Treatment of corns include paring of the lesions, which immediately reduces pain. Another popular method is to use a corn plaster, a felt ring with a core of salicylic acid that relieves pressure and erodes the hard skin. However, if an abnormal pressure source remains, the corn generally returns. If the source of any abnormal pressure is detected, this may be avoided, usually through a change to more comfortable footwear or with various types of shoe inserts or footwear with extra toe space. In extreme cases correcting gait abnormalities may be required. If no other treatment is effective, surgery may be performed.

Corns and calluses are easier to prevent than to treat. When it is usually not desirable to form a callus, minimizing rubbing and pressure will prevent callus formation. Footwear should be properly fitted, gloves may be worn, and protective pads, rings or skin dressings may be used. People with poor circulation or sensation should check their skin often for signs of rubbing and irritation so they can minimize any damage.

Calluses and corns may go away by themselves eventually, once the irritation is consistently avoided. They may also be dissolved with keratolytic agents containing salicylic acid, sanded down with a pumice stone or silicon carbide sandpaper or filed down with a callus shaver, or pared down by a professional such as a podiatrist or a foot health practitioner.

There are very few things that can be done to control the spread of bacterial soft rots, and the most effective of them have to do with simply keeping sanitary growing practices.

Storage warehouses should be removed of all plant debris, and the walls and floors disinfected with either formaldehyde or copper sulfate between harvests. Injury to plant tissues should be avoided as much as possible, and the humidity and temperature of the storage facility should be kept low using an adequate ventilation system. These procedures have proven themselves to be very effective in the control of storage soft rot of potato in Wisconsin.

It also helps if plants are planted in well-drained soils, at intervals appropriate for adequate ventilation between plants. Few varieties are resistant to the disease and none are immune, so rotating susceptible plants with non-susceptible ones like cereals is a practice positive to limiting soft rot infection.

The control of specific insect vectors is also a good way of controlling disease spread in the field and in storage. Soil and foliage insecticide treatment helps controls the bugs that frequently cause wounds and disseminate the bacteria.

The most proficient and economical method to reduce yield losses from corn grey leaf spot is by introducing resistant plant varieties. In places where leaf spot occur, these crops can ultimately grow and still be resistant to the disease. Although the disease is not completely eliminated and resistant varieties show disease symptoms, at the end of the growing season, the disease is not as effective in reducing crop yield. SC 407 have been proven to be common corn variety that are resistant to grey leaf spot. If grey leaf spot infection is high, this variety may require fungicide application to achieve full potential. Susceptible varieties should not be planted in previously infected areas (see high risk table).

In persistent or especially bad rashes, an antifungal cream often has to be used. In cases that the rash is more of an irritation, a "mild" topical corticosteroid preparation, e.g. hydrocortisone cream, is used. As it is often difficult to tell a fungal infection apart from a mere skin irritation, many physicians prefer an corticosteroid-and-antifungal combination cream such as hydrocortisone/miconazole.

Burying the debris under the last year’s crop will help in reducing the presence of "Cercospera zeae-maydis", as the fungal-infected debris can only survive above the soil surface. Again this technique will aid in reducing the primary inoculum, but it will not completely eradicate the disease.

Various moisture-absorbing powders, such as talcum or starch, reduce moisture but may introduce other complications. Airborne powders of any sort can irritate lung tissue, and powders made from starchy plants (corn, arrowroot) provide food for fungi and are not recommended by the American Academy of Dermatology.

Boric acid (16.5%boron), borax (11.3% boron) or SoluBor (20.5% boron) can be applied to soils to correct boron deficiency. Typical applications of actual boron are about 1.1 kg/hectare or 1.0 lb/acre but optimum levels of boron vary with plant type. Borax, Boric Acid or Solubor can be dissolved in water and sprayed or applied to soil as a dust. Excess boron is toxic to plants so care must be taken to ensure correct application rate and even coverage. Leaves of many plants are damaged by boron; therefore, when in doubt, only apply to soil. Application of boron may not correct boron deficiency in alkaline soils because even with the addition of boron, it may remain unavailable for plant absorption. Continued application of boron may be necessary in soils that are susceptible to leaching such as sandy soils. Flushing soils containing toxic levels of boron with water can remove the boron through leaching.

The bacteria can survive in the rhizosphere of other crops such as tomato, carrots, sweet potato, radish, and squash as well as weed plants like lupin and pigweed, so it is very hard to get rid of it completely. When it is known that the bacterium is present in the soil, planting resistant varieties can be the best defense against the disease. Many available beet cultivars are resistant to "Pectobacterium carotovorum" subsp. "betavasculorum", and some examples are provided in the corresponding table. A comprehensive list is maintained by the USDA on the Germplasm Resources Information Network.

Even though some genes associated with root defense response have been identified, the specific mechanism of resistance is unknown, and it is currently being researched.

Sugarcane smut or "Ustilago scitaminea Sydow" is caused by the fungus "Sporisorium scitamineum"; smut was previously known as "Ustilago scitaminea". The smut 'whip' is a curved black structure which emerges from the leaf whorl, and which aids in the spreading of the disease. Sugarcane smut causes significant losses to the economic value of a sugarcane crop. Sugarcane smut has recently been found in the eastern seaboard areas of Australia, one of the world's highest-yielding sugar areas.

For the sugarcane crop to be infected by the disease, large spore concentrations are needed. The fungi uses its "smut-whip" to ensure that the disease is spread to other plants, which usually occurs over a time period of three months. As the inoculum is spread, the younger sugarcane buds just coming out of the soil will be the most susceptible. Because water is necessary for spore germination, irrigation has been shown to be a factor in spreading the disease. Therefore, special precautions need to be taken during irrigation to prevent spreading of the smut.

Another way to prevent the disease from occurring in the sugarcane is to use fungicide. This can be done by either pre-plant soaking or post-plant spraying with the specific fungicide. Pre-plant soaking has been proven to give the best results in preventing the disease, but post-plant spraying is a practical option for large sugarcane cultivations.

A corn (or clavus, plural clavi or clavuses) is a distinctively shaped callus of dead skin that usually occurs on thin or glabrous (hairless and smooth) skin surfaces, especially on the dorsal surface of toes or fingers. They can sometimes occur on the thicker skin of the palms or bottom of the feet.

Corns form when the pressure point against the skin traces an elliptical or semi-elliptical path during the rubbing motion, the center of which is at the point of pressure, gradually widening. If there is constant stimulation of the tissue producing the corns, even after the corn is surgically removed, the skin may continue to grow as a corn.

Magnesium supplements are used to prevent the disease when ruminants, for obvious economic reasons, must have access to dangerous pastures.

The affected animal should be left in the pasture, and not forced to come back to stall because excitation can darken the prognosis, even after adequate treatment.

Intravenous mixed calcium and magnesium injection are used. Subcutaneous injection of magnesium sulfate (200 ml of 50% solution) is also recommended.

Some bacteriophages, viruses that infect bacteria, have been used as effective controls of bacterial diseases in laboratory experiments. This relatively new technology is a promising control method that is currently being researched. Bacteriophages are extremely host-specific, which makes them environmentally sound as they will not destroy other, beneficial soil microorganisms. Some bacteriophages identified as effective controls of "Pectobacterium carotovorum" subsp. "betavasculorum" are the strains ΦEcc2 ΦEcc3 ΦEcc9 ΦEcc14. When mixed with a fertilizer and applied to inoculated calla lily bulbs in a greenhouse, they reduced diseased tissue by 40 to 70%. ΦEcc3 appeared to be the most effective, reducing the percent of diseased plants from 30 to 5% in one trial, to 50 to 15% in a second trial. They have also been used successfully to reduce rotting in lettuce caused by "Pectobacterium carotovorum" subsp. "carotovorum", a different bacterial species closely related to the one that causes beet vascular necrosis.

While it is more difficult to apply bacteriophages in a field setting, it is not impossible, and laboratory and greenhouse trials are showing bacteriophages to potentially be a very effective control mechanism. However, there are a few obstacles to surmount before field trials can begin. A large problem is that they are damaged by UV light, so applying the phage mixture during the evening will help promote its viability. Also, providing the phages with susceptible non-pathogenic bacteria to replicate with can ensure there is adequate persistence until the bacteriophages can spread to the targeted bacteria. The bacteriophages are unable to kill all the bacteria, because they need a dense population of bacteria in order to effectively infect and spread, so while the phages were able to decrease the number of diseased plants by up to 35%, around 2,000 Colony Forming Units per milliliter (an estimate of living bacteria cells) were able to survive the treatment. Lastly, the use of these bacteriophages places strong selection on the host bacteria, which causes a high probability of developing resistance to the attacking bacteriophage. Thus it is recommended that multiple strains of the bacteriophage be used in each application so the bacteria do not have a chance to develop resistance to any one strain.

The cat must have a supply of niacin, as cats cannot convert tryptophan into niacin like dogs. However, diets high in corn and low in protein can result in skin lesions and scaly, dry, greasy skin, with hair loss. Another B vitamin, biotin, if deficient causes hair loss around the eyes and face. A lack of B vitamins can be corrected by supplementing with a vitamin B complex, and brewers yeast.

Once boron has been absorbed by the plant and incorporated into the various structures that require boron, it is unable to disassemble these structures and re-transport boron through the plant resulting in boron being a non-mobile nutrient. Due to translocation difficulties the youngest leaves often show deficiency symptoms first.

Cats cannot synthesize vitamin A from plant beta-carotene, and therefore must be supplemented with retinol from meat. A deficiency in vitamin A will result in a poor coat, with hair loss, with scaly and thickened skin. However an excess of vitamin A, called hypervitaminosis A, can result from over feeding cod liver oil, and large amounts of liver. Signs of hypervitaminosis A are overly sensitive skin, and neck pain causing the cat to be unwilling to groom its self, resulting in a poor coat. Supplementing vitamin A with retinol to a deficient cat, and feeding a balanced diet to a cat with hypervitaminosis A will treat the underlying nutritional disorder.

Growth of the bacteria is possible between 32–90 °F, with the most ideal conditions between 70–80 °F. Post-harvest storage and transportation is difficult for tropical and other warm environments when the air is not properly ventilated during these processes. Higher temperatures and high humidity are ideal growing conditions for the bacteria making ventilation a big priority when trying to combat this disease.

Physiological plant disorders are caused by non-pathological conditions such as poor light, adverse weather, water-logging, phytotoxic compounds or a lack of nutrients, and affect the functioning of the plant system. Physiological disorders are distinguished from plant diseases caused by pathogens, such as a virus or fungus. While the symptoms of physiological disorders may appear disease-like, they can usually be prevented by altering environmental conditions. However, once a plant shows symptoms of a physiological disorder it is likely that that season’s growth or yield will be reduced.

The smuts are multicellular fungi characterized by their large numbers of teliospores. The smuts get their name from a Germanic word for dirt because of their dark, thick-walled, and dust-like teliospores. They are mostly Ustilaginomycetes (of the class Teliomycetae, subphylum Basidiomycota) and can cause plant disease. The smuts are grouped with the other basidiomycetes because of their commonalities concerning sexual reproduction.

Smuts are cereal and crop pathogens that most notably affect members of the grass family ("Poaceae"). Economically important hosts include maize, barley, wheat, oats, sugarcane, and forage grasses. They eventually hijack the plants' reproductive systems, forming galls which darken and burst, releasing fungal teliospores which infect other plants nearby. Before infection can occur, the smuts need to undergo a successful mating to form dikaryotic hyphae (two haploid cells fuse to form a dikaryon).

The following measures are advisable for keeping the vulva and vagina healthy:

- Avoiding washing with soap, since soap disturbs the natural pH balance of the vagina. Some pH-balanced soaps exist, but their effects remain unclear. Other measures are seldom necessary or advisable. Two notable examples: so-called "feminine hygiene sprays" are unnecessary, may be generally harmful, and have been known to cause severe allergic reactions. Vaginal douching is generally not necessary and has been implicated in helping to cause bacterial vaginosis (BV) and candidiasis ("yeast infections").

- After using the toilet, wipe from the front toward the back to avoid introducing bacteria from the anal area into the vulva. Use non-perfumed, undyed toilet paper.

- Drink plenty of water and urinate frequently and as soon as possible when you feel the need, to help flush bacteria out of the urinary tract and avoid urinary tract infections. For the same reason, try to urinate before and after sex.

- Change out of a wet swimsuit or other wet clothes as soon as possible.

- Avoid fragrances, colours, and "deodorants" in products that contact the vulva/vagina: sanitary napkins, tampons, and toilet paper. Some women who are sensitive to these substances should also avoid bubble baths and some fabric detergents and softeners.

- Use a menstrual cup instead of sanitary pads or tampons. Menstrual cups are a new form of menstrual product that has recently been rapidly gaining in popularity as a greener, more cost-effective and healthier alternative to tampons and sanitary pads.

- Avoid wearing leather trousers, tight jeans, panties made of nylon or other synthetic fabrics, or pantyhose without an all-cotton crotch (not cotton covered by nylon - cut out the nylon panel if necessary).

- Anything which has been in contact with the anal area (see anal sex) should be thoroughly washed with soap and water or a disinfectant before coming in contact with the vulva or vagina.

- Use condoms during heterosexual intercourse, practise safer sex, know your sex partners, ask sex partners to practise basic hygiene of their genitals. Use artificial lubrication during the intercourse if the amount naturally produced is not enough.

- Be careful with objects inserted inside the vagina. Improper insertion of objects into any body opening can cause damage: infection, cutting, piercing, trauma, blood loss, etc.

- Avoid letting any contaminants inside the vagina, including dirt but especially sand.

- See your gynecologist regularly.

- Be careful while removing hair in this area.

Women who are unable to walk are more likely to have infections. The problem can be prevented according to above-mentioned and following measures:

- Wash crotch and rectal areas (with a soap-substitute if desired) and large amount of warm running water, every morning and evening. The disabled person can sit on a shower chair with an open seat or on a toilet. Use a shower head or water container to wash more directly.

- Use towel to dry.

- DO NOT use talcum/body powder, if desired use corn starch powder (corn-flour) on the skin of the genital area to absorb perspiration.

- Avoid sitting on plastic or synthetic materials for extended lengths of time.

- Wear loose underpants and change if soilage or wetness occurs.

Hairballs can occur in ferrets, but are not readily expelled by vomiting like the way cats deal with them. One or more hairballs in a ferret may lead to loss of appetite and subsequent weight loss. A hairball may enter the intestine and cause a life-threatening obstruction. Ferrets typically replace their coats twice a year, and at that time require brushing to remove loose hairs before they can be ingested, and possibly administration of a hairball remedy as a preventive. Artificial lighting or administration of certain medications may alter the normal spring and fall seasonal coat changes in the ferret.

Recommended strategies to prevent mold include: avoiding mold-contamination; utilization of environmental controls; the use of personal protective equipment (PPE) including skin and eye protection and respiratory protection; and environmental controls such as ventilation and suppression of dust. When mold cannot be prevented, the CDC recommends clean-up protocol including first taking emergency action to stop water intrusion. Second, they recommend determining the extent of water damage and mold contamination. And third, they recommend planning remediation activities such as establishing containment and protection for workers and occupants; eliminating water or moisture sources if possible; decontaminating or removing damaged materials and drying any wet materials; evaluating whether the space has been successfully remediated; and reassembling the space to control sources of moisture.

Poor growth and a variety of disorders such as leaf discolouration (chlorosis) can be caused by a shortage of one or more plant nutrients. Poor plant uptake of a nutrient from the soil (or other growing medium) may be due to an absolute shortage of that element in the growing medium, or because that element is present in a form that is not available to the plant. The latter can be caused by incorrect pH, shortage of water, poor root growth or an excess of another nutrient. Plant nutrient deficiencies can be avoided or corrected using a variety of approaches including the consultation of experts on-site, the use of soil and plant-tissue testing services, the application of prescription-blend fertilizers, the application of fresh or well-decomposed organic matter, and the use of biological systems such as cover crops, intercropping, improved fallows, ley cropping, permaculture, or crop rotation.

Nutrient (or mineral) deficiencies include:

- Boron deficiency

- Calcium deficiency

- Iron deficiency

- Magnesium deficiency

- Manganese deficiency

- Molybdenum deficiency

- Nitrogen deficiency

- Phosphorus deficiency

- Potassium deficiency

- Zinc deficiency