Any intense exposure to UV light can lead to photokeratitis. Common causes include welders who have failed to use adequate eye protection such as an appropriate welding helmet or welding goggles. This is termed "arc eye", while photokeratitis caused by exposure to sunlight reflected from ice and snow, particularly at elevation, is commonly called "snow blindness". It can also occur due to using tanning beds without proper eyewear. Natural sources include bright sunlight reflected from snow or ice or, less commonly, from sea or sand. Fresh snow reflects about 80% of the UV radiation compared to a dry, sandy beach (15%) or sea foam (25%). This is especially a problem in polar regions and at high altitudes, as with every thousand feet (approximately 305 meters) of elevation (above sea level), the intensity of UV rays increases by four percent.

Photokeratitis can be prevented by using sunglasses or eye protection that transmits 5–10% of visible light and absorbs almost all UV rays. Additionally, these glasses should have large lenses and side shields to avoid incidental light exposure. Sunglasses should always be worn, even when the sky is overcast, as UV rays can pass through clouds.

The Inuit, Yupik, and other Arctic peoples carved snow goggles from materials such as driftwood or caribou antlers to help prevent snow blindness. Curved to fit the user's face with a large groove cut in the back to allow for the nose, the goggles allowed in a small amount of light through a long thin slit cut along their length. The goggles were held to the head by a cord made of caribou sinew.

In the event of missing sunglass lenses, emergency lenses can be made by cutting slits in dark fabric or tape folded back onto itself. The "SAS Survival Guide" recommends blackening the skin underneath the eyes with charcoal (as the ancient Egyptians did) to avoid any further reflection.