet-bulb temperature, which takes humidity into account, or more complex calculated quantities such as wet-bulb globe temperature (WBGT), which also takes solar radiation into account, give useful indications of the degree of heat stress and are used by several agencies as the basis for heat-stress prevention guidelines. (Wet-bulb temperature is essentially the lowest skin temperature attainable by evaporative cooling at a given ambient temperature and humidity.)

A sustained wet-bulb temperature exceeding 35 °C is likely to be fatal even to fit and healthy people unclothed in the shade next to a fan; at this temperature, environmental heat gain instead of loss occurs. , wet-bulb temperatures only very rarely exceeded 30 °C anywhere, although significant global warming may change this.

In cases of heat stress caused by physical exertion, hot environments, or protective equipment, prevention or mitigation by frequent rest breaks, careful hydration, and monitoring body temperature should be attempted. However, in situations demanding one is exposed to a hot environment for a prolonged period or must wear protective equipment, a personal cooling system is required as a matter of health and safety. There is a variety of active or passive personal cooling systems; these can be categorized by their power sources and whether they are person- or vehicle-mounted.

Because of the broad variety of operating conditions, these devices must meet specific requirements concerning their rate and duration of cooling, their power source, and their adherence to health and safety regulations. Among other criteria are the user's need for physical mobility and autonomy. For example, active-liquid systems operate by chilling water and circulating it through a garment; the skin surface area is thereby cooled through conduction. This type of system has proven successful in certain military, law enforcement, and industrial applications. Bomb-disposal technicians wearing special suits to protect against improvised explosive devices (IEDs) use a small, ice-based chiller unit that is strapped to one leg; a liquid-circulating garment, usually a vest, is worn over the torso to maintain a safe core body temperature. By contrast, soldiers traveling in combat vehicles can face microclimate temperatures in excess of 65 °C and require a multiple-user, vehicle-powered cooling system with rapid connection capabilities. Requirements for hazmat teams, the medical community, and workers in heavy industry vary further.

Accurate determination of core temperature often requires a special low temperature thermometer, as most clinical thermometers do not measure accurately below . A low temperature thermometer can be placed in the rectum, esophagus or bladder. Esophageal measurements are the most accurate and are recommended once a person is intubated. Other methods of measurement such as in the mouth, under the arm, or using an infrared ear thermometer are often not accurate.

As a hypothermic person's heart rate may be very slow, prolonged feeling for a pulse could be required before detecting. In 2005, the American Heart Association recommended at least 30–45 seconds to verify the absence of a pulse before initiating CPR. Others recommend a 60-second check.

The classical ECG finding of hypothermia is the Osborn J wave. Also, ventricular fibrillation frequently occurs below and asystole below . The Osborn J may look very similar to those of an acute ST elevation myocardial infarction. Thrombolysis as a reaction to the presence of Osborn J waves is not indicated, as it would only worsen the underlying coagulopathy caused by hypothermia.

The underlying cause must be removed. Mild hyperthemia caused by exertion on a hot day may be adequately treated through self-care measures, such as increased water consumption and resting in a cool place. Hyperthermia that results from drug exposure requires prompt cessation of that drug, and occasionally the use of other drugs as counter measures. Antipyretics (e.g., acetaminophen, aspirin, other nonsteroidal anti-inflammatory drugs) have no role in the treatment of heatstroke because antipyretics interrupt the change in the hypothalamic set point caused by pyrogens; they are not expected to work on a healthy hypothalamus that has been overloaded, as in the case of heatstroke. In this situation, antipyretics actually may be harmful in patients who develop hepatic, hematologic, and renal complications because they may aggravate bleeding tendencies.

When body temperature is significantly elevated, mechanical cooling methods are used to remove heat and to restore the body's ability to regulate its own temperatures. Passive cooling techniques, such as resting in a cool, shady area and removing clothing can be applied immediately. Active cooling methods, such as sponging the head, neck, and trunk with cool water, remove heat from the body and thereby speed the body's return to normal temperatures. Drinking water and turning a fan or dehumidifying air conditioning unit on the affected person may improve the effectiveness of the body's evaporative cooling mechanisms (sweating).

Sitting in a bathtub of tepid or cool water (immersion method) can remove a significant amount of heat in a relatively short period of time. It was once thought that immersion in very cold water is counterproductive, as it causes vasoconstriction in the skin and thereby prevents heat from escaping the body core. However, a British analysis of various studies stated: "this has never been proven experimentally. Indeed, a recent study using normal volunteers has shown that cooling rates were fastest when the coldest water was used." The analysis concluded that cool water immersion is the most-effective cooling technique for exertional heat stroke. No superior cooling method has been found for non-exertional heat stroke. Thus, aggressive ice-water immersion remains the gold standard for life-threatening heat stroke.

When the body temperature reaches about 40 °C, or if the affected person is unconscious or showing signs of confusion, hyperthermia is considered a medical emergency that requires treatment in a proper medical facility. In a hospital, more aggressive cooling measures are available, including intravenous hydration, gastric lavage with iced saline, and even hemodialysis to cool the blood.

Prevention measures include avoidance of the irritant through its removal from the workplace or through technical shielding by the use of potent irritants in closed systems or automation, irritant replacement or removal and personal protection of the workers.

In order to better prevent and control occupational disease, most countries revise and update their related laws, most of them greatly increasing the penalties in case of breaches of the occupational disease laws. Occupational disease prevention, in general legally regulated, is part of good supply chain management and enables companies to design and ensure supply chain social compliance schemes as well as monitor their implementation to identify and prevent occupational disease hazards.

The diagnosis of heat syncope is done during a physical examination. During the physical exam the practitioner will test the blood pressure of the patient, and the pulse. If the patient is experiencing heat syncope the blood pressure will be low, and the pulse will be elevated. Observation of excess sweating will also be a key sign. Finally, the practitioner will ask questions figuring out the history of the patient's symptoms. If the patient developed symptoms while engaging in physical activity and high temperatures it will then be a true case of heat syncope.

It is usually recommended not to declare a person dead until their body is warmed to a near normal body temperature of greater than , since extreme hypothermia can suppress heart and brain function. Exceptions include if there is an obvious fatal injuries or the chest is frozen so that it cannot be compressed. If a person was buried in an avalanche for more than 35 minutes and is found with a mouth packed full of snow without a pulse, stopping early may also be reasonable. This is also the case if a person's blood potassium is greater than 12 mmol/l.

Those who are stiff with pupils that do not move may survive if treated aggressively. Survival with good function also occasionally occurs even after the need for hours of CPR. Children who have near-drowning accidents in water near can occasionally be revived, even over an hour after losing consciousness. The cold water lowers the metabolism, allowing the brain to withstand a much longer period of hypoxia. While survival is possible, mortality from severe or profound hypothermia remains high despite optimal treatment. Studies estimate mortality at between 38% and 75%.

In those who have hypothermia due to another underlying health problem, when death occurs it is frequently from that underlying health problem.

Slips, trips and falls account for over a third of all injuries that happen at work. Incorrect handling of items was the most common cause of injuries that led to absences from work of more than 7 days. Upper limb injuries represented 47.3% of workplace injuries in 2010-2011, the most common area injured.

In all, over 1,900,000 working days were lost in 2013/2014 due to slips, trips and falls.

Prevention of MSDs relies upon identification of risk factors, either by self-report, observation on the job, or measurement of posture which could lead to MSDs. Once risk factors have been determined, there are several intervention methods which could be used to prevent the development of MSDs. The target of MSD prevention efforts is often the workplace in order to identify incidence rates of both disorders and exposure to unsafe conditions.

Assessment of MSDs are based on self-reports of symptoms and pain as well as physical examination by a doctor. Doctors rely on medical history, recreational and occupational hazards, intensity of pain, a physical exam to locate the source of the pain, and sometimes lab tests, x-rays, or an MRI Doctors look for specific criteria to diagnose each different musculoskeletal disorder, based on location, type, and intensity of pain, as well as what kind of restricted or painful movement a patient is experiencing. A popular measure of MSDs is the Nordic Questionnaire that has a picture of the body with various areas labeled and asks the individual to indicate in which areas they have experienced pain, and in which areas has the pain interfered with normal activity.

The basic treatment for heat syncope is like that for other types of fainting: the patient is positioned in a seating or supine position with legs raised. Water containing salt, or another drink containing electrolytes, is administered slowly, and the patient is moved to a cooler area, such as the shade.

The affected person should rest and recover, because heat syncope can lead to heat stroke or heat exhaustion.

Occupational lung diseases include asbestosis among asbestos miners and those who work with friable asbestos insulation, as well as black lung (coalworker's pneumoconiosis) among coal miners, silicosis among miners and quarrying and tunnel operators and byssinosis among workers in parts of the cotton textile industry.

Occupational asthma has a vast number of occupations at risk.

Bad indoor air quality may predispose for diseases in the lungs as well as in other parts of the body.

Recently published evidence suggest heat stress and strenuous activity-induced cyclic uricosuria and crystalluria as a possible mechanism for the tubular lesion.

Heat cramps, a type of heat illness, are muscle spasms that result from loss of large amount of salt and water through exercise. Heat cramps are associated with cramping in the abdomen, arms and calves. This can be caused by inadequate consumption of fluids or electrolytes. Frequently, they don't occur until sometime later, especially at night or when relaxing. Heavy sweating causes heat cramps, especially when the water is replaced without also replacing salt or potassium.

Although heat cramps can be quite painful, they usually don't result in permanent damage, though they can be a symptom of heat stroke or heat exhaustion. Heat cramps can indicate a more severe problem in someone with heart disease or if they last for longer than an hour.

In order to prevent them, one may drink electrolyte solutions such as sports drinks during exercise or strenuous work or eat potassium-rich foods like bananas and apples. When heat cramps occur, the affected person should avoid strenuous work and exercise for several hours to allow for recovery.

Diagnosis of occupational asthma uses several techniques.

A non-specific bronchial hyperreactivity test can be used to help diagnose occupational asthma. It involves testing with methacholine, after which the forced expiratory volume in 1 second (FEV) of the patient is measured. This test is often used for measuring the intensity of a person's asthma and to confirm that the person needs to be treated for asthma.

Other non specific tests could require the patient to run for a few minutes at a continuous pace. In this case, the individual’s peak expiratory flow rate (PEFR) is measured, showing how fast a person can exhale. PEFR can also be measured at work to see if there is a difference from the PEFR in a controlled environment. Measuring PEFR at work is a highly reliable test for occupational asthma.

A skin prick test is usually performed on the inner forearm where a grid is marked and a drop of the allergens to be tested are placed on the arm in the grid. Once this has been done, the skin is pricked through the drop using a lancet. Reactions, if any, occur within 10 to 15 minutes and these results can then be analyzed.

Immunoglobulin E is an antibody found in human blood and is effective against toxins. Since it can also trigger allergic reactions to specific allergens like pollen, the IgE test is performed to evaluate whether the subject is allergic to these substances.

A spirometer is a device used to measure timed expired and inspired volumes, and can be used to help diagnose occupational asthma.

Specific inhalation challenges test for reactions to substances found in the workplace. One method is a whole body sealed chamber where the patient is exposed to articles that are present in their workplace. This method has the advantage of being able to assess, albeit highly subjectively, ocular and nasal symptoms as well as a reduction in FEV. Another test requires the patient to breathe aerosols of the suspected asthmagens through an oro-facial mask. These asthmagens are aerosolized using closed circuit chambers, and the quantities and concentrations administered are minute and extremely stable, to minimize the risk of exaggerated responses.

Berylliosis is an occupational disease. Relevant occupations are those where beryllium is mined, processed or converted into metal alloys, or where machining of metals containing beryllium and recycling of scrap alloys occurs. It is associated with aerospace manufacturing, microwave semiconductor electronics, beryllium mining or manufacturing of fluorescent light bulbs (which once contained beryllium compounds in their internal phosphor coating). Beryllia was used in lamp manufacture because of ceramic's obvious virtues for insulation and heat resistance, and also because beryllia could be made transparent. Certain welding anodes along with other electrical contacts and even non-sparking tools are made of beryllium copper alloy and the subsequent machining of such materials would cause the disease as well.

Prevention of occupational asthma can be accomplished through better education of workers, management, unions and medical professionals. This will enable them to identify the risk factors and put in place preventive measures, including respiratory protection and exposure limits.