Individuals of sub-Saharan African descent with ferroportin Q248H are more likely to be diagnosed with African iron overload than individual without ferroportin mutation because individuals with ferroportin Q248H have elevated level of serum ferritin concentration. Individuals of African descent should also avoid drinking traditional beer.

The current reference range for acceptable blood lead concentrations in healthy persons without excessive exposure to environmental sources of lead is less than 5 µg/dL for children. It was less than 25 µg/dL for adults. Previous to 2012 the value for children was 10 (µg/dl). The current biological exposure index (a level that should not be exceeded) for lead-exposed workers in the U.S. is 30 µg/dL in a random blood specimen.

In 2015, US HHS/CDC/NIOSH designated 5 µg/dL (five micrograms per deciliter) of whole blood, in a venous blood sample, as the reference blood lead level for adults. An elevated BLL is defined as a BLL ≥5 µg/dL. This case definition is used by the ABLES program, the Council of State and Territorial Epidemiologists (CSTE), and CDC’s National Notifiable Diseases Surveillance System (NNDSS). Previously (i.e. from 2009 until November 2015), the case definition for an elevated BLL was a BLL ≥10 µg/dL. The U.S. national BLL geometric mean among adults was 1.2 μg/dL in 2009–2010.

Blood lead concentrations in poisoning victims have ranged from 30->80 µg/dL in children exposed to lead paint in older houses, 77–104 µg/dL in persons working with pottery glazes, 90–137 µg/dL in individuals consuming contaminated herbal medicines, 109–139 µg/dL in indoor shooting range instructors and as high as 330 µg/dL in those drinking fruit juices from glazed earthenware containers.

Elevation in ferritin concentration without elevation in transferrin saturation does not rule out an iron overload disorder. This combination can be observed in loss-of-function ferroportin mutation and in aceruloplasminemia. Elevated level of ferritin concentration can be observed in acute or chronic inflammatory process without pathologic iron overload.

Ferritin level above 200 ng/mL (449 pmol/L) in women or 300 ng/mL (674 pmol/L) in men who have no signs of inflammatory disease need additional testing. Transferrin saturation above normal range in male and female also need additional testing.

Chemical evidence of tissue vitamin C deficiency and mild to moderate liver dysfunction are likely to be seen in individuals with African iron overload. Elevation in Gamma-glutamyl transpeptidase can be used as a marker for abnormalities in liver function.

The severity of iron overload can be determined and monitored using a combination of tests. Measurement of serum ferritin indicates for total body iron overload. Liver biopsy measures the iron concentration of liver. It provides the microscopic examination of the liver. Measurement of serum hepcidin levels may be useful in diagnostic for iron overload. MRI can detect the degree of magnetic disruption due to iron accumulation. MRI can measure iron accumulation within the heart, liver, and pituitary. Accumulation of iron in a single organ does not provide proper representation of the total body iron overload.

It is important to use both the imaging techniques and serum ferritin level as indicators to start the therapy of iron overload. Serum level and the imaging techniques can be used as markers for treatment progress.

The amount of iron ingested may give a clue to potential toxicity. The therapeutic dose for iron deficiency anemia is 3–6 mg/kg/day. Toxic effects begin to occur at doses above 10–20 mg/kg of elemental iron. Ingestions of more than 50 mg/kg of elemental iron are associated with severe toxicity.

- A 325-mg tablet of ferrous sulfate heptahydrate has 65 mg (20%) of elemental iron

- A 325-mg tablet of ferrous gluconate has 39 mg (12%) of elemental iron

- A 325-mg tablet of ferrous fumarate has 107.25 mg (33%) of elemental iron

- 200 mg ferrous sulfate, dried, has 65 mg (33%) of elemental iron

In terms of blood values, iron levels above 350–500 µg/dL are considered toxic, and levels over 1000 µg/dL indicate severe iron poisoning.

Diagnosis includes determining the clinical signs and the medical history, with inquiry into possible routes of exposure. Clinical toxicologists, medical specialists in the area of poisoning, may be involved in diagnosis and treatment.

The main tool in diagnosing and assessing the severity of lead poisoning is laboratory analysis of the blood lead level (BLL).

Blood film examination may reveal basophilic stippling of red blood cells (dots in red blood cells visible through a microscope), as well as the changes normally associated with iron-deficiency anemia (microcytosis and hypochromasia). However, basophilic stippling is also seen in unrelated conditions, such as megaloblastic anemia caused by vitamin B12 (colbalamin) and folate deficiencies.

Exposure to lead also can be evaluated by measuring erythrocyte protoporphyrin (EP) in blood samples. EP is a part of red blood cells known to increase when the amount of lead in the blood is high, with a delay of a few weeks. Thus EP levels in conjunction with blood lead levels can suggest the time period of exposure; if blood lead levels are high but EP is still normal, this finding suggests exposure was recent. However, the EP level alone is not sensitive enough to identify elevated blood lead levels below about 35 μg/dL. Due to this higher threshold for detection and the fact that EP levels also increase in iron deficiency, use of this method for detecting lead exposure has decreased.

Blood lead levels are an indicator mainly of recent or current lead exposure, not of total body burden. Lead in bones can be measured noninvasively by X-ray fluorescence; this may be the best measure of cumulative exposure and total body burden. However this method is not widely available and is mainly used for research rather than routine diagnosis. Another radiographic sign of elevated lead levels is the presence of radiodense lines called lead lines at the metaphysis in the long bones of growing children, especially around the knees. These lead lines, caused by increased calcification due to disrupted metabolism in the growing bones, become wider as the duration of lead exposure increases. X-rays may also reveal lead-containing foreign materials such as paint chips in the gastrointestinal tract.

Fecal lead content that is measured over the course of a few days may also be an accurate way to estimate the overall amount of childhood lead intake. This form of measurement may serve as a useful way to see the extent of oral lead exposure from all the diet and environmental sources of lead.

Lead poisoning shares symptoms with other conditions and may be easily missed. Conditions that present similarly and must be ruled out in diagnosing lead poisoning include carpal tunnel syndrome, Guillain–Barré syndrome, renal colic, appendicitis, encephalitis in adults, and viral gastroenteritis in children. Other differential diagnoses in children include constipation, abdominal colic, iron deficiency, subdural hematoma, neoplasms of the central nervous system, emotional and behavior disorders, and intellectual disability.

Later stage treatment consists of cleaning the iron from the blood, using a chelating agent such as deferoxamine. If this fails then dialysis is the next step.

As always, laboratory values have to be interpreted with the lab's reference values in mind and considering all aspects of the individual clinical situation.

Serum ferritin can be elevated in inflammatory conditions; so a normal serum ferritin may not always exclude iron deficiency, and the utility is improved by taking a concurrent C-reactive protein (CRP). The level of serum ferritin that is viewed as "high" depends on the condition. For example, in inflammatory bowel disease the threshold is 100, where as in chronic heart failure (CHF) the levels are 200.

Arsenic may be measured in blood or urine to monitor excessive environmental or occupational exposure, confirm a diagnosis of poisoning in hospitalized victims or to assist in the forensic investigation in a case of fatal over dosage. Some analytical techniques are capable of distinguishing organic from inorganic forms of the element. Organic arsenic compounds tend to be eliminated in the urine in unchanged form, while inorganic forms are largely converted to organic arsenic compounds in the body prior to urinary excretion. The current biological exposure index for U.S. workers of 35 µg/L total urinary arsenic may easily be exceeded by a healthy person eating a seafood meal.

Tests are available to diagnose poisoning by measuring arsenic in blood, urine, hair, and fingernails. The urine test is the most reliable test for arsenic exposure within the last few days. Urine testing needs to be done within 24–48 hours for an accurate analysis of an acute exposure. Tests on hair and fingernails can measure exposure to high levels of arsenic over the past 6–12 months. These tests can determine if one has been exposed to above-average levels of arsenic. They cannot predict, however, whether the arsenic levels in the body will affect health. Chronic arsenic exposure can remain in the body systems for a longer period of time than a shorter term or more isolated exposure and can be detected in a longer time frame after the introduction of the arsenic, important in trying to determine the source of the exposure.

Hair is a potential bioindicator for arsenic exposure due to its ability to store trace elements from blood. Incorporated elements maintain their position during growth of hair. Thus for a temporal estimation of exposure, an assay of hair composition needs to be carried out with a single hair which is not possible with older techniques requiring homogenization and dissolution of several strands of hair. This type of biomonitoring has been achieved with newer microanalytical techniques like Synchrotron radiation based X ray fluorescence (SXRF) spectroscopy and Microparticle induced X ray emission (PIXE).The highly focused and intense beams study small spots on biological samples allowing analysis to micro level along with the chemical speciation. In a study, this method has been used to follow arsenic level before, during and after treatment with Arsenious oxide in patients with Acute Promyelocytic Leukemia.

Blood transfusion is sometimes used to treat iron deficiency with hemodynamic instability. Sometimes transfusions are considered for people who have chronic iron deficiency or who will soon go to surgery, but even if such people have low hemoglobin, they should be given oral treatment or intravenous iron.

There is no consensus on how to treat LID but one of the options is to treat it as an iron-deficiency anemia with ferrous sulfate (Iron(II) sulfate) at a dose of 100 mg x day in two doses (one at breakfast and the other at dinner) or 3 mg x Kg x day in children (also in two doses) during two or three months. The ideal would be to increase the deposits of body iron, measured as levels of ferritin in serum, trying to achieve a ferritin value between 30 and 100 ng/mL. Another clinical study has shown an increase of ferritin levels in those taking iron compared with others receiving a placebo from persons with LID. With ferritin levels higher than 100 ng/mL an increase in infections, etc. has been reported. Another way to treat LID is with an iron rich diet and in addition ascorbic acid or Vitamin C, contained in many types of fruits as oranges, kiwifruits, etc. that will increase 2 to 5-fold iron absorption.

People are continually exposed to metals in the environment. Medical tests can detect metals often, but this is to be expected and alone is not evidence that a person is poisoned. Metal screening tests should not be used unless there is reason to believe that a person has had excessive exposure to metals. People should seek medical testing for poisoning only if they are concerned for a particular reason, and physicians should consider a patient's history and physical examination before conducting tests to detect metals.

First degree relatives of those with primary haemochromatosis should be screened to determine if they are a carrier or if they could develop the disease. This can allow preventive measures to be taken.

Screening the general population is not recommended.

In cases of suspected copper poisoning, penicillamine is the drug of choice, and dimercaprol, a heavy metal chelating agent, is often administered. Vinegar is not recommended to be given, as it assists in solubilizing insoluble copper salts. The inflammatory symptoms are to be treated on general principles, as are the nervous ones.

There is some evidence that alpha-lipoic acid (ALA) may work as a milder chelator of tissue-bound copper. Alpha lipoic acid is also being researched for chelating other heavy metals, such as mercury.

There exist other causes of excess iron accumulation, which have to be considered before haemochromatosis is diagnosed.

- African iron overload, formerly known as Bantu siderosis, was first observed among people of African descent in Southern Africa. Originally, this was blamed on ungalvanised barrels used to store home-made beer, which led to increased oxidation and increased iron levels in the beer. Further investigation has shown that only some people drinking this sort of beer get an iron overload syndrome, and that a similar syndrome occurred in people of African descent who have had no contact with this kind of beer ("e.g.," African Americans). This led investigators to the discovery of a gene polymorphism in the gene for ferroportin which predisposes some people of African descent to iron overload.

- Transfusion haemosiderosis is the accumulation of iron, mainly in the liver, in patients who receive frequent blood transfusions (such as those with thalassaemia).

- Dyserythropoeisis, also known as myelodysplastic syndrome, is a disorder in the production of red blood cells. This leads to increased iron recycling from the bone marrow and accumulation in the liver.

As many of the clinical signs and symptoms of ethylene glycol poisoning are nonspecific and occur in many poisonings the diagnosis is often difficult. It is most reliably diagnosed by the measurement of the blood ethylene glycol concentration. Ethylene glycol in biological fluids can be determined by gas chromatography. Many hospital laboratories do not have the ability to perform this blood test and in the absence of this test the diagnosis must be made based on the clinical presentation of the patient. In this situation a helpful test to diagnose poisoning is the measurement of the osmolal gap. The patients' serum osmolality is measured by freezing point depression and then compared with the predicted osmolality based on the patients' measured sodium, glucose, blood urea nitrogen, and any ethanol that may have been ingested. The presence of a large osmolal gap supports a diagnosis of ethylene glycol poisoning. However, a normal osmolar gap does not rule out ethylene glycol exposure because of wide individual variability.

The increased osmolal gap is caused by the ethylene glycol itself. As the metabolism of ethylene glycol progresses there will be less ethylene glycol and this will decrease the blood ethylene glycol concentration and the osmolal gap making this test less useful. Additionally, the presence of other alcohols such as ethanol, isopropanol, or methanol or conditions such as alcoholic or diabetic ketoacidosis, lactic acidosis, or kidney failure may also produce an elevated osmolal gap leading to a false diagnosis.

Other laboratory abnormalities may suggest poisoning, especially the presence of a metabolic acidosis, particularly if it is characterized by a large anion gap. Large anion gap acidosis is usually present during the initial stage of poisoning. However, acidosis has a large number of differential diagnosis, including poisoning from methanol, salicylates, iron, isoniazid, paracetamol, theophylline, or from conditions such as uremia or diabetic and alcoholic ketoacidosis. The diagnosis of ethylene glycol poisoning should be considered in any patient with a severe acidosis. Urine microscopy can reveal needle or envelope-shaped calcium oxalate crystals in the urine which can suggest poisoning; although these crystals may not be present until the late stages of poisoning. Finally, many commercial radiator antifreeze products have fluorescein added to enable radiator leaks to be detected using a Wood's lamp. Following ingestion of antifreeze products containing ethylene glycol and fluorescein, a Wood's lamp may reveal fluorescence of a patient’s mouth area, clothing, vomitus, or urine which can help to diagnose poisoning.

Iron deficiency can be avoided by choosing appropriate soil for the growing conditions (e.g., avoid growing acid loving plants on lime soils), or by adding well-rotted manure or compost. If iron deficit chlorosis is suspected then check the pH of the soil with an appropriate test kit or instrument. Take a soil sample at surface and at depth. If the pH is over seven then consider soil remediation that will lower the pH toward the 6.5 - 7 range. Remediation includes: i) adding compost, manure, peat or similar organic matter (warning. Some retail blends of manure and compost have pH in the range 7 - 8 because of added lime. Read the MSDS if available. Beware of herbicide residues in manure. Source manure from a certified organic source.) ii) applying Ammonium Sulphate as a Nitrogen fertilizer (acidifying fertilizer due to decomposition of ammonium ion to nitrate in the soil and root zone) iii) applying elemental Sulphur to the soil (oxidizes over the course of months to produce sulphate/sulphite and lower pH). Note: adding acid directly e.g. sulphuric/hydrochloric/citric acid is dangerous as you may mobilize metal ions in the soil that are toxic and otherwise bound. Iron can be made available immediately to the plant by the use of iron sulphate or iron chelate compounds. Two common iron chelates are Fe EDTA and Fe EDDHA. Iron sulphate (Iron(II)_sulfate) and iron EDTA are only useful in soil up to PH 7.1 but they can be used as a foliar spray (Foliar_feeding). Iron EDDHA is useful up to PH 9 (highly alkaline) but must be applied to the soil and in the evening to avoid photodegradation. EDTA in the soil may mobilize Lead, EDDHA does not appear to.

In the United States, overdose exposure to all formulations of "vitamins" was reported by 62,562 individuals in 2004 (nearly 80% [~78%, n=48,989] of these exposures were in children under the age of 6), leading to 53 "major" life-threatening outcomes and 3 deaths (2 from vitamins D and E; 1 from polyvitaminic type formula, with iron and no fluoride). This may be compared to the 19,250 people who died of unintentional poisoning of all kinds in the U.S. in the same year (2004). In 2010, 71,000 exposures to various vitamins and multivitamin-mineral formulations were reported to poison control centers, which resulted in 15 major reactions but no deaths.

Before 1998, several deaths per year were associated with pharmaceutical iron-containing supplements, especially brightly colored, sugar-coated, high-potency iron supplements, and most deaths were children. Unit packaging restrictions on supplements with more than 30 mg of iron have since reduced deaths to 0 or 1 per year. These statistics compare with 59 confirmed deaths due to aspirin poisoning in 2003 and 147 deaths known to be associated with acetaminophen-containing products in 2003.

There are several methods available for diagnosing and monitoring iron loading including:

- Serum ferritin: In males and postmenopausal females, a serum ferritin value of over 300 ng/mL (670 pmol/L) indicates iron overload. In premenopausal females, a serum ferritin value of over 150 or 200 ng/mL (330 or 440 pmol/L) indicates iron overload.

- Liver biopsy

- HFE

- MRI

Serum ferritin testing is a low-cost, readily available, and minimally invasive method for assessing body iron stores. However, the major problem with using it as an indicator of iron overload is that it can be elevated in a range of other medical conditions unrelated to iron levels including infection, inflammation, fever, liver disease, kidney disease, and cancer. Also, total iron binding capacity may be low, but can also be normal.

The standard of practice in diagnosis of haemochromatosis was recently reviewed by Pietrangelo. Positive HFE analysis confirms the clinical diagnosis of haemochromatosis in asymptomatic individuals with blood tests showing increased iron stores, or for predictive testing of individuals with a family history of haemochromatosis. The alleles evaluated by HFE gene analysis are evident in ~80% of patients with haemochromatosis; a negative report for HFE gene does not rule out haemochromatosis. In a patient with negative HFE gene testing, elevated iron status for no other obvious reason, and family history of liver disease, additional evaluation of liver iron concentration is indicated. In this case, diagnosis of haemochromatosis is based on biochemical analysis and histologic examination of a liver biopsy. Assessment of the hepatic iron index (HII) is considered the "gold standard" for diagnosis of haemochromatosis.

Magnetic resonance imaging (MRI) is emerging as a noninvasive alternative to accurately estimate iron deposition levels in the liver as well as heart, joints, and pituitary gland.

Diagnosis of elemental or inorganic mercury poisoning involves determining the history of exposure, physical findings, and an elevated body burden of mercury. Although whole-blood mercury concentrations are typically less than 6 μg/L, diets rich in fish can result in blood mercury concentrations higher than 200 μg/L; it is not that useful to measure these levels for suspected cases of elemental or inorganic poisoning because of mercury's short half-life in the blood. If the exposure is chronic, urine levels can be obtained; 24-hour collections are more reliable than spot collections. It is difficult or impossible to interpret urine samples of patients undergoing chelation therapy, as the therapy itself increases mercury levels in the samples.

Diagnosis of organic mercury poisoning differs in that whole-blood or hair analysis is more reliable than urinary mercury levels.

LID is present in stage 1 and 2, before anemia occurs in stage 3. These first two stages can be interpreted as depletion of iron stores and reduction of effective iron transport.

Stage 1 is characterized by loss of bone marrow iron stores while hemoglobin and serum iron levels remain normal. Serum ferritin falls to less than 20 ng/mL. Increased iron absorption, a compensatory change, results in an increased amount transferrin and consequent increased iron-binding capacity.

Stage 2 - Erythropoiesis is impaired. In spite of an increased level of transferrin, serum iron level is decreased along with transferrin saturation. Erythropoiesis impairment begins when the serum iron level falls to less than 50 μg/dL and transferrin saturation is less than 16%.

In stage 3, anemia (reduced hemoglobin levels) is present but red blood cell appearance remains normal.

Changes in the appearance of red blood cells are the hallmark of stage 4; first microcytosis and then hypochromia develop.

Iron deficiency begins to affect tissues in stage 5, manifesting as symptoms and signs.

Mercury thermometers and mercury light bulbs are not as common as they used to be, and the amount of mercury they contain is unlikely to be a health concern if handled carefully. However, broken items still require careful cleanup, as mercury can be hard to collect and it is easy to accidentally create a much larger exposure problem.

It is difficult to differentiate the effects of low level metal poisoning from the environment with other kinds of environmental harms, including nonmetal pollution. Generally, increased exposure to heavy metals in the environment increases risk of developing cancer.

Without a diagnosis of metal toxicity and outside of evidence-based medicine, but perhaps because of worry about metal toxicity, some people seek chelation therapy to treat autism, cardiovascular disease, Alzheimer's disease, or any sort of neurodegeneration. Chelation therapy does not improve outcomes for those diseases.

Based on the history, the doctor might consider specific tests to monitor organ dysfunction, such as an echocardiogram for heart failure, or blood glucose monitoring for patients with haemochromatosis diabetes.

OSHA has set safety standards for grinding and sharpening copper and copper alloy tools, which are often used in nonsparking applications. These standards are recorded in the Code of Federal Regulations 29 CFR 1910.134 and 1910.1000.

Note: The most important nonsparking copper alloy is beryllium copper, and can lead to beryllium poisoning.

It is unclear if screening pregnant women for iron-deficiency anemia during pregnancy improves outcomes in the United States. The same holds true for screening children who are "6 to 24 months" old.