Growth of the bacteria is possible between 32–90 °F, with the most ideal conditions between 70–80 °F. Post-harvest storage and transportation is difficult for tropical and other warm environments when the air is not properly ventilated during these processes. Higher temperatures and high humidity are ideal growing conditions for the bacteria making ventilation a big priority when trying to combat this disease.

Laminated root rot also known as yellow ring rot is caused by the fungal pathogen "Phellinus weirii". Laminated root rot is one of the most damaging root disease amongst conifers in northwestern America and true firs, Douglas-fir, Mountain hemlock, and Western hemlock are highly susceptible to infection with "P. weirii". A few species of plants such as Western white pine and Lodgepole pine are tolerant to the pathogen while Ponderosa pine is resistant to it. Only hardwoods are known to be immune to the pathogen.

Cladosporium fulvum is an Ascomycete called "Passalora fulva", a non-obligate pathogen that causes the disease on tomato known as the Tomato leaf mold. P. fulva only attacks tomato plants, especially the foliage, and it is a common disease in the greenhouses, but can also occur in the field. The pathogen is likely to grow in humid and cool conditions. In the greenhouses, this disease causes big problems during the fall, in the early winter and spring, due to the high relative humidity of air and the temperature, that are propitious for the leaf mold development. This disease was first described in the North Carolina, by Mordecai Cubitt Cooke (1883), on cultivated tomato (Cooke 1883), although it is original from South and Central America. The causal fungus of tomato leaf mold may also be referred as Cladosporium fulvum (Cooke 1883), a former name.

Bacterial soft rots are caused by several types of bacteria, but most commonly by species of gram-negative bacteria, "Erwinia", "Pectobacterium", and "Pseudomonas". It is a destructive disease of fruits, vegetables, and ornamentals found worldwide, and effects genera from nearly all the plant families. The bacteria mainly attack the fleshy storage organs of their hosts (tubers, corms, bulbs, and rhizomes), but they also affect succulent buds, stems, and petiole tissues. With the aid of special enzymes, the plant is turned into a liquidy mush in order for the bacteria to consume the plant cell's nutrients. Disease spread can be caused by simple physical interaction between infected and healthy tissues during storage or transit. The disease can also be spread by insects. Control of the disease is not always very effective, but sanitary practices in production, storing, and processing are something that can be done in order to slow the spread of the disease and protect yields.

Peach scab, also known as peach freckles, is a disease of stone fruits caused by the fungi "Cladosporium carpophilum". The disease is most prevalent in wet and warm areas especially southern part of the U.S. as the fungi require rain and wind for dispersal. The fungus causes scabbing, lesions, and defoliating on twig, fruit, and leaf resulting in downgrade of peach quality or loss of fruits due to rotting in severe cases.

Armillaria root rot is a fungal root rot caused by several different members of the genus "Armillaria". The symptoms are variable depending on the host infected, ranging from stunted leaves to chlorotic needles and dieback of twigs and branches. However, all infected hosts display symptoms characteristic of being infected by a white rotting fungus. The most effective ways of management focus on limiting the spread of the fungus, planting resistant species, and removing infected material. This disease poses a threat to the lumber industry as well as affecting recreational areas.

Root rot is a condition found in both indoor and outdoor plants, although more common in indoor plants with poor drainage. As the name states, the roots of the plant rot. Usually, this is a result of overwatering. In houseplants, it is a very common problem, and is slightly less common in outdoor plants. In both indoor and outdoor plants, it is usually lethal and there is no effective treatment.

The excess water makes it very difficult for the roots to get the air that they need, causing them to decay. To avoid root rot, it is best to only water plants when the soil becomes dry, and to put the plant in a well-drained pot. Using a heavy soil, such as one dug up from outdoors can also cause root rot.

Many cases of root rot are caused by members of the water mould genus "Phytophthora"; perhaps the most aggressive is "P. cinnamomi". Spores from root rot causing agents do contaminate other plants, but the rot cannot take hold unless there is adequate moisture. Spores are not only , but are also carried by insects and other arthropods in the soil.

A plant with root rot will not normally survive, but can often be propagated so it will not be lost completely. Plants with root rot should be removed and destroyed.

Ascochyta blights occur throughout the world and can be of significant economic importance. Three fungi contribute to the ascochyta blight disease complex of pea ("Pisum sativum"). "Ascochyta pinodes" (sexual stage: "Mycosphaerella pinodes") causes Mycosphaerella blight. "Ascochyta pinodella" (synonym: "Phoma medicaginis" var. "pinodella") causes Ascochyta foot rot, and "Ascochyta pisi" causes Ascochyta blight and pod spot. Of the three fungi, "Ascochyta pinodes" is of the most importance. These diseases are conducive under wet and humid conditions and can cause a yield loss of up to fifty percent if left uncontrolled. The best method to control ascochyta blights of pea is to reduce the amount of primary inoculum through sanitation, crop-rotation, and altering the sowing date. Other methods—chemical control, biological control, and development of resistant varieties—may also be used to effectively control ascochyta diseases.

Common spot of strawberry is one of the most common and widespread diseases of strawberry. Common spot of strawberry is caused by the fungus Mycosphaerella fragariae (imperfect stage is "Ramularia tulasnei"). Symptoms of this disease first appear as circular, dark purple spots on the leaf surface. "Mycosphaerella fragariae" is very host specific and only infects strawberry.

Mycosphaerella fragariae is a species from family Mycosphaerellaceae.

Dead arm, sometimes grape canker, is a disease of grapes caused by a deep-seated wood rot of the arms or trunk of the grapevine. As the disease progresses over several years, one or more arms may die, hence the name "dead arm". Eventually the whole vine will die. In the 1970s, dead-arm was identified as really being two diseases, caused by two different fungi, "Eutypa lata" and "Phomopsis viticola" (syn. "Cryptosporella viticola").

This disease is hard to control because plants can carry the pathogen prior to showing any symptoms. It is important to be aware of where new plants are being planted so that they aren't exposed to disease.

The most effective method to avoid disease is to plant resistant cultivars that are specific to the location of planting. Some examples of resistant cultivars include Allstar, Cardinal, Delite, Honeoye, Jewel and Tennessee Beauty. Examples of susceptible cultivars that should be avoided include Sparkle, Sunrise, Raritan and Catskill.

Amongst the many different management strategies, cultural control practices play a significant role in prevention or reduction of disease. Some common cultural practices that have been used are as follows. In order to have more successful yields, strawberry plants should be planted in well-drained soil, in an area exposed to lots of available sunlight and air circulation. Presence of weeds may reduce air circulation for strawberry plants and create a shaded, moist environment, which would make the plants more wet and susceptible to disease. Therefore, weed growth needs to be prevented, either by chemical or cultural control methods. Immediately after harvest, any severely infected plants and plant debris should be raked, removed and burned completely to get rid of any remaining spores and reduce inoculum of the pathogen.

At the beginning of renovation, which occurs after harvest, one application of nitrogen fertilizers should be applied to help with canopy regrowth. About 4–6 weeks later, it is generally a good time to apply another application of nitrogen fertilization to the developing strawberry plants. This will allow for the plants to absorb nutrients provided by the fertilizer. However, applying too much nitrogen fertilizer throughout the spring, may result in an abundance of young foliage tissues that could be susceptible to disease.

Fungicides are not necessarily required, however if the strawberry grower decides to use fungicides, they should be applied during early in the spring and immediately after renovation. A fungicide spray schedule may also be put into place. It is recommended to spray in intervals of about 2 weeks. Examples of some recommended fungicides are Bulletin 506-B2, Midwest Commercial Small Fruit and Grape Spray Guide for commercial growers and Bulletin 780, Controlling Disease and Insects in Home Fruit Plantings for backyard home growers.

Root rot can occur in hydroponic applications, if the water is not properly aerated. This is usually accomplished by use of an air pump, air stones, air diffusers and by adjustment of the frequency and length of watering cycles where applicable. Hydroponic air pumps function in much the same way as aquarium pumps, which are used for the same purpose. Root rot and other problems associated with poor water aeration were principal reasons for the development of aeroponics.

Sudden Death Syndrome (SDS) in Soybean plants quickly spread across the southern United States in the 1970s, eventually reaching most agricultural areas of the US. SDS is caused by a Fusarium fungi, more specifically the soil borne root pathogen "Fusarium virguliforme," formerly known as "Fusarium solani" f. sp. "glycines"."." Losses could exceed hundreds of millions of dollars in US soybean markets alone making it one of the most important diseases found in Soybeans across the US

Beet vascular necrosis and rot is a soft rot disease caused by the bacterium Pectobacterium carotovorum" subsp. "betavasculorum, which has also been known as "Pectobacterium betavasculorum" and "Erwinia carotovora" subsp. "betavasculorum". It was classified in the genus "Erwinia" until genetic evidence suggested that it belongs to its own group; however, the name Erwinia is still in use. As such, the disease is sometimes called Erwinia rot today. It is a very destructive disease that has been reported across the United States as well as in Egypt. Symptoms include wilting and black streaks on the leaves and petioles. It is usually not fatal to the plant, but in severe cases the beets will become hollowed and unmarketable. The bacteria is a generalist species which rots beets and other plants by secreting digestive enzymes that break down the cell wall and parenchyma tissues. The bacteria thrive in warm and wet conditions, but cannot survive long in fallow soil. However, it is able to persist for long periods of time in the rhizosphere of weeds and non-host crops. While it is difficult to eradicate, there are cultural practices that can be used to control the spread of the disease, such as avoiding injury to the plants and reducing or eliminating application of nitrogen fertilizer.

Dead arm is a disease that causes symptoms in the common grapevine species, "vitis vinifera", in many regions of the world. This disease is mainly caused by the fungal pathogen, "Phomopsis viticola", and is known to affect many cultivars of table grapes, such as Thompson Seedless, Red Globe, and Flame Seedless. Early in the growing season, the disease can delay the growth of the plant and cause leaves to turn yellow and curl. Small, brown spots on the shoots and leaf veins are very common first symptoms of this disease. Soil moisture and temperature can impact the severity of symptoms, leading to a systemic infection in warm, wet conditions. As the name of this disease suggests, it also causes one or more arms of the grapevine to die, often leading to death of the entire vine.

In all cases of the disease, thorough study of the distribution and intensity should be determined to help choose a management practice that’s cost effective. For example, if the disease is widespread in a pre-commercial stand, destroying the plantation may be the most effective measure. The area can then be replanted with immune or low-susceptible species. Aerial surveying is a viable tool available for use in areas where there are severely damaged systems. Other management tools include:

- Using up to date models to help predict the spread of the disease can help with management choice

- Susceptible species should not be planted within 100 feet of a disease center

- Remove as many infected roots and stumps as possible to avoid inoculation of healthy plants

- Cut all infected trees within the disease center and all uninfected trees within 50 ft of the disease center

- Stumping is an expensive, yet effective measure in gently sloping, high-quality sites with light soils. After an excavator removes the stump, pieces of the root are torn and fragmented so invading soil organisms deter long-term inocula.

- Push-falling is an alternative to post-harvest stumping. Whole trees are pushed over with machinery to expose diseased roots for removal. Push-falling is effective in areas with slopes less than 30 percent and soil textures that are sandy to sandy loam.

- Applications of chemical fumigation (such as chloropicrin) have been unsuccessful in dealing with Laminated root rot.

Plant varieties that are resistant to "Armillaria" or species are resistant to other environmental or biological stressors. If the infected area has been cleared of trees, plants that are not vulnerable to the disease should be planted for five or so years until "Armillaria" is eradicated. Stump removal is also an effective management tool but can be expensive. Another way to reduce susceptibility is to maintain plant health by regular fertilization (if needed), watering during droughts, and trying not to create wounds on the plant. Fumigation can also be used to reduce the amount of inoculum.

Panama disease is a plant disease of the roots of banana plants. It is a type of Fusarium wilt, caused by the fungal pathogen "Fusarium oxysporum f. sp. cubense" (Foc). The pathogen is resistant to fungicide and cannot be controlled chemically.

During the 1950s, Panama disease wiped out most commercial Gros Michel banana production. The Gros Michel banana was the dominant cultivar of bananas, and the blight inflicted enormous costs and forced producers to switch to other, disease-resistant cultivars. New strains of Panama disease currently threaten the production of today's most popular cultivar, Cavendish.

The first strategy of management is the cultural practices for reducing the disease. It includes adequating row and plant spacing that promote better air circulation through the canopy reducing the humidity; preventing excessive nitrogen on fertilization since nitrogen out of balance enhances foliage disease development; keeping the relatively humidity below 85% (suitable on greenhouse), promote air circulation inside the greenhouse, early planting might to reduce the disease severity and seed treatment with hot water (25 minutes at 122 °F or 50 °C).

Some herbaceous hosts naturally have the Cherry X Disease. Once the spreads to the cherry hosts, with the help of the mountain leafhoppers, the cherry leafhoppers can spread the disease around to other woody hosts. Here are some approaches at management with each host type:

Due to the effectiveness of fungicide application and it’s relatively minor damage to crops, there are few cultural controls and no resistant peach variants that have been developed for the current market. For prevention of peach scab, proper pruning of leaves to allow adequate sunlight will drastically reduce the risk of infection and propagation. The primary form of regulation for peach scab requires frequent applications of commercial fungicides. There are three main types of fungicides that are effective against peach scab: captan, chlorothalonil, and demethylation inhibitors. Proper use of chlorothalonil requires application starting from shuck split and reapplication every two weeks. Increased temperature and wet weather will necessitate more frequent applications. Applications are necessary until 4–6 weeks until harvest.

There are numerous steps one has to take to try to manage the disease as best as possible. The aim is at prevention because once the pathogen reaches the cherry trees, disease will surely ensue and there is no cure or remedy to prevent the loss of fruit production as well as the ultimate death of the tree.

The best way to manage SDS is with a resistant variety. One issue is that most resistant varieties are only partially resistant so yield reductions may still occur. Another issue is that the plant needs resistance for SDS and SCN in order to gain true resistance because of their synergistic relationship and most varieties do not have resistance for both. Aside from resistance, the only other ways to control SDS are management practices.

These include:

- Avoid planting in cool, wet conditions

- Plant later when the soil has warmed up

- Try avoiding soil compaction as it creates wet spots in the soil that can increase plant stress and SDS infection rates

- Managing for SCN as this nematode often occurs alongside "F. virguliforme"

- Deep tillage to break up compaction and help the soil warm faster

One common management tactic used in other pathogen management plans is crop rotation. In some cases, disease severity can be reduced but most often it is not effective. This is because of chlamydospores and macroconidia as they can persist in soils for many years.

Fungicides are another common product used to control fungal pathogens. In-furrow applications and seed treatments with fungicides have some effect in decreasing disease instance but in most cases, the timing isn't right and the pathogen can still infect the plants. Foliar applications of fungicides have no effect on disease suppression for SDS because the fungi are found in the soil and mainly the roots of the plants. Most foliar fungicides do not move downward through plants, therefore having no effect on the pathogen.

In order to prevent rainscald, it is important to stop the spread of the bacteria. Tick and insect control is an effective way to stop the spread of the bacteria from one animal to another. As well, separating infected animals will help to stop the spread of the bacteria. Keeping the animal in a dry, well-ventilated area out of the rain and wet conditions will stop the bacteria from growing. This dry environment includes dry ground as well as dry air.

The bacteria can survive in the rhizosphere of other crops such as tomato, carrots, sweet potato, radish, and squash as well as weed plants like lupin and pigweed, so it is very hard to get rid of it completely. When it is known that the bacterium is present in the soil, planting resistant varieties can be the best defense against the disease. Many available beet cultivars are resistant to "Pectobacterium carotovorum" subsp. "betavasculorum", and some examples are provided in the corresponding table. A comprehensive list is maintained by the USDA on the Germplasm Resources Information Network.

Even though some genes associated with root defense response have been identified, the specific mechanism of resistance is unknown, and it is currently being researched.