There have been numerous accounts of patients with "trichophyton" fungal infections and associated asthma, which further substantiates the likelihood of respiratory disease transmission to the healthcare provider being exposed to the microbe-laden nail dust In 1975, a dermatophyte fungal infection was described in a patient with severe tinea. The resulting treatment for mycosis improved the patient’s asthmatic condition. The antifungal treatment of many other "trichophyton" foot infections has alleviated symptoms of hypersensitivity, asthma, and rhinitis.

Chronic exposure to human nail dust is a serious occupational hazard that can be minimized by not producing such dust. Best practice is to avoid electrical debridement or burring of mycotic nails unless the treatment is necessary. When the procedure is necessary, it is possible to reduce exposure by using nail dust extractors, local exhaust, good housekeeping techniques, personal protective equipment such as gloves, glasses or goggles, face shields, and an appropriately fitted disposable respirators to protect against the hazards of nail dust and flying debris.

Berylliosis is an occupational disease. Relevant occupations are those where beryllium is mined, processed or converted into metal alloys, or where machining of metals containing beryllium and recycling of scrap alloys occurs. It is associated with aerospace manufacturing, microwave semiconductor electronics, beryllium mining or manufacturing of fluorescent light bulbs (which once contained beryllium compounds in their internal phosphor coating). Beryllia was used in lamp manufacture because of ceramic's obvious virtues for insulation and heat resistance, and also because beryllia could be made transparent. Certain welding anodes along with other electrical contacts and even non-sparking tools are made of beryllium copper alloy and the subsequent machining of such materials would cause the disease as well.

The United States Environmental Protection Agency (EPA) does not generally recommend sampling unless an occupant of the space has symptoms. Sampling should be performed by a trained professional with specific experience in mold-sampling protocols, sampling methods and the interpretation of findings. It should be done only to make a particular determination, such as airborne spore concentration or identifying a particular species. Before sampling, a subsequent course of action should be determined.

In the U.S., sampling and analysis should follow the recommendations of the Occupational Safety and Health Administration (OSHA), National Institute for Occupational Safety and Health (NIOSH), the EPA and the American Industrial Hygiene Association (AIHA).

Types of samples include air, surface, bulk, and swab. Air is the most common form of sampling to assess mold levels. Indoor and outdoor air are sampled, and their mold-spore levels compared. Air sampling often identifies hidden mold. Surface sampling measures the number of mold spores deposited on indoor surfaces, collected on tape or in dust. Bulk removal of material from the contaminated area is used to identify and quantify the mold in the sample. With swab, a cotton swab is rubbed across the area being sampled, often a measured area, and subsequently sent to the mold testing laboratory. Final results indicate mold levels and species located in suspect area.

Multiple types of sampling are recommended by the AIHA, since each has limitations; for example, air samples will not identify a hidden mold source and a tape sample cannot determine the level of contamination in the air.

To avoid misdiagnosis as nail psoriasis, lichen planus, contact dermatitis, nail bed tumors such as melanoma, trauma, or yellow nail syndrome, laboratory confirmation may be necessary. The three main approaches are potassium hydroxide smear, culture and histology. This involves microscopic examination and culture of nail scrapings or clippings. Recent results indicate the most sensitive diagnostic approaches are direct smear combined with histological examination, and nail plate biopsy using periodic acid-Schiff stain. To reliably identify nondermatophyte molds, several samples may be necessary.

There are four classic types of onychomycosis:

- Distal subungual onychomycosis is the most common form of "tinea unguium" and is usually caused by "Trichophyton rubrum", which invades the nail bed and the underside of the nail plate.

- White superficial onychomycosis (WSO) is caused by fungal invasion of the superficial layers of the nail plate to form "white islands" on the plate. It accounts for around 10 percent of onychomycosis cases. In some cases, WSO is a misdiagnosis of "keratin granulations" which are not a fungus, but a reaction to nail polish that can cause the nails to have a chalky white appearance. A laboratory test should be performed to confirm.

- Proximal subungual onychomycosis is fungal penetration of the newly formed nail plate through the proximal nail fold. It is the least common form of "tinea unguium" in healthy people, but is found more commonly when the patient is immunocompromised.

- Candidal onychomycosis is "Candida" species invasion of the fingernails, usually occurring in persons who frequently immerse their hands in water. This normally requires the prior damage of the nail by infection or trauma.

The differential diagnosis for berylliosis includes:

- Sarcoidosis

- Granulomatous lung diseases

- Tuberculosis

- Fungal infections

- Granulomatosis with polyangiitis

- Idiopathic pulmonary fibrosis

- Hypersensitivity pneumonitis

- Asthma

Of these possibilities, berylliosis presents most similarly to sarcoidosis. Some studies suggest that up to 6% of all cases of sarcoidosis are actually berylliosis.

Definitive diagnosis of berylliosis is based on history of beryllium exposures, documented beryllium sensitivity and granulomatous inflammation on lung biopsy. Given the invasive nature of a lung biopsy diagnosis can also be based on clinical history consistent with berylliosis, abnormal chest x-ray or CT scan findings, an abnormalities in pulmonary function tests.

Establishing beryllium sensitivity is the first step in diagnosis. The beryllium lymphocyte proliferation test (BeLPT) is the standard way of determining sensitivity to beryllium. The test is performed by acquiring either, peripheral blood or fluid from a bronchial alveolar lavage, and lymphocytes are cultured with beryllium sulfate. Cells are then counted and those with elevated number of cells are considered abnormal. Those exposed persons with two abnormal BeLPT tested with peripheral blood, or one abnormal and one borderline result, are considered beryllium sensitized. Also, those with one abnormal BeLPT tested with fluid from a bronchial alveolar lavage are considered sensitized.

Chest radiography findings of berylliosis are non-specific. Early in the disease radiography findings are usually normal. In later stages interstitial fibrosis, pleural irregularities, hilar lymphadenopathy and ground-glass opacities have been reported. Findings on CT are also not specific to berylliosis. Findings that are common in CT scans of people with berylliosis include parenchymal nodules in early stages. One study found that ground-glass opacities were more commonly seen on CT scan in berylliosis than in sarcoidosis. In later stages hilar lymphadenopathy, intersitial pulmonary fibrosis and pleural thickening.

Affected workers should be offered alternative employment. Continued exposure leads to development of persistent symptoms and progressive decline in FEV1.

The first step in assessment is to non-intrusively determine if mold is present by visually examining the premises; visible mold helps determine the level of remediation necessary. If mold is actively growing and visibly confirmed, sampling for its specific species is unnecessary.

Intrusive observation is sometimes needed to assess the mold level. This includes moving furniture, lifting (or removing) carpets, checking behind wallpaper or paneling, checking ventilation ductwork and exposing wall cavities. Detailed visual inspection and the recognition of moldy odors should be used to find problems. Efforts should focus on areas where there are signs of liquid moisture or water vapor (humidity), or where moisture problems are suspected.

Lung biopsies can be diagnostic in cases of chronic hypersensitivity pneumonitis, or may help to suggest the diagnosis and trigger or intensify the search for an allergen. The main feature of chronic hypersensitivity pneumonitis on lung biopsies is expansion of the interstitium by lymphocytes accompanied by an occasional multinucleated giant cell or loose granuloma.

When fibrosis develops in chronic hypersensitivity pneumonitis, the differential diagnosis in lung biopsies includes the idiopathic interstitial pneumonias. This group of diseases includes usual interstitial pneumonia, non-specific interstitial pneumonia and cryptogenic organizing pneumonia, among others.

The prognosis of some idiopathic interstitial pneumonias, e.g. idiopathic usual interstitial pneumonia (i.e. idiopathic pulmonary fibrosis), are very poor and the treatments of little help. This contrasts the prognosis (and treatment) for hypersensitivity pneumonitis, which is generally fairly good if the allergen is identified and exposures to it significantly reduced or eliminated. Thus, a lung biopsy, in some cases, may make a decisive difference.

Feline asthma and other respiratory diseases may be prevented by cat owners by eliminating as many allergens as possible. Allergens that can be found in a cat’s habitual environment include: pollen, molds, dust from cat litter, perfumes, room fresheners, carpet deodorizers, hairspray, aerosol cleaners, cigarette smoke, and some foods. Avoid using cat litters that create lots of dust, scented cat litters or litter additives. Of course eliminating all of these can be very difficult and unnecessary, especially since a cat is only affected by one or two. It can be very challenging to find the allergen that is creating asthmatic symptoms in a particular cat and requires a lot of work on both the owner’s and the veterinarian's part. But just like any disease, the severity of an asthma attack can be propelled by more than just the allergens, common factors include: obesity, stress, parasites and pre-existing heart conditions. Dry air encourages asthma attacks so keep a good humidifier going especially during winter months.

Once suspected, the diagnosis of blastomycosis can usually be confirmed by demonstration of the characteristic broad based budding organisms in sputum or tissues by KOH prep, cytology, or histology. Tissue biopsy of skin or other organs may be required in order to diagnose extra-pulmonary disease. Blastomycosis is histologically associated with granulomatous nodules. Commercially available urine antigen testing appears to be quite sensitive in suggesting the diagnosis in cases where the organism is not readily detected. While culture of the organism remains the definitive diagnostic standard, its slow growing nature can lead to delays in treatment of up to several weeks. However, sometimes blood and sputum cultures may not detect blastomycosis.

Diagnosis of occupational asthma uses several techniques.

A non-specific bronchial hyperreactivity test can be used to help diagnose occupational asthma. It involves testing with methacholine, after which the forced expiratory volume in 1 second (FEV) of the patient is measured. This test is often used for measuring the intensity of a person's asthma and to confirm that the person needs to be treated for asthma.

Other non specific tests could require the patient to run for a few minutes at a continuous pace. In this case, the individual’s peak expiratory flow rate (PEFR) is measured, showing how fast a person can exhale. PEFR can also be measured at work to see if there is a difference from the PEFR in a controlled environment. Measuring PEFR at work is a highly reliable test for occupational asthma.

A skin prick test is usually performed on the inner forearm where a grid is marked and a drop of the allergens to be tested are placed on the arm in the grid. Once this has been done, the skin is pricked through the drop using a lancet. Reactions, if any, occur within 10 to 15 minutes and these results can then be analyzed.

Immunoglobulin E is an antibody found in human blood and is effective against toxins. Since it can also trigger allergic reactions to specific allergens like pollen, the IgE test is performed to evaluate whether the subject is allergic to these substances.

A spirometer is a device used to measure timed expired and inspired volumes, and can be used to help diagnose occupational asthma.

Specific inhalation challenges test for reactions to substances found in the workplace. One method is a whole body sealed chamber where the patient is exposed to articles that are present in their workplace. This method has the advantage of being able to assess, albeit highly subjectively, ocular and nasal symptoms as well as a reduction in FEV. Another test requires the patient to breathe aerosols of the suspected asthmagens through an oro-facial mask. These asthmagens are aerosolized using closed circuit chambers, and the quantities and concentrations administered are minute and extremely stable, to minimize the risk of exaggerated responses.

Flavorings-related lung disease can be prevented with the use of engineering controls (e.g. exhaust hoods or closed systems), personal protective equipment, monitoring of potentially affected workers, worker education, and by not using lung-disease-causing flavorings.

Prevention measures include avoidance of the irritant through its removal from the workplace or through technical shielding by the use of potent irritants in closed systems or automation, irritant replacement or removal and personal protection of the workers.

In order to better prevent and control occupational disease, most countries revise and update their related laws, most of them greatly increasing the penalties in case of breaches of the occupational disease laws. Occupational disease prevention, in general legally regulated, is part of good supply chain management and enables companies to design and ensure supply chain social compliance schemes as well as monitor their implementation to identify and prevent occupational disease hazards.

The diagnosis is based upon a history of symptoms after exposure to the allergen and clinical tests. A physician may take blood tests, seeking signs of inflammation, a chest X-ray and lung function tests. The sufferer shows a restrictive loss of lung function.

Precipitating IgG antibodies against fungal or avian antigens can be detected in the laboratory using the traditional Ouchterlony immunodiffusion method wherein 'precipitin' lines form on agar plate. The ImmunoCAP technology has replaced this time consuming, labor-intensive method with their automated CAP assays and FEIA (Fluorescence enzyme immunoassay) that can detect IgG antibodies against Aspergillus fumigatus (Farmer's lung or for ABPA) or avian antigens (Bird Fancier's Lung).

Although overlapping in many cases, hypersensitivity pneumonitis may be distinguished from occupational asthma in that it is not restricted to only occupational exposure, and that asthma generally is classified as a type I hypersensitivity. Unlike asthma, hypersensitivity pneumonitis targets lung alveoli rather than bronchi.

Owners often notice their cat coughing several times per day. Cat coughing sounds different from human coughing, usually sounding more like the cat is passing a hairball. Veterinarians will classify the severity of feline asthma based on the medical signs. There are a number of diseases that are very closely related to feline asthma which must be ruled out before asthma can be diagnosed. Lungworms, heartworms, upper and lower respiratory infections, lung cancer, cardiomyopathy and lymphocytic plasmacytic stomatitis all mimic asthmatic symptoms. Medical signs, pulmonary radiographs, and a positive response to steroids help confirm the diagnosis.

While radiographs can be helpful for diagnosis, airway sampling through transtracheal wash or bronchoalveolar lavage is often necessary. More recently, computed tomography has been found to be more readily available and accurate in distinguishing feline tracheobronchitis from bronchopneumonia.

Mortality rate in treated cases

- 0-2% in treated cases among immunocompetent patients

- 29% in immunocompromised patients

- 40% in the subgroup of patients with AIDS

- 68% in patients presenting as acute respiratory distress syndrome (ARDS)

Testing is available to help identify any environmental or food allergies. Caregivers and clinicians can assess the child for the development of an allergy by noting the presence of signs and symptoms and history of exposure.

Prevention of occupational asthma can be accomplished through better education of workers, management, unions and medical professionals. This will enable them to identify the risk factors and put in place preventive measures, including respiratory protection and exposure limits.

Cork is often harvested from the cork oak ("Quercus suber") and stored in slabs in a hot and humid environment until covered in mold. Cork workers may be exposed to organic dusts in this process, leading to this disease.

Patient history should reveal exposure to cotton, flax, hemp, or jute dust. Diagnostic tests include a lung function test and a chest x ray or CT scan.

Measurable change in lung function before and after working shifts is key to diagnosis. Patients suffering from byssinosis show a significant drop in FEV1 over the course of work shift.

Chest radiographs show areas of opacity due to fibrosis of the pulmonary parenchyma.

There are relatively simple tests for radon gas. Radon test kits are commercially available. The short-term radon test kits used for screening purposes are inexpensive, in many cases free. Discounted test kits can be purchased online through The National Radon Program Services at Kansas State University or through state radon offices. Information about local radon zones and specific state contact information can be accessed through the EPA Map at https://www.epa.gov/radon/find-information-about-local-radon-zones-and-state-contact-information. The kit includes a collector that the user hangs in the lowest livable floor of the dwelling for 2 to 7 days. Charcoal canisters are another type of short-term radon test, and are designed to be used for 2 to 4 days. The user then sends the collector to a laboratory for analysis. Both devices are passive, meaning that they do not need power to function.

It should be noted that the accuracy of the residential radon test depends upon the lack of ventilation in the house when the sample is being obtained. Thus, the occupants will be instructed not to open windows, etc., for ventilation during the pendency of test, usually two days or more.

Long-term kits, taking collections for 3 months up to one year, are also available. An open-land test kit can test radon emissions from the land before construction begins. A Lucas cell is one type of long-term device. A Lucas cell is also an active device, or one that requires power to function. Active devices provide continuous monitoring, and some can report on the variation of radon and interference within the testing period. These tests usually require operation by trained testers and are often more expensive than passive testing. The National Radon Proficiency Program (NRPP) provides a list of radon measurement professionals.

Radon levels fluctuate naturally. An initial test might not be an accurate assessment of a home's average radon level. Transient weather can affect short term measurements. Therefore, a high result (over 4 pCi/L) justifies repeating the test before undertaking more expensive abatement projects. Measurements between 4 and 10 pCi/L warrant a long-term radon test. Measurements over 10 pCi/L warrant only another short-term test so that abatement measures are not unduly delayed. Purchasers of real estate are advised to delay or decline a purchase if the seller has not successfully abated radon to 4 pCi/L or less.

Since radon concentrations vary substantially from day to day, single grab-type measurements are generally not very useful, except as a means of identifying a potential problem area, and indicating a need for more sophisticated testing. The EPA recommends that an initial short-term test be performed in a closed building. An initial short-term test of 2 to 90 days allows residents to be informed quickly in case a home contains high levels of radon. Long-term tests provide a better estimate of the average annual radon level.

Some ways to prevent airborne diseases include washing hands, using appropriate hand disinfection, getting regular immunizations against diseases believed to be locally present, wearing a respirator and limiting time spent in the presence of any patient likely to be a source of infection.

Exposure to a patient or animal with an airborne disease does not guarantee receiving the disease. Because of the changes in host immunity and how much the host was exposed to the particles in the air makes a difference to how the disease affects the body.

Antibiotics are not prescribed for patients to control viral infections. They may however be prescribed to a flu patient for instance, to control or prevent bacterial secondary infections. They also may be used in dealing with air-borne bacterial primary infections, such as pneumonic plague.

Additionally the Centers for Disease Control and Prevention (CDC) has told consumers about vaccination and following careful hygiene and sanitation protocols for airborne disease prevention. Consumers also have access to preventive measures like UV Air purification devices that FDA and EPA-certified laboratory test data has verified as effective in inactivating a broad array of airborne infectious diseases. Many public health specialists recommend social distancing to reduce the transmission of airborne infections.

There are three key elements to the diagnosis of silicosis. First, the patient history should reveal exposure to sufficient silica dust to cause this illness. Second, chest imaging (usually chest x-ray) that reveals findings consistent with silicosis. Third, there are no underlying illnesses that are more likely to be causing the abnormalities. Physical examination is usually unremarkable unless there is complicated disease. Also, the examination findings are not specific for silicosis. Pulmonary function testing may reveal airflow limitation, restrictive defects, reduced diffusion capacity, mixed defects, or may be normal (especially without complicated disease). Most cases of silicosis do not require tissue biopsy for diagnosis, but this may be necessary in some cases, primarily to exclude other conditions.

For uncomplicated silicosis, chest x-ray will confirm the presence of small ( 1 cm) occurs from coalescence of small opacities, particularly in the upper lung zones. With retraction of the lung tissue, there is compensatory emphysema. Enlargement of the hilum is common with chronic and accelerated silicosis. In about 5–10% of cases, the nodes will calcify circumferentially, producing so-called "eggshell" calcification. This finding is not pathognomonic (diagnostic) of silicosis. In some cases, the pulmonary nodules may also become calcified.

A computed tomography or CT scan can also provide a mode detailed analysis of the lungs, and can reveal cavitation due to concomitant mycobacterial infection.