Certain techniques can be used to determine which pathogen is causing disease. One standard technique for distinguishing strains is microscopy. Under a microscope, "M. pinodes" can be diagnosed by the presence of pseudothecia. "P pinodella" can be diagnosed by the size of conidia produced. "P. pinodella" produces conidia that are smaller than the conidia of "M. pinodes" or "A. pisi". "A. pisi" can be diagnosed by the color of the conidia. In comparison to the light colored, buff spore masses of "M. pinodes" and "P. pinodella" produced on oatmeal agar, "A. pisi" spores masses are carrot red.

Other techniques for diagnosis involve serological assays, isoenzyme analysis, restriction fragment length polymorphisms (RFLPs), random amplified polymorphic DNA (RAPD) assays, and by using monoclonal antibodies.

In all cases of the disease, thorough study of the distribution and intensity should be determined to help choose a management practice that’s cost effective. For example, if the disease is widespread in a pre-commercial stand, destroying the plantation may be the most effective measure. The area can then be replanted with immune or low-susceptible species. Aerial surveying is a viable tool available for use in areas where there are severely damaged systems. Other management tools include:

- Using up to date models to help predict the spread of the disease can help with management choice

- Susceptible species should not be planted within 100 feet of a disease center

- Remove as many infected roots and stumps as possible to avoid inoculation of healthy plants

- Cut all infected trees within the disease center and all uninfected trees within 50 ft of the disease center

- Stumping is an expensive, yet effective measure in gently sloping, high-quality sites with light soils. After an excavator removes the stump, pieces of the root are torn and fragmented so invading soil organisms deter long-term inocula.

- Push-falling is an alternative to post-harvest stumping. Whole trees are pushed over with machinery to expose diseased roots for removal. Push-falling is effective in areas with slopes less than 30 percent and soil textures that are sandy to sandy loam.

- Applications of chemical fumigation (such as chloropicrin) have been unsuccessful in dealing with Laminated root rot.

This disease is hard to control because plants can carry the pathogen prior to showing any symptoms. It is important to be aware of where new plants are being planted so that they aren't exposed to disease.

The most effective method to avoid disease is to plant resistant cultivars that are specific to the location of planting. Some examples of resistant cultivars include Allstar, Cardinal, Delite, Honeoye, Jewel and Tennessee Beauty. Examples of susceptible cultivars that should be avoided include Sparkle, Sunrise, Raritan and Catskill.

Amongst the many different management strategies, cultural control practices play a significant role in prevention or reduction of disease. Some common cultural practices that have been used are as follows. In order to have more successful yields, strawberry plants should be planted in well-drained soil, in an area exposed to lots of available sunlight and air circulation. Presence of weeds may reduce air circulation for strawberry plants and create a shaded, moist environment, which would make the plants more wet and susceptible to disease. Therefore, weed growth needs to be prevented, either by chemical or cultural control methods. Immediately after harvest, any severely infected plants and plant debris should be raked, removed and burned completely to get rid of any remaining spores and reduce inoculum of the pathogen.

At the beginning of renovation, which occurs after harvest, one application of nitrogen fertilizers should be applied to help with canopy regrowth. About 4–6 weeks later, it is generally a good time to apply another application of nitrogen fertilization to the developing strawberry plants. This will allow for the plants to absorb nutrients provided by the fertilizer. However, applying too much nitrogen fertilizer throughout the spring, may result in an abundance of young foliage tissues that could be susceptible to disease.

Fungicides are not necessarily required, however if the strawberry grower decides to use fungicides, they should be applied during early in the spring and immediately after renovation. A fungicide spray schedule may also be put into place. It is recommended to spray in intervals of about 2 weeks. Examples of some recommended fungicides are Bulletin 506-B2, Midwest Commercial Small Fruit and Grape Spray Guide for commercial growers and Bulletin 780, Controlling Disease and Insects in Home Fruit Plantings for backyard home growers.

There are numerous steps one has to take to try to manage the disease as best as possible. The aim is at prevention because once the pathogen reaches the cherry trees, disease will surely ensue and there is no cure or remedy to prevent the loss of fruit production as well as the ultimate death of the tree.

The first approach, which is the best approach at an effective management practice would be to eradicate or severely damage the Mountain and Cherry Leafhopper population because the leafhoppers are the number one vectors for this pathogen. To do this, pesticides (i.e. acephate, bifenthrin, cyfluthrin) could be applied or biological control (predators of the leafhopper) could be used. There should be a pre-season application of control measures as well as a post-season application. This is to maximize the effort at controlling both types of leafhoppers (Cherry and Mountain), thus cutting down the starting inoculum at both stages in the life cycle.

Plant varieties that are resistant to "Armillaria" or species are resistant to other environmental or biological stressors. If the infected area has been cleared of trees, plants that are not vulnerable to the disease should be planted for five or so years until "Armillaria" is eradicated. Stump removal is also an effective management tool but can be expensive. Another way to reduce susceptibility is to maintain plant health by regular fertilization (if needed), watering during droughts, and trying not to create wounds on the plant. Fumigation can also be used to reduce the amount of inoculum.

There are very few things that can be done to control the spread of bacterial soft rots, and the most effective of them have to do with simply keeping sanitary growing practices.

Storage warehouses should be removed of all plant debris, and the walls and floors disinfected with either formaldehyde or copper sulfate between harvests. Injury to plant tissues should be avoided as much as possible, and the humidity and temperature of the storage facility should be kept low using an adequate ventilation system. These procedures have proven themselves to be very effective in the control of storage soft rot of potato in Wisconsin.

It also helps if plants are planted in well-drained soils, at intervals appropriate for adequate ventilation between plants. Few varieties are resistant to the disease and none are immune, so rotating susceptible plants with non-susceptible ones like cereals is a practice positive to limiting soft rot infection.

The control of specific insect vectors is also a good way of controlling disease spread in the field and in storage. Soil and foliage insecticide treatment helps controls the bugs that frequently cause wounds and disseminate the bacteria.

The best way to manage SDS is with a resistant variety. One issue is that most resistant varieties are only partially resistant so yield reductions may still occur. Another issue is that the plant needs resistance for SDS and SCN in order to gain true resistance because of their synergistic relationship and most varieties do not have resistance for both. Aside from resistance, the only other ways to control SDS are management practices.

These include:

- Avoid planting in cool, wet conditions

- Plant later when the soil has warmed up

- Try avoiding soil compaction as it creates wet spots in the soil that can increase plant stress and SDS infection rates

- Managing for SCN as this nematode often occurs alongside "F. virguliforme"

- Deep tillage to break up compaction and help the soil warm faster

One common management tactic used in other pathogen management plans is crop rotation. In some cases, disease severity can be reduced but most often it is not effective. This is because of chlamydospores and macroconidia as they can persist in soils for many years.

Fungicides are another common product used to control fungal pathogens. In-furrow applications and seed treatments with fungicides have some effect in decreasing disease instance but in most cases, the timing isn't right and the pathogen can still infect the plants. Foliar applications of fungicides have no effect on disease suppression for SDS because the fungi are found in the soil and mainly the roots of the plants. Most foliar fungicides do not move downward through plants, therefore having no effect on the pathogen.

The bacteria can survive in the rhizosphere of other crops such as tomato, carrots, sweet potato, radish, and squash as well as weed plants like lupin and pigweed, so it is very hard to get rid of it completely. When it is known that the bacterium is present in the soil, planting resistant varieties can be the best defense against the disease. Many available beet cultivars are resistant to "Pectobacterium carotovorum" subsp. "betavasculorum", and some examples are provided in the corresponding table. A comprehensive list is maintained by the USDA on the Germplasm Resources Information Network.

Even though some genes associated with root defense response have been identified, the specific mechanism of resistance is unknown, and it is currently being researched.

Armillaria root rot is a fungal root rot caused by several different members of the genus "Armillaria". The symptoms are variable depending on the host infected, ranging from stunted leaves to chlorotic needles and dieback of twigs and branches. However, all infected hosts display symptoms characteristic of being infected by a white rotting fungus. The most effective ways of management focus on limiting the spread of the fungus, planting resistant species, and removing infected material. This disease poses a threat to the lumber industry as well as affecting recreational areas.

Growth of the bacteria is possible between 32–90 °F, with the most ideal conditions between 70–80 °F. Post-harvest storage and transportation is difficult for tropical and other warm environments when the air is not properly ventilated during these processes. Higher temperatures and high humidity are ideal growing conditions for the bacteria making ventilation a big priority when trying to combat this disease.

Laminated root rot also known as yellow ring rot is caused by the fungal pathogen "Phellinus weirii". Laminated root rot is one of the most damaging root disease amongst conifers in northwestern America and true firs, Douglas-fir, Mountain hemlock, and Western hemlock are highly susceptible to infection with "P. weirii". A few species of plants such as Western white pine and Lodgepole pine are tolerant to the pathogen while Ponderosa pine is resistant to it. Only hardwoods are known to be immune to the pathogen.

Sudden Death Syndrome (SDS) in Soybean plants quickly spread across the southern United States in the 1970s, eventually reaching most agricultural areas of the US. SDS is caused by a Fusarium fungi, more specifically the soil borne root pathogen "Fusarium virguliforme," formerly known as "Fusarium solani" f. sp. "glycines"."." Losses could exceed hundreds of millions of dollars in US soybean markets alone making it one of the most important diseases found in Soybeans across the US

Common spot of strawberry is one of the most common and widespread diseases of strawberry. Common spot of strawberry is caused by the fungus Mycosphaerella fragariae (imperfect stage is "Ramularia tulasnei"). Symptoms of this disease first appear as circular, dark purple spots on the leaf surface. "Mycosphaerella fragariae" is very host specific and only infects strawberry.

Mycosphaerella fragariae is a species from family Mycosphaerellaceae.

Dead arm, sometimes grape canker, is a disease of grapes caused by a deep-seated wood rot of the arms or trunk of the grapevine. As the disease progresses over several years, one or more arms may die, hence the name "dead arm". Eventually the whole vine will die. In the 1970s, dead-arm was identified as really being two diseases, caused by two different fungi, "Eutypa lata" and "Phomopsis viticola" (syn. "Cryptosporella viticola").

Ascochyta blights occur throughout the world and can be of significant economic importance. Three fungi contribute to the ascochyta blight disease complex of pea ("Pisum sativum"). "Ascochyta pinodes" (sexual stage: "Mycosphaerella pinodes") causes Mycosphaerella blight. "Ascochyta pinodella" (synonym: "Phoma medicaginis" var. "pinodella") causes Ascochyta foot rot, and "Ascochyta pisi" causes Ascochyta blight and pod spot. Of the three fungi, "Ascochyta pinodes" is of the most importance. These diseases are conducive under wet and humid conditions and can cause a yield loss of up to fifty percent if left uncontrolled. The best method to control ascochyta blights of pea is to reduce the amount of primary inoculum through sanitation, crop-rotation, and altering the sowing date. Other methods—chemical control, biological control, and development of resistant varieties—may also be used to effectively control ascochyta diseases.

Some bacteriophages, viruses that infect bacteria, have been used as effective controls of bacterial diseases in laboratory experiments. This relatively new technology is a promising control method that is currently being researched. Bacteriophages are extremely host-specific, which makes them environmentally sound as they will not destroy other, beneficial soil microorganisms. Some bacteriophages identified as effective controls of "Pectobacterium carotovorum" subsp. "betavasculorum" are the strains ΦEcc2 ΦEcc3 ΦEcc9 ΦEcc14. When mixed with a fertilizer and applied to inoculated calla lily bulbs in a greenhouse, they reduced diseased tissue by 40 to 70%. ΦEcc3 appeared to be the most effective, reducing the percent of diseased plants from 30 to 5% in one trial, to 50 to 15% in a second trial. They have also been used successfully to reduce rotting in lettuce caused by "Pectobacterium carotovorum" subsp. "carotovorum", a different bacterial species closely related to the one that causes beet vascular necrosis.

While it is more difficult to apply bacteriophages in a field setting, it is not impossible, and laboratory and greenhouse trials are showing bacteriophages to potentially be a very effective control mechanism. However, there are a few obstacles to surmount before field trials can begin. A large problem is that they are damaged by UV light, so applying the phage mixture during the evening will help promote its viability. Also, providing the phages with susceptible non-pathogenic bacteria to replicate with can ensure there is adequate persistence until the bacteriophages can spread to the targeted bacteria. The bacteriophages are unable to kill all the bacteria, because they need a dense population of bacteria in order to effectively infect and spread, so while the phages were able to decrease the number of diseased plants by up to 35%, around 2,000 Colony Forming Units per milliliter (an estimate of living bacteria cells) were able to survive the treatment. Lastly, the use of these bacteriophages places strong selection on the host bacteria, which causes a high probability of developing resistance to the attacking bacteriophage. Thus it is recommended that multiple strains of the bacteriophage be used in each application so the bacteria do not have a chance to develop resistance to any one strain.

Dead arm is a disease that causes symptoms in the common grapevine species, "vitis vinifera", in many regions of the world. This disease is mainly caused by the fungal pathogen, "Phomopsis viticola", and is known to affect many cultivars of table grapes, such as Thompson Seedless, Red Globe, and Flame Seedless. Early in the growing season, the disease can delay the growth of the plant and cause leaves to turn yellow and curl. Small, brown spots on the shoots and leaf veins are very common first symptoms of this disease. Soil moisture and temperature can impact the severity of symptoms, leading to a systemic infection in warm, wet conditions. As the name of this disease suggests, it also causes one or more arms of the grapevine to die, often leading to death of the entire vine.

Disease cures are almost always more expensive and less effective than simple prevention measures. Often precautions involve maintaining a stable aquarium that is adjusted for the specific species of fish that are kept and not over-crowding a tank or over-feeding the fish. Common preventive strategies include avoiding the introduction of infected fish, invertebrates or plants by quarantining new additions before adding them to an established tank, and discarding water from external sources rather than mixing it with clean water. Similarly, foods for herbivorous fish such as lettuce or cucumbers should be washed before being placed in the tank. Containers that do not have water filters or pumps to circulate water can also increase stress to fish. Other stresses on fish and tanks can include certain chemicals, soaps and detergents, and impacts to tank walls causing shock waves that can damage fish.

Quaternary ammonium compounds can be added to the water of infected adult fish and fry. Alternatively, the antibiotic oxytetracycline can be given to adults, fry and broodstock. To prevent the disease, it is necessary to ensure water is pathogen-free and that water hardening is completed effectively for eggs.

In some cases the causes of an infection or disease will be obvious (such as fin rot), though in other cases it may be due to water conditions, requiring special testing equipment and chemicals to appropriately adjust the water. Isolating diseased fish can help prevent the spread of infection to healthy fish in the tank. This also allows the use of chemicals or drugs which may damage the nitrogen cycle, plants or chemical filtration of a properly-functioning tank. Other alternatives include short baths in a bucket that contains the treated water. Salt baths can be used as an antiseptic and fungicide, and will not damage beneficial bacteria, though ordinary table salt may contain additives which can harm fish. Alternatives include aquarium salt, Kosher salt or rock salt. Gradually raising the temperature of the tank may kill certain parasites, though some diseased fish may be harmed and certain species can not tolerate high temperatures. Aeration is necessary since less oxygen is dissolved in warm water.

There are a number of effective treatments for many stains of bacterial infections. Three of the most common are tetracycline, penicillin and naladixic acid. Salt baths are another effective treatment.

Verticillium wilt is a wilt disease of over 350 species of eudicot plants caused by six species of Verticillium genus, "V. dahliae", "V. albo-atrum", "V. longisporum", V. nubilum, V. theobromae and

V. tricorpus. (See, for example, Barbara, D.J. & Clewes, E. (2003). "Plant pathogenic Verticillium species: how many of them are there?" Molecular Plant Pathology 4(4).297-305. Blackwell Publishing.) Many economically important plants are susceptible including cotton, tomatoes, potatoes, oilseed rape, eggplants, peppers and ornamentals, as well as others in natural vegetation communities. Many eudicot species and cultivars are resistant to the disease and all monocots, gymnosperms and ferns are immune.

Symptoms are superficially similar to "Fusarium" wilts. There is no chemical control for the disease but crop rotation, the use of resistant varieties and deep plowing may be useful in reducing the spread and impact of the disease.

Root rot is a condition found in both indoor and outdoor plants, although more common in indoor plants with poor drainage. As the name states, the roots of the plant rot. Usually, this is a result of overwatering. In houseplants, it is a very common problem, and is slightly less common in outdoor plants. In both indoor and outdoor plants, it is usually lethal and there is no effective treatment.

The excess water makes it very difficult for the roots to get the air that they need, causing them to decay. To avoid root rot, it is best to only water plants when the soil becomes dry, and to put the plant in a well-drained pot. Using a heavy soil, such as one dug up from outdoors can also cause root rot.

Many cases of root rot are caused by members of the water mould genus "Phytophthora"; perhaps the most aggressive is "P. cinnamomi". Spores from root rot causing agents do contaminate other plants, but the rot cannot take hold unless there is adequate moisture. Spores are not only , but are also carried by insects and other arthropods in the soil.

A plant with root rot will not normally survive, but can often be propagated so it will not be lost completely. Plants with root rot should be removed and destroyed.

Root rot can occur in hydroponic applications, if the water is not properly aerated. This is usually accomplished by use of an air pump, air stones, air diffusers and by adjustment of the frequency and length of watering cycles where applicable. Hydroponic air pumps function in much the same way as aquarium pumps, which are used for the same purpose. Root rot and other problems associated with poor water aeration were principal reasons for the development of aeroponics.

Digital dermatitis is a polymicrobial disease involving treponemes and other anaerobes. Treponemes are the bacterium most commonly found in lesions. Their abundance increases as the lesion progresses. They account for 94% of bacterial sequences detected in chronic lesions.