Made by DATEXIS (Data Science and Text-based Information Systems) at Beuth University of Applied Sciences Berlin
Deep Learning Technology: Sebastian Arnold, Betty van Aken, Paul Grundmann, Felix A. Gers and Alexander Löser. Learning Contextualized Document Representations for Healthcare Answer Retrieval. The Web Conference 2020 (WWW'20)
Funded by The Federal Ministry for Economic Affairs and Energy; Grant: 01MD19013D, Smart-MD Project, Digital Technologies
Certain techniques can be used to determine which pathogen is causing disease. One standard technique for distinguishing strains is microscopy. Under a microscope, "M. pinodes" can be diagnosed by the presence of pseudothecia. "P pinodella" can be diagnosed by the size of conidia produced. "P. pinodella" produces conidia that are smaller than the conidia of "M. pinodes" or "A. pisi". "A. pisi" can be diagnosed by the color of the conidia. In comparison to the light colored, buff spore masses of "M. pinodes" and "P. pinodella" produced on oatmeal agar, "A. pisi" spores masses are carrot red.
Other techniques for diagnosis involve serological assays, isoenzyme analysis, restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNA (RAPD) assays, and by using monoclonal antibodies.
The amount of initial inoculum will be reduced when a crop other than corn is planted for ≥2 years in that given area; meanwhile proper tillage methods are carried out. Clean plowing and 1-year crop rotation in the absence of corn allows for greater reductions of the disease as well. Note that conventional tilling can reduce disease but can lead to greater soil erosion.
The most proficient and economical method to reduce yield losses from corn grey leaf spot is by introducing resistant plant varieties. In places where leaf spot occur, these crops can ultimately grow and still be resistant to the disease. Although the disease is not completely eliminated and resistant varieties show disease symptoms, at the end of the growing season, the disease is not as effective in reducing crop yield. SC 407 have been proven to be common corn variety that are resistant to grey leaf spot. If grey leaf spot infection is high, this variety may require fungicide application to achieve full potential. Susceptible varieties should not be planted in previously infected areas (see high risk table).
"F. oxysporum" is a major wilt pathogen of many economically important crop plants. It is a soil-borne pathogen, which can live in the soil for long periods of time, so rotational cropping is not a useful control method. It can also spread through infected dead plant material, so cleaning up at the end of the season is important.
One control method is to improve soil conditions because "F. oxysporum" spreads faster through soils that have high moisture and bad drainage. Other control methods include planting resistant varieties, removing infected plant tissue to prevent overwintering of the disease, using soil and systemic fungicides to eradicate the disease from the soil, flood fallowing, and using clean seeds each year. Applying fungicides depends on the field environment. It is difficult to find a biological control method because research in a greenhouse can have different effects than testing in the field. The best control method found for "F. oxysporum" is planting resistant varieties, although not all have been bred for every forma specialis.
"F. oxysporum" f. sp. "batatas" can be controlled by using clean seed, cleaning up infected leaf and plant material and breeding for resistance. Fungicides can also be used, but are not as effective as the other two because of field conditions during application. Fungicides can be used effectively by dip treating propagation material.
Different races of "F. oxysporum" f. sp. "cubense", Panama disease on banana, can be susceptible, resistant and partially resistant. It can be controlled by breeding for resistance and through eradication and quarantine of the pathogen by improving soil conditions and using clean plant material. Biological control can work using antagonists. Systemic and soil fungicides can also be used.
The main control method for "F. oxysporum" f. sp. "lycopersici", vascular wilt on tomato, is resistance. Other effective control methods are fumigating the infected soil and raising the soil pH to 6.5-7.
The most effective way to control "F. oxysporum" f. sp. "melonis" is to graft a susceptible variety of melon to a resistant root-stock. Resistant cultivars, liming the soil to change soil pH to 6-7, and reducing soil nitrogen levels also help control "F. oxysporum" f. sp. "melonis".
The fungus "Trichoderma viride" is a proven biocontrol agent to control this disease in an environment friendly way.
Control of Leucostoma Canker is possible through a combination of pest and crop management techniques following life cycles of the trees. The strategy is implemented following techniques aimed at reducing number of pathogenic inoculum, minimizing dead or injured tissues to prevent infection, and improving tree health to improve rapid wound healing. Chemical controls have not been very effective at controlling this disease with no fungicides registered specifically for control of "Leucostoma" spp., and demethylation-inhibiting (DMI) fungicides having almost no effect on "L. persoonii".
There are very few things that can be done to control the spread of bacterial soft rots, and the most effective of them have to do with simply keeping sanitary growing practices.
Storage warehouses should be removed of all plant debris, and the walls and floors disinfected with either formaldehyde or copper sulfate between harvests. Injury to plant tissues should be avoided as much as possible, and the humidity and temperature of the storage facility should be kept low using an adequate ventilation system. These procedures have proven themselves to be very effective in the control of storage soft rot of potato in Wisconsin.
It also helps if plants are planted in well-drained soils, at intervals appropriate for adequate ventilation between plants. Few varieties are resistant to the disease and none are immune, so rotating susceptible plants with non-susceptible ones like cereals is a practice positive to limiting soft rot infection.
The control of specific insect vectors is also a good way of controlling disease spread in the field and in storage. Soil and foliage insecticide treatment helps controls the bugs that frequently cause wounds and disseminate the bacteria.
Panama disease is a plant disease of the roots of banana plants. It is a type of Fusarium wilt, caused by the fungal pathogen "Fusarium oxysporum f. sp. cubense" (Foc). The pathogen is resistant to fungicide and cannot be controlled chemically.
During the 1950s, Panama disease wiped out most commercial Gros Michel banana production. The Gros Michel banana was the dominant cultivar of bananas, and the blight inflicted enormous costs and forced producers to switch to other, disease-resistant cultivars. New strains of Panama disease currently threaten the production of today's most popular cultivar, Cavendish.
There are many strategies to cultural management. Establishment of new trees that are disease free by trying to plant trees as soon as they are received from the nursery to reduce the amount of stress the tree undergoes to reduce the amount of dead tissue. Apply insecticides to prevent insects such as, peach tree borer to prevent disease causing conidia from entering wounded parts of the tree that the insects create. Prune trees appropriately and at the correct time when buds start to break to promote wide angled branching. Infection at pruning sites is less common when done during late spring because of the smaller amount of inoculum present at this time. Inspect trees occasionally and removed any dead branches to prevent infection at these sites. Training trees properly also helps foster decreased amount of disease. Training trees during the first season to have branches develop wide crotch angles to sustain long orchard life. Avoid excessive and late fertilization during cold season to avoid low temperature injury. Fertilize trees during the early spring to prevent cold-susceptible growth.
The bacteria can survive in the rhizosphere of other crops such as tomato, carrots, sweet potato, radish, and squash as well as weed plants like lupin and pigweed, so it is very hard to get rid of it completely. When it is known that the bacterium is present in the soil, planting resistant varieties can be the best defense against the disease. Many available beet cultivars are resistant to "Pectobacterium carotovorum" subsp. "betavasculorum", and some examples are provided in the corresponding table. A comprehensive list is maintained by the USDA on the Germplasm Resources Information Network.
Even though some genes associated with root defense response have been identified, the specific mechanism of resistance is unknown, and it is currently being researched.
Fusarium wilt is a common vascular wilt fungal disease, exhibiting symptoms similar to Verticillium wilt. The pathogen that causes Fusarium wilt is "Fusarium oxysporum" ("F. oxysporum"). The species is further divided into forma specialis based on host plant.
Ascochyta blights occur throughout the world and can be of significant economic importance. Three fungi contribute to the ascochyta blight disease complex of pea ("Pisum sativum"). "Ascochyta pinodes" (sexual stage: "Mycosphaerella pinodes") causes Mycosphaerella blight. "Ascochyta pinodella" (synonym: "Phoma medicaginis" var. "pinodella") causes Ascochyta foot rot, and "Ascochyta pisi" causes Ascochyta blight and pod spot. Of the three fungi, "Ascochyta pinodes" is of the most importance. These diseases are conducive under wet and humid conditions and can cause a yield loss of up to fifty percent if left uncontrolled. The best method to control ascochyta blights of pea is to reduce the amount of primary inoculum through sanitation, crop-rotation, and altering the sowing date. Other methods—chemical control, biological control, and development of resistant varieties—may also be used to effectively control ascochyta diseases.
Bacterial soft rots are caused by several types of bacteria, but most commonly by species of gram-negative bacteria, "Erwinia", "Pectobacterium", and "Pseudomonas". It is a destructive disease of fruits, vegetables, and ornamentals found worldwide, and effects genera from nearly all the plant families. The bacteria mainly attack the fleshy storage organs of their hosts (tubers, corms, bulbs, and rhizomes), but they also affect succulent buds, stems, and petiole tissues. With the aid of special enzymes, the plant is turned into a liquidy mush in order for the bacteria to consume the plant cell's nutrients. Disease spread can be caused by simple physical interaction between infected and healthy tissues during storage or transit. The disease can also be spread by insects. Control of the disease is not always very effective, but sanitary practices in production, storing, and processing are something that can be done in order to slow the spread of the disease and protect yields.
Snow mold is a type of fungus and a turf disease that damages or kills grass after snow melts, typically in late winter. Its damage is usually concentrated in circles three to twelve inches in diameter, although yards may have many of these circles, sometimes to the point at which it becomes hard to differentiate between different circles. Snow mold comes in two varieties: pink or gray. While it can affect all types of grasses, Kentucky bluegrass and fescue lawns are least affected by snow mold.
Velvet Blight is a disease that affects the stems, branches, leaves, fruits or trunks of plants and trees. This disease is primarily caused by three fungal species from the genus "Septobasidium": "S. bogoriense", "S. pilosum" and "S. theae".
It is known to affect mainly tea plants ("Thea" genus).
The most studied of these species is "S. bogoriense", most notably due to the work of Ernst Albert Gäumann. "S. bogoriense" is named after the Herbarium Bogoriense (Bogor, West Java, Indonesia) which is the place where it was first identified on the bark of an unspecified tree and named by E. Nyman on June 3, 1898. This species was also listed in Otto Warburg's Monsunia in 1900.
Shot hole disease (also called Coryneum blight) is a serious fungal disease that creates BB-sized holes in leaves, rough areas on fruit, and concentric lesions on branches. The pathogen that causes shot hole disease is "Wilsonomyces carpophilus".
Beet vascular necrosis and rot is a soft rot disease caused by the bacterium Pectobacterium carotovorum" subsp. "betavasculorum, which has also been known as "Pectobacterium betavasculorum" and "Erwinia carotovora" subsp. "betavasculorum". It was classified in the genus "Erwinia" until genetic evidence suggested that it belongs to its own group; however, the name Erwinia is still in use. As such, the disease is sometimes called Erwinia rot today. It is a very destructive disease that has been reported across the United States as well as in Egypt. Symptoms include wilting and black streaks on the leaves and petioles. It is usually not fatal to the plant, but in severe cases the beets will become hollowed and unmarketable. The bacteria is a generalist species which rots beets and other plants by secreting digestive enzymes that break down the cell wall and parenchyma tissues. The bacteria thrive in warm and wet conditions, but cannot survive long in fallow soil. However, it is able to persist for long periods of time in the rhizosphere of weeds and non-host crops. While it is difficult to eradicate, there are cultural practices that can be used to control the spread of the disease, such as avoiding injury to the plants and reducing or eliminating application of nitrogen fertilizer.
Fertilisers like ammonium phosphate, calcium ammonium nitrate, urea can be supplied. Foliar spray of urea can be a quick method.
Two external symptoms help characterize Panama disease of banana:
- Yellow leaf syndrome, the yellowing of the border of the leaves which eventually leads to bending of the petiole.
- Green leaf syndrome, which occurs in certain cultivars, marked by the persistence of the green color of the leaves followed by the bending of the petiole as in yellow leaf syndrome. Internally, the disease is characterized by vascular discoloration. This begins in the roots and rhizomes with a yellowing that proceeds to a red or brown color in the pseudostem.
These symptoms often get confused with the symptoms of bacterial wilt of banana, but there are ways to differentiate between the two diseases:
- Fusarium wilt proceeds from older to younger leaves, but bacterial wilt is the opposite.
- Fusarium wilt has no symptoms on the growing buds or suckers, no exudates visible within the plant, and no symptoms in the fruit. Bacterial wilt can be characterized by distorted or necrotic buds, bacterial ooze within the plant, and fruit rot and necrosis.
Once a banana plant is infected, it will continue to grow and any new leaves will be pale in color. Recovery is rare, but if it does occur any new emerging suckers will already be infected and can propagate disease if planted.
"Fusarium oxysporum f. sp. cubense" (Foc) is most prominent in banana and plantain, but some other similar relatives are also susceptible to infection. Different races of the disease are used to classify different major hosts affected by Foc. Race 1 was the initial outbreak which destroyed much of the world's Gros Michel bananas. Cavendish bananas are resistant to race 1, but tropical race 4 (or subtropical race 4) is the classification for Foc which affects Cavendish. Race 2 affects a cooking and dessert banana, Bluggoe.
Blight refers to a specific symptom affecting plants in response to infection by a pathogenic organism. It is a rapid and complete chlorosis, browning, then death of plant tissues such as leaves, branches, twigs, or floral organs. Accordingly, many diseases that primarily exhibit this symptom are called blights. Several notable examples are:
- Late blight of potato, caused by the water mold "Phytophthora infestans" (Mont.) de Bary, the disease which led to the Great Irish Famine
- Southern corn leaf blight, caused by the fungus "Cochliobolus heterostrophus" (Drechs.) Drechs, anamorph "Bipolaris maydis" (Nisikado & Miyake) Shoemaker, incited a severe loss of corn in the United States in 1970.
- Chestnut blight, caused by the fungus "Cryphonectria parasitica" (Murrill) Barr, has nearly completely eradicated mature American chestnuts in North America.
- Fire blight of pome fruits, caused by the bacterium "Erwinia amylovora" (Burrill) Winslow "et al.", is the most severe disease of pear and also is found in apple and raspberry, among others.
- Bacterial leaf blight of rice, caused by the bacterium "Xanthomonas oryzae" (Uyeda & Ishiyama) Dowson.
- Early blight of potato and tomato, caused by species of the ubiquitous fungal genus "Alternaria"
- Leaf blight of the grasses
On leaf tissue, symptoms of blight are the initial appearance of lesions which rapidly engulf surrounding tissue. However, leaf spot may, in advanced stages, expand to kill entire areas of leaf tissue and thus exhibit blight symptoms.
Blights are often named after their causative agent, for example Colletotrichum blight is named after the fungi "Colletotrichum capsici", and Phytophthora blight is named after the water mold "Phytophthora parasitica".
The visual symptoms of nitrogen deficiency mean that it can be relatively easy to detect in some plant species. Symptoms include poor plant growth, and leaves that are pale green or yellow because they are unable to make sufficient chlorophyll. Leaves in this state are said to be chlorotic. Lower leaves (older leaves) show symptoms first, since the plant will move nitrogen from older tissues to more important younger ones. Nevertheless, plants are reported to show nitrogen deficiency symptoms at different parts. For example, Nitrogen deficiency of tea is identified by retarded shoot growth and yellowing of younger leaves.
However, these physical symptoms can also be caused by numerous other stresses, such as deficiencies in other nutrients, toxicity, herbicide injury, disease, insect damage or environmental conditions. Therefore, nitrogen deficiency is most reliably detected by conducting quantitative tests in addition to assessing the plants visual symptoms. These tests include soil tests and plant tissue test.
Plant tissue tests destructively sample the plant of interest. However, nitrogen deficiency can also be detected non-destructively by measuring chlorophyll content.
Chlorophyll content tests work because leaf nitrogen content and chlorophyll concentration are closely linked, which would be expected since the majority of leaf nitrogen is contained in chlorophyll molecules. Chlorophyll content can be detected with a Chlorophyll content meter; a portable instrument that measures the greenness of leaves to estimate their relative chlorophyll concentration.
Chlorophyll content can also be assessed with a chlorophyll fluorometer, which measures a chlorophyll fluorescence ratio to identify phenolic compounds that are produced in higher quantities when nitrogen is limited. These instruments can therefore be used to non-destructively test for nitrogen deficiency.
As snow mold remains dormant during summer months when other forms of disease fungi are most active, steps to prevent snow mold infestations must be taken near the end of the summer months. While active lawn care such as regular mowing and raking of leaves is typically sufficient to prevent an infestation, the use of chemicals may sometimes be required. Fungicides, which should typically be applied immediately prior to the first large snowfall in an area, can be used if typical cultural methods do not work.
This disease is mainly found in tropical climates in Southern Asia, however some scattering exists:
"W. carpophilus" can remain viable for several months and spores are often airborne. Since the fungi thrive in wet conditions, overhead watering should be avoided. Remove and dispose of any infected buds, leaves, fruit and twigs. In fall, fixed copper or Bordeaux mixture can be applied.
Verticillium wilt is a wilt disease of over 350 species of eudicot plants caused by six species of Verticillium genus, "V. dahliae", "V. albo-atrum", "V. longisporum", V. nubilum, V. theobromae and
V. tricorpus. (See, for example, Barbara, D.J. & Clewes, E. (2003). "Plant pathogenic Verticillium species: how many of them are there?" Molecular Plant Pathology 4(4).297-305. Blackwell Publishing.) Many economically important plants are susceptible including cotton, tomatoes, potatoes, oilseed rape, eggplants, peppers and ornamentals, as well as others in natural vegetation communities. Many eudicot species and cultivars are resistant to the disease and all monocots, gymnosperms and ferns are immune.
Symptoms are superficially similar to "Fusarium" wilts. There is no chemical control for the disease but crop rotation, the use of resistant varieties and deep plowing may be useful in reducing the spread and impact of the disease.
A definitive diagnosis of health effects due to bed bugs requires a search for and finding of the insect in the sleeping environment as symptoms are not sufficiently specific. Other possible conditions with which these conditions can be confused include scabies, allergic reactions, mosquito bites, spider bites, chicken pox and bacterial skin infections. Bed bugs classically form a line of bites colloquially referred to as "breakfast, lunch, and dinner" and rarely feed in the armpit or behind the knee which may help differentiate it from other biting insects. If the number in a house is large a pungent sweet odor may be described.