MIH examination should be carried out on clean, wet teeth. The ideal age for examination is when the child is 8 years old - the age where all permanent first molars and most of the incisors are erupted. The permanent first molar will also still be in a comparatively sound condition without excessive post-eruption breakdown. Judgements of each individual teeth should be recorded, aiding the correct diagnosis of the condition.

There is currently a lack of standardisation in the scoring system and severity indices used to record the diagnosis of MIH. Various systems commonly employed in studies include:

- Modified Defect of Dental Enamel (DDE) Index: This set of criteria allows for enamel defects to be detected, enabling a distinction between demarcated and diffused opacities.

- European Academy of Paediatric Dentistry (EAPD) judgement criteria: This set of criteria was developed in 2003 to standardise classifications for use in epidemiological studies. However, while it allows the categorisation of the enamel condition, it does not address the severity of the enamel condition.

- Molar Hypomineralisation Severity Index (MHSI): This set of criteria has been developed to address deficiencies in indices concerning the severity of hypomineralisation. It is based on both the clinical characteristics of hypomineralised defects and the EAPD judgement criteria.

It is recommended to parents and caregivers to take their children to a dental professional for examination as soon as the first few teeth start to erupt into the oral cavity

. The dental professional will assess all the present dentition for early carious demineralization and may provide recommendations to the parents or caregivers the best way to prevent ECC and what actions to take.

Studies suggest that children who have attended visits within the first few years of life (an early preventive dental visit) potentially experience less dental related issues and incur lower dental related costs throughout their lives.

Based on the optical changes induced in eroded tissue by the lesions, in 2015 Koshoji "et al." also demonstrated in a novel method that using laser speckle images (LSI) it is possible to acquire information on the microstructure of the enamel and detect minimal changes, such as early non-carious lesions. To produce the erosion, the samples were divided into four groups and immersed in 30 ml of a cola-based beverage (pH approximately 2.5) at room temperature. A representative image of the samples under white and laser illumination shows that although there are visible stains in the left portion of each sample due the dye from the cola beverage, structural changes are difficult to assess with the naked eye.

To differentiate the sound and eroded tissues, contrast analysis was performed of the speckle patterns in the images. Since this analysis is, in its essence, the ratio of the standard deviation and average intensity, the LASCA map of the lesion is generally higher than in sound tissue. This phenomenon is demonstrated in the LASCA maps which show the greater prevalence of dark blue on the right side, indicating sound tissue, and lower prevalence on the left side, indicating eroded tissue. The contrast ratio of the LASCA maps demonstrates that laser speckle images are sensitive to even small changes in the microstructure of the surface.

Erosion is highly prevalent in people of all ages. However, an objective diagnostic procedure is still needed, thus the study of the laser speckle imaging for tooth enamel may provide the first low cost objective diagnostic method for this disease. The analysis of laser speckle imaging in the spatial domain is a powerful diagnostic technique that provides information on the surface microstructure of tooth enamel after an acid etching procedure using patterns and LASCA maps. In an erosion model, these patterns are associated with mineral loss from the enamel. This method has proven sensitive to 10 minutes of acid etching on tooth enamel, which is a lesion so incipient that is not likely to be detected in clinical practice even by a trained dentist, besides it is also sensitive to the erosion progression.

To manage the condition, it is important to first diagnose it, describing the type of tooth surface loss, its severity and location. Early diagnosis is essential to ensure tooth wear has not progressed past the point of restoration. A thorough examination is required, because it might give explanation to the aetiology of the TSL.

The examination should include assessment of:

- Temporomandibular joint function and associated musculature

- Orthodontic examination

- Intra oral soft tissue analysis

- Hard tissue analysis

- Location and severity of tooth wear

- Social history, particularly diet

It is important to record severity of tooth wear for monitoring purposes, helping to differentiate between pathological and physiological tooth surface loss. It is essential to determine whether the tooth wear is ongoing or has stabilized. However where generalised, the underlying cause can be assumed to be bruxism. In fast-progressing cases, there is commonly a coexisting erosive diet contributing to tooth surface loss.

The presentation of caries is highly variable. However, the risk factors and stages of development are similar. Initially, it may appear as a small chalky area (smooth surface caries), which may eventually develop into a large cavitation. Sometimes caries may be directly visible. However other methods of detection such as X-rays are used for less visible areas of teeth and to judge the extent of destruction. Lasers for detecting caries allow detection without ionizing radiation and are now used for detection of interproximal decay (between the teeth). Disclosing solutions are also used during tooth restoration to minimize the chance of recurrence.

Primary diagnosis involves inspection of all visible tooth surfaces using a good light source, dental mirror and explorer. Dental radiographs (X-rays) may show dental caries before it is otherwise visible, in particular caries between the teeth. Large areas of dental caries are often apparent to the naked eye, but smaller lesions can be difficult to identify. Visual and tactile inspection along with radiographs are employed frequently among dentists, in particular to diagnose pit and fissure caries. Early, uncavitated caries is often diagnosed by blowing air across the suspect surface, which removes moisture and changes the optical properties of the unmineralized enamel.

Some dental researchers have cautioned against the use of dental explorers to find caries, in particular sharp ended explorers. In cases where a small area of tooth has begun demineralizing but has not yet cavitated, the pressure from the dental explorer could cause a cavity. Since the carious process is reversible before a cavity is present, it may be possible to arrest caries with fluoride and remineralize the tooth surface. When a cavity is present, a restoration will be needed to replace the lost tooth structure.

At times, pit and fissure caries may be difficult to detect. Bacteria can penetrate the enamel to reach dentin, but then the outer surface may remineralize, especially if fluoride is present. These caries, sometimes referred to as "hidden caries", will still be visible on X-ray radiographs, but visual examination of the tooth would show the enamel intact or minimally perforated.

The differential diagnosis for dental caries includes dental fluorosis and developmental defects of the tooth including hypomineralization of the tooth and hypoplasia of the tooth.

The early carious lesion is characterized by demineralization of the tooth surface, altering the tooth's optical properties. Technology utilizing laser speckle image (LSI) techniques may provide a diagnostic aid to detect early carious lesions.

"Relative dentin abrasivity" ("RDA") is a standardised measurement of the abrasive effect that the components of the toothpaste have on a tooth.

The RDA scale was developed by the American Dental Association (ADA). The RDA scale compares toothpaste abrasivity to standard abrasive materials and measures the depth of cut at an average of 1 millimetre per 100,000 brush strokes onto dentine. This comparison generates abrasive values for the dentifrices that would be safe for daily use. In vitro dental studies showed a positive correlation between the highest RDAs and greater dentin wear.

Since 1998, the RDA value is set by the standards DIN EN ISO 11609. Currently, the claim on products such as toothpaste are not regulated by law, however a dentifrice is required to have a level lower than 250 to be considered safe and before being given the ADA seal of approval. The values obtained depend on the size, quantity and surface structure of abrasive used in toothpastes.

While the RDA score has been shown to have a statistically significant correlation to the presence of abrasion, it is not the only contributing factor to consider. Other factors such as the amount of pressure used whilst brushing, the type, thickness and dispersion of bristle in the toothbrush and the time spent brushing are other factors that contribute to dental abrasion.

Personal hygiene care consists of proper brushing and flossing daily. The purpose of oral hygiene is to minimize any etiologic agents of disease in the mouth. The primary focus of brushing and flossing is to remove and prevent the formation of plaque or dental biofilm. Plaque consists mostly of bacteria. As the amount of bacterial plaque increases, the tooth is more vulnerable to dental caries when carbohydrates in the food are left on teeth after every meal or snack. A toothbrush can be used to remove plaque on accessible surfaces, but not between teeth or inside pits and fissures on chewing surfaces. When used correctly, dental floss removes plaque from areas that could otherwise develop proximal caries but only if the depth of sulcus has not been compromised. Other adjunct oral hygiene aids include interdental brushes, water picks, and mouthwashes.

However oral hygiene is probably more effective at preventing gum disease (periodontal disease) than tooth decay. Food is forced inside pits and fissures under chewing pressure, leading to carbohydrate-fueled acid demineralisation where the brush, fluoride toothpaste, and saliva have no access to remove trapped food, neutralise acid, or remineralise demineralised tooth like on other more accessible tooth surfaces. (Occlusal caries accounts for between 80 and 90% of caries in children (Weintraub, 2001).) Higher concentrations of fluoride (>1,000 ppm) in toothpaste also helps prevents tooth decay, with the effect increasing with concentration. Chewing fibre like celery after eating forces saliva inside trapped food to dilute any carbohydrate like sugar, neutralise acid and remineralise demineralised tooth. The teeth at highest risk for carious lesions are the permanent first and second molars due to length of time in oral cavity and presence of complex surface anatomy.

Professional hygiene care consists of regular dental examinations and professional prophylaxis (cleaning). Sometimes, complete plaque removal is difficult, and a dentist or dental hygienist may be needed. Along with oral hygiene, radiographs may be taken at dental visits to detect possible dental caries development in high-risk areas of the mouth (e.g. "bitewing" X-rays which visualize the crowns of the back teeth).

On eruption of the first primary tooth in a child, tooth brushing and cleaning should be performed by an adult. This is important as the plaque that attaches to the surface of the tooth has bacteria that have the ability to cause caries (decay) on the tooth surface.

It is recommended to brush children’s teeth using a soft bristled, age and size appropriate toothbrush and age appropriate toothpaste twice daily, however children below the age of two usually don’t require toothpaste. These researches also suggest that it is suitable to brush children’s teeth until they reach the approximate age of 6; where they will begin to learn adequate dexterity and cognition needed for adequate brushing by themselves. It is encouraged to watch children brushing their teeth until they are competently able to brush appropriately alone.

Pre-formed metal crowns (PMC), also known as stainless steel crowns, can be used to reduce the risk of marginal breakdown, coronal leakage and has a good longevity. The use of preformed metal crowns on MIH-affected molars can prevent further tooth loss, control hypersensitivity and aim to establish correct interproximal and occlusal contact. They are relatively inexpensive and require little preparation.

To prevent further tooth preparation and tissue loss, use of the Hall Technique should also be considered. There advantage is use during any stage of post-eruptive breakdown, but evidence of their efficacy is limited. Although the PMC has evidence to show that it is well accepted, a few of the children and their carers expressed their concerns about the metallic appearances of the restoration.

Discoloration of the front teeth is one of the most common reasons people seek dental care. However, many people with teeth of normal shade ask for them to be whitened. Management of tooth discoloration depends on the cause. Most discoloration is harmless and may or may not be of cosmetic concern to the individual. In other cases it may indicate underlying pathology such as pulp necrosis or rarely a systemic disorder.

Most extrinsic discoloration is readily removed by cleaning the teeth, whether with "whitening" (i.e., abrasive) toothpaste at home, or as treatment carried out by a professional (e.g., scaling and/or polishing). To prevent future buildup of extrinsic stains, identification of the cause (e.g., smoking) is required.

Intrinsic discoloration generally requires one of the many types of tooth bleaching. Alternatively the appearance of the tooth can be hidden with dental restorations (e.g., composite fillings, veneers, crowns).

Preventive and management strategies include the following:

- Avoid sweet and acid foods. Even low sugar contained in fruit is bad for the teeth since it is the sugar/acid exposure time which erodes the teeth, not the amount of sugar.

- Modifying the pH of the food or beverage contributing to the problem, or changing lifestyle to avoid the food or beverage.

- Rinsing immediately after drinking or eating.

- Drinking through a straw

- Avoid abrasive forces. Use a soft bristled toothbrush and brush gently. Avoid brushing immediately after consuming acidic food and drink as teeth will be softened. Leave at least half an hour of time in between. Rinsing with water is better than brushing after consuming acidic foods and drinks.

- Using a remineralizing agent, such as sodium fluoride solution in the form of a fluoride mouthrinse, tablet, or lozenge, immediately before brushing teeth.

- Applying fluoride gels or varnishes to the teeth.

- Drinking milk or using other dairy products.

- Dentine bonding agents applied to areas of exposed dentin

- Use a neutralizing agent such as antacid tablets only as a last-resort. They have negative long-run effects.

- Treating the underlying medical disorder or disease.

It is phenotypically difficult to diagnose between TDO and Amelogenesis imperfecta of the hypomaturation-hypoplasia type with taurodontism (AIHHT) as they are very closely linked phenotypically during adulthood, and the only distinguishing characteristic is found during genetic analysis by Polymerase Chain Reaction (PCR) amplification. This type of test in diagnosis of TDO is only used during research or if there is a concern of genetic issue to a particular individual whose family member has been diagnosed with TDO.

When a diagnosis of bruxism has been confirmed, it is recommended that the patient buy a full-coverage acrylic occlusal splint, such as a Michigan Splint or Tanner appliance, to prevent further bruxism. Patients must be monitored closely, with clinical photographs 6–12 monthly to evaluate if the tooth surface loss is being prevented.

In order for successful treatment of abrasion to occur, the aetiology first needs to be identified. The most accurate way of doing so is completing a thorough medical, dental, social and diet history. All aspects needs to be investigated as in many cases the cause of abrasion can be multi-factorial. Once a definitive diagnosis is completed the appropriate treatment can commence.

Treatment for abrasion can present in varying difficulties depending on the current degree or progress caused by the abrasion. Abrasion often presents in conjunction with other dental conditions such as attrition, decay and erosion however the below treatment is for abrasion alone. Successful treatment focuses on the prevention and progression on the condition and modifies the current habit/s instigating the condition.

Dental fluorosis may or may not be of cosmetic concern. In some cases, there may be varying degrees of negative psychosocial effects. The treatment options are:

- Tooth bleaching

- Micro-abrasion

- Composite fillings

- Veneers

- Crowns

Generally, more conservative options such as bleaching are sufficient for mild cases.

Treatment may include smoothing, fluoride treatment, and crown restoration.

The adequate diagnosis of fluorosis can be diagnosed by visual clinical examination. This requires inspection of dry and clean tooth surfaces under a good lighting. There are individual variations in clinical fluorosis manifestation which are highly dependent on the duration, timing, and dosage of fluoride exposure.There are different classifications to diagnose the severity based on the appearances. The clinical manifestation of mild dental fluorosis is mostly characterised a snow flaking appearance that lack a clear border, opaque, white spots, narrow white lines following the perikymata or patches as the opacities may coalesce with an intact, hard and smooth enamel surface on most of the teeth. With increasing severity, the subsurface enamel, all along the tooth becomes more porous. Enamel may appear yellow/ brown discolouration and/ or many and pitted white-brown lesions that look like cavities. They are often described as “mottled teeth”. Fluorosis does not cause discolouration to the enamel directly, as upon eruption into the mouth, affected permanent teeth are not discoloured yet. In dental enamel, fluorosis causes subsurface porosity or hypomineralizations, which extend toward the dentinal-enamel junction as severity increases. Hence, affected teeth are more susceptible to staining. Due to diffusion of exogenous ions (ex, iron and copper), the stains would develop into the abnormally porous enamel.

The differential diagnosis for this condition includes:

- Turner's hypoplasia (although this is usually more localized)

- Enamel defects caused by an undiagnosed and untreated celiac disease.

- Some mild forms of amelogenesis imperfecta

- Enamel defects caused by infection of a primary tooth predecessor

- Dental caries: Fluorosis-resembling enamel defects are often misdiagnosed as dental caries.

- Dental Trauma: Mechanical trauma to the primary tooth may cause disturbance to the maturation phase of enamel formation, which may result in enamel opacities on the permanent successors.

TDO is a genetic based disorder it is diagnosed based on radiographic imaging, physical characteristics of the disease, and genetic testing if necessary. PCR amplification is used to check for normal and deletion allele, found in the 141 base pair allele. A four base pair deletion in exon 3 is also noted in patients with TDO; deletion in two transcription factor genes DLX-3 and DLX-7 gene (distal-less gene) that occurs by a frameshift mutation, makes this gene shorter than its normal length and non-functional. Radiographs such as cephalometric analysis or panoramic radiograph are used to detect skeletal abnormalities in TDO cases; these radiographs along with the phenotypic effects of the disease are often enough evidence for proper diagnosis. In TDO, radiologic imaging almost always shows evidence of hardening of bone tissue (sclerosis), lesions on the bone structures surrounding the teeth due to decay or trauma, or hard tissue mass. The radiographic testing is non-invasive, and involves the patient to be able to sit or stand in front of the radiographic device with their mouth closed and lips relaxed for approximately one minute. Oral abnormalities are diagnosed by a visual dental examination. A normal oral evaluation would show no signs of broken or fractured teeth, attrition of tooth enamel, no spacing between teeth, no soft tissue mass or sign of dental abscess, and a bite relationship where the mandibular (bottom) teeth interdigitate within a normal plane of 1-2mm behind and underneath the maxillary (top) teeth.

AI can be classified according to their clinical appearances:

- Type 1 - Hypoplastic

Enamel of abnormal thickness due to malfunction in enamel matrix formation. Enamel is very thin but hard & translucent, and may have random pits & grooves. Condition is of autosomal dominant, autosomal recessive, or x-linked pattern. Enamel differs in appearance from dentine radiographically as normal functional enamel.

- Type 2 - Hypomaturation

Enamel has sound thickness, with a pitted appearance. It is less hard compared to normal enamel, and are prone to rapid wear, although not as intense as Type 3 AI. Condition is of autosomal dominant, autosomal recessive, or x-linked pattern. Enamel appears to be comparable to dentine in its radiodensity on radiograpshs.

- Type 3 - Hypocalcified

Enamel defect due to malfunction of enamel calcification, therefore enamel is of normal thickness but is extremely brittle, with an opaque/chalky presentation. Teeth are prone to staining and rapid wear, exposing dentine. Condition is of autosomal dominant and autosomal recessive pattern. Enamel appears less radioopaque compared to dentine on radiographs.

- Type 4: Hypomature hypoplastic enamel with taurodontism

Enamel has a variation in appearance, with mixed features from Type 1 and Type 2 AI. All Type 4 AI has taurodontism in common. Condition is of autosomal dominant pattern.

Other common features may include an anterior open bite, taurodontism, sensitivity of teeth.

Differential diagnosis would include dental fluorosis, molar-incisor hypomineralization, chronological disorders of tooth development.

Treatment and prognosis are usually based upon keeping these teeth and preserving the alveolus. For erupted teeth, endodontics is an option if the tooth is devitalized and restorable. For unerupted teeth, function can be restored with a removable partial denture until all major growth has been completed and a final restoration can be placed.

Preventive and restorative dental care is very important as well as considerations for esthetic issues since the crown are yellow from exposure of dentin due to enamel loss. The main objectives of treatment is pain relief, preserving patient's remaining dentition, and to treat and preserve the patient's occlusal vertical height.

Many factors are to be considered to decide on treatment options such as the classification and severity of AI, the patient's social history, clinical findings etc. There are many classifications of AI but the general management of this condition is similar.

Full-coverage crowns are sometimes being used to compensate for the abraded enamel in adults, tackling the sensitivity the patient experiences. Usually stainless steel crowns are used in children which may be replaced by porcelain once they reach adulthood. These aid with maintaining occlusal vertical dimension.

Aesthetics may be addressed via placement of composite or porcelain veneers, depending on patient factors eg age. If the patient has primary or mixed dentition, lab-made composite veneers may be provided temporarily, to be replaced by permanent porcelain veneers once the patient has stabilized permanent dentition. The patient's oral hygiene and diet should be controlled as well as they play a factor in the success of retaining future restorations.

In the worst-case scenario, the teeth may have to be extracted and implants or dentures are required. Loss of nerves in the affected teeth may occur.

Preventive and restorative care are important as well as esthetics as a consideration. This ensures preservation of the patient's vertical face height between their upper and lower teeth when they bite together. The basis of treatment is standard throughout the different types of DI where prevention, preservation of occlusal face height, maintenance of function, and aesthetic needs are priority. Preventive efforts can limit pathology occurring within the pulp, which may render future endodontic procedures less challenging, with better outcomes.

- Challenges are associated with root canal treatment of teeth affected by DI due to pulp chamber and root canal obliteration, or narrowing of such spaces.

- If root canal treatment is indicated, it should be done in a similar way like with any other tooth. Further consideration is given for restoring the root-treated tooth as it has weaker dentine which may not withstand the restoration.

Preservation of occlusal face height may be tackled by use of stainless steel crowns which are advocated for primary teeth where occlusal face height may be hugely compromised due to loss of tooth tissue as a result of attrition, erosion of enamel.

In most cases, full-coverage crowns or veneers (composite/porcelain) are needed for aesthetic appearance, as well as to prevent further attrition. Another treatment option is bonding, putting lighter enamel on the weakened enamel of the teeth and with lots of treatments of this bonding, the teeth appear whiter to the eye, but the teeth on the inside and under that cover are still the same. Due to the weakened condition of the teeth, many common cosmetic procedures such as braces and bridges are inappropriate for patients with Dentinogenesis imperfecta and are likely to cause even more damage than the situation they were intended to correct.

Dental whitening (bleaching) is contraindicated although it has been reported to lighten the color of DI teeth with some success; however, because the discoloration is caused primarily by the underlying yellow-brown dentin, this alone is unlikely to produce normal appearance in cases of significant discoloration.

If there is considerable attrition, overdentures may be prescribed to prevent further attrition of remaining teeth and for preserving the occlusal face height.

Tetracycline is a broad spectrum antibiotic, and its derivative minocycline is common in the treatment of acne. The drug is able to chelate calcium ions and is incorporated into teeth, cartilage and bone. Ingestion during the years of tooth development causes a yellow-green discoloration of dentin, which is visible through the enamel and fluorescent under ultraviolet light. Later, the tetracycline oxidizes and the staining becomes more brown and no longer fluoresces under UV light. Other drugs derived from tetracycline such as glycylcycline share this side effect. Because tetracyclines cross the placenta, a child may have tooth staining if the drugs are administered during the mother's pregnancy.

Treatment is only required if the occlusion or bite of the person is compromised and causing other dental problems. Multiple long-term clinical problems can arise such as occlusal interferences, aesthetic disturbances, loss of pulp vitality, irritation of tongue during mastication and speech, caries and displacement of the affected tooth. Most people with talon cusp will live their normal lives unless the case is severe and causes a cascade of other dental issues that lead to additional health problems. This dental anomaly would not be considered fatal. Generally talon cusps on lower teeth require no treatment, but talon cusps on upper teeth may interfere with the bite mechanics and may need to be removed or reduced.

Small talon cusps that produce no symptoms or complication for a person can remain untreated. However large talon cusps should not.

Some common treatments include:

- Fissure sealing

- Composite resin restoration

- Reduction of cusp

- Pulpotomy

- Root canal (endodontic treatment)

- Extraction

The condition is usually benign, but it can cause mild irritation to soft tissues around the teeth and the tongue, and if large enough, may pose an aesthetic problem. Talon cusps that are too large are filed down with a motorized file, and then endodontic therapy is administered.

In order to prevent any future dental complications, when talon cusp is present due to an early diagnosis it would be best to see a dentist regularly every six months for routine dental checkups, remain under observation, brush and floss properly and undergo regular topical applications of fluoride gel to prevent caries and to promote enamel strength.

Bisphosphonates have recently been introduced to treat several bone disorders, which include osteogenesis imperfecta.

A recognized risk of this drug relevant to dental treatments is bisphosphonate-associated osteonecrosis of the jaw (BRONJ). Occurrences of this risk is associated with dental surgical procedures such as extractions.

Dental professionals should therefore proceed with caution when carrying out any dental procedures in patients who have Type 2 DI who may be on bisphosphonate drug therapy.