There are very few things that can be done to control the spread of bacterial soft rots, and the most effective of them have to do with simply keeping sanitary growing practices.

Storage warehouses should be removed of all plant debris, and the walls and floors disinfected with either formaldehyde or copper sulfate between harvests. Injury to plant tissues should be avoided as much as possible, and the humidity and temperature of the storage facility should be kept low using an adequate ventilation system. These procedures have proven themselves to be very effective in the control of storage soft rot of potato in Wisconsin.

It also helps if plants are planted in well-drained soils, at intervals appropriate for adequate ventilation between plants. Few varieties are resistant to the disease and none are immune, so rotating susceptible plants with non-susceptible ones like cereals is a practice positive to limiting soft rot infection.

The control of specific insect vectors is also a good way of controlling disease spread in the field and in storage. Soil and foliage insecticide treatment helps controls the bugs that frequently cause wounds and disseminate the bacteria.

Growth of the bacteria is possible between 32–90 °F, with the most ideal conditions between 70–80 °F. Post-harvest storage and transportation is difficult for tropical and other warm environments when the air is not properly ventilated during these processes. Higher temperatures and high humidity are ideal growing conditions for the bacteria making ventilation a big priority when trying to combat this disease.

The bacteria can survive in the rhizosphere of other crops such as tomato, carrots, sweet potato, radish, and squash as well as weed plants like lupin and pigweed, so it is very hard to get rid of it completely. When it is known that the bacterium is present in the soil, planting resistant varieties can be the best defense against the disease. Many available beet cultivars are resistant to "Pectobacterium carotovorum" subsp. "betavasculorum", and some examples are provided in the corresponding table. A comprehensive list is maintained by the USDA on the Germplasm Resources Information Network.

Even though some genes associated with root defense response have been identified, the specific mechanism of resistance is unknown, and it is currently being researched.

The best way to manage SDS is with a resistant variety. One issue is that most resistant varieties are only partially resistant so yield reductions may still occur. Another issue is that the plant needs resistance for SDS and SCN in order to gain true resistance because of their synergistic relationship and most varieties do not have resistance for both. Aside from resistance, the only other ways to control SDS are management practices.

These include:

- Avoid planting in cool, wet conditions

- Plant later when the soil has warmed up

- Try avoiding soil compaction as it creates wet spots in the soil that can increase plant stress and SDS infection rates

- Managing for SCN as this nematode often occurs alongside "F. virguliforme"

- Deep tillage to break up compaction and help the soil warm faster

One common management tactic used in other pathogen management plans is crop rotation. In some cases, disease severity can be reduced but most often it is not effective. This is because of chlamydospores and macroconidia as they can persist in soils for many years.

Fungicides are another common product used to control fungal pathogens. In-furrow applications and seed treatments with fungicides have some effect in decreasing disease instance but in most cases, the timing isn't right and the pathogen can still infect the plants. Foliar applications of fungicides have no effect on disease suppression for SDS because the fungi are found in the soil and mainly the roots of the plants. Most foliar fungicides do not move downward through plants, therefore having no effect on the pathogen.

Plant varieties that are resistant to "Armillaria" or species are resistant to other environmental or biological stressors. If the infected area has been cleared of trees, plants that are not vulnerable to the disease should be planted for five or so years until "Armillaria" is eradicated. Stump removal is also an effective management tool but can be expensive. Another way to reduce susceptibility is to maintain plant health by regular fertilization (if needed), watering during droughts, and trying not to create wounds on the plant. Fumigation can also be used to reduce the amount of inoculum.

In all cases of the disease, thorough study of the distribution and intensity should be determined to help choose a management practice that’s cost effective. For example, if the disease is widespread in a pre-commercial stand, destroying the plantation may be the most effective measure. The area can then be replanted with immune or low-susceptible species. Aerial surveying is a viable tool available for use in areas where there are severely damaged systems. Other management tools include:

- Using up to date models to help predict the spread of the disease can help with management choice

- Susceptible species should not be planted within 100 feet of a disease center

- Remove as many infected roots and stumps as possible to avoid inoculation of healthy plants

- Cut all infected trees within the disease center and all uninfected trees within 50 ft of the disease center

- Stumping is an expensive, yet effective measure in gently sloping, high-quality sites with light soils. After an excavator removes the stump, pieces of the root are torn and fragmented so invading soil organisms deter long-term inocula.

- Push-falling is an alternative to post-harvest stumping. Whole trees are pushed over with machinery to expose diseased roots for removal. Push-falling is effective in areas with slopes less than 30 percent and soil textures that are sandy to sandy loam.

- Applications of chemical fumigation (such as chloropicrin) have been unsuccessful in dealing with Laminated root rot.

In order to prevent rainscald, it is important to stop the spread of the bacteria. Tick and insect control is an effective way to stop the spread of the bacteria from one animal to another. As well, separating infected animals will help to stop the spread of the bacteria. Keeping the animal in a dry, well-ventilated area out of the rain and wet conditions will stop the bacteria from growing. This dry environment includes dry ground as well as dry air.

Some bacteriophages, viruses that infect bacteria, have been used as effective controls of bacterial diseases in laboratory experiments. This relatively new technology is a promising control method that is currently being researched. Bacteriophages are extremely host-specific, which makes them environmentally sound as they will not destroy other, beneficial soil microorganisms. Some bacteriophages identified as effective controls of "Pectobacterium carotovorum" subsp. "betavasculorum" are the strains ΦEcc2 ΦEcc3 ΦEcc9 ΦEcc14. When mixed with a fertilizer and applied to inoculated calla lily bulbs in a greenhouse, they reduced diseased tissue by 40 to 70%. ΦEcc3 appeared to be the most effective, reducing the percent of diseased plants from 30 to 5% in one trial, to 50 to 15% in a second trial. They have also been used successfully to reduce rotting in lettuce caused by "Pectobacterium carotovorum" subsp. "carotovorum", a different bacterial species closely related to the one that causes beet vascular necrosis.

While it is more difficult to apply bacteriophages in a field setting, it is not impossible, and laboratory and greenhouse trials are showing bacteriophages to potentially be a very effective control mechanism. However, there are a few obstacles to surmount before field trials can begin. A large problem is that they are damaged by UV light, so applying the phage mixture during the evening will help promote its viability. Also, providing the phages with susceptible non-pathogenic bacteria to replicate with can ensure there is adequate persistence until the bacteriophages can spread to the targeted bacteria. The bacteriophages are unable to kill all the bacteria, because they need a dense population of bacteria in order to effectively infect and spread, so while the phages were able to decrease the number of diseased plants by up to 35%, around 2,000 Colony Forming Units per milliliter (an estimate of living bacteria cells) were able to survive the treatment. Lastly, the use of these bacteriophages places strong selection on the host bacteria, which causes a high probability of developing resistance to the attacking bacteriophage. Thus it is recommended that multiple strains of the bacteriophage be used in each application so the bacteria do not have a chance to develop resistance to any one strain.

Disease cures are almost always more expensive and less effective than simple prevention measures. Often precautions involve maintaining a stable aquarium that is adjusted for the specific species of fish that are kept and not over-crowding a tank or over-feeding the fish. Common preventive strategies include avoiding the introduction of infected fish, invertebrates or plants by quarantining new additions before adding them to an established tank, and discarding water from external sources rather than mixing it with clean water. Similarly, foods for herbivorous fish such as lettuce or cucumbers should be washed before being placed in the tank. Containers that do not have water filters or pumps to circulate water can also increase stress to fish. Other stresses on fish and tanks can include certain chemicals, soaps and detergents, and impacts to tank walls causing shock waves that can damage fish.

Rainscald normally heals on its own, however as the condition can spread to involve large areas, prompt treatment is recommended. Although some cases can be severe, most rain scald is minor and can be easily and cheaply treated at home naturally.

First groom the affected parts carefully, to remove any loose hair. Be extremely gentle, the area is very sore itchy and horses will very quickly get fidgety. Next shampoo the area, use warm water and a soft cloth or brush, and massage the lather through the coat as much as the horse will tolerate. It is best to use Neem shampoo here, as this will treat as well as clean, but any mild shampoo is fine. Remove as much water as possible and dry the horse off, either use a hair drier or let him/her stand in the sun until completely dry. It is important not to let the horse roll! The rain scald bacteria may be picked up from the soil.

When the horse is completely dry, gently brush off any more loose hair. Next apply a salve or cream containing a high percentage of neem oil, or even pure neem oil, to liberally coat the affected area. Rub it in using fingertips, massage the area as much as the horse will tolerate. This will be very greasy. Smooth the hair back down and apply a rug to keep the horse dry, this prevents the neem being washed off as well as protecting from more dampness issues. Turn the horse out as normal.

Check it every day, and reapply the neem salve/cream if it seems to have dried away. The area should remain greasy with neem. Every 2–3 days or so, go through and scrape/pick off as much of the scabs as possible without upsetting the horse or making it bleed, then reapply the neem. Typically there will be improvement in a few days, and in a week there'll be some sign of new hair growing back. More severe rain scald may take longer.

Once all the scabs are gone and there is new hair fuzz growing in all over, use neem shampoo to clean the area of greasy residue, and dry well. Keep the horse covered for some time after rain scald has been treated, particularly in wet weather. Do not allow the skin to remain damp. It is advisable to shampoo the horse after riding or exercising, to remove sweat, which may encourage rain scald conditions, and make sure the coat is completely dry afterwards.

This treatment works in many ways. First, shampooing cleans the area of any contaminants, remove a lot of loose hair and scabs, and the rubbing stimulates the circulation. The neem is an antifungal agent, and works to eliminate the bacteria that cause the infection. It soothes the irritation in the area, and its greasiness provides the ideal environment for the raw skin to heal and grow new hair. It also helps to soften and lift the scabs. The new hair cannot grow in until those scabs are removed from the surface, but they are very painful to pick and remove, and most horses are intolerant of this procedure. After the neem has soaked into these scabs they will come away much more freely, and soon new hair will grow through.

In conventional treatment, scabs are softened with benzoyl peroxide and chlorhexidine and removed in order to speed the healing process. In severe or chronic cases, penicillin and streptomycin are injected into the horse to kill the bacteria.

Typically the disease is not life-threatening, nor does it impact the welfare of the horse, so treatments are more for the owner's sake of mind and cosmetic appeal of the animal.

Although the dead-arm disease is usually looked upon as a malignant disease that often cripples one or more vines, some wine estates have discovered that the arms that are still alive when dead-arm has struck yield a very flavorful wine. One such vineyard belonging to Australian wine producer d'Arenberg have marketed this "Dead Arm" Shiraz, which has received high wine ratings among various wine critics.

Root rot can occur in hydroponic applications, if the water is not properly aerated. This is usually accomplished by use of an air pump, air stones, air diffusers and by adjustment of the frequency and length of watering cycles where applicable. Hydroponic air pumps function in much the same way as aquarium pumps, which are used for the same purpose. Root rot and other problems associated with poor water aeration were principal reasons for the development of aeroponics.

In some cases the causes of an infection or disease will be obvious (such as fin rot), though in other cases it may be due to water conditions, requiring special testing equipment and chemicals to appropriately adjust the water. Isolating diseased fish can help prevent the spread of infection to healthy fish in the tank. This also allows the use of chemicals or drugs which may damage the nitrogen cycle, plants or chemical filtration of a properly-functioning tank. Other alternatives include short baths in a bucket that contains the treated water. Salt baths can be used as an antiseptic and fungicide, and will not damage beneficial bacteria, though ordinary table salt may contain additives which can harm fish. Alternatives include aquarium salt, Kosher salt or rock salt. Gradually raising the temperature of the tank may kill certain parasites, though some diseased fish may be harmed and certain species can not tolerate high temperatures. Aeration is necessary since less oxygen is dissolved in warm water.

There are a number of effective treatments for many stains of bacterial infections. Three of the most common are tetracycline, penicillin and naladixic acid. Salt baths are another effective treatment.

Quaternary ammonium compounds can be added to the water of infected adult fish and fry. Alternatively, the antibiotic oxytetracycline can be given to adults, fry and broodstock. To prevent the disease, it is necessary to ensure water is pathogen-free and that water hardening is completed effectively for eggs.

Root rot is a condition found in both indoor and outdoor plants, although more common in indoor plants with poor drainage. As the name states, the roots of the plant rot. Usually, this is a result of overwatering. In houseplants, it is a very common problem, and is slightly less common in outdoor plants. In both indoor and outdoor plants, it is usually lethal and there is no effective treatment.

The excess water makes it very difficult for the roots to get the air that they need, causing them to decay. To avoid root rot, it is best to only water plants when the soil becomes dry, and to put the plant in a well-drained pot. Using a heavy soil, such as one dug up from outdoors can also cause root rot.

Many cases of root rot are caused by members of the water mould genus "Phytophthora"; perhaps the most aggressive is "P. cinnamomi". Spores from root rot causing agents do contaminate other plants, but the rot cannot take hold unless there is adequate moisture. Spores are not only , but are also carried by insects and other arthropods in the soil.

A plant with root rot will not normally survive, but can often be propagated so it will not be lost completely. Plants with root rot should be removed and destroyed.

Laminated root rot also known as yellow ring rot is caused by the fungal pathogen "Phellinus weirii". Laminated root rot is one of the most damaging root disease amongst conifers in northwestern America and true firs, Douglas-fir, Mountain hemlock, and Western hemlock are highly susceptible to infection with "P. weirii". A few species of plants such as Western white pine and Lodgepole pine are tolerant to the pathogen while Ponderosa pine is resistant to it. Only hardwoods are known to be immune to the pathogen.

Armillaria root rot is a fungal root rot caused by several different members of the genus "Armillaria". The symptoms are variable depending on the host infected, ranging from stunted leaves to chlorotic needles and dieback of twigs and branches. However, all infected hosts display symptoms characteristic of being infected by a white rotting fungus. The most effective ways of management focus on limiting the spread of the fungus, planting resistant species, and removing infected material. This disease poses a threat to the lumber industry as well as affecting recreational areas.

Sudden Death Syndrome (SDS) in Soybean plants quickly spread across the southern United States in the 1970s, eventually reaching most agricultural areas of the US. SDS is caused by a Fusarium fungi, more specifically the soil borne root pathogen "Fusarium virguliforme," formerly known as "Fusarium solani" f. sp. "glycines"."." Losses could exceed hundreds of millions of dollars in US soybean markets alone making it one of the most important diseases found in Soybeans across the US

Dead arm, sometimes grape canker, is a disease of grapes caused by a deep-seated wood rot of the arms or trunk of the grapevine. As the disease progresses over several years, one or more arms may die, hence the name "dead arm". Eventually the whole vine will die. In the 1970s, dead-arm was identified as really being two diseases, caused by two different fungi, "Eutypa lata" and "Phomopsis viticola" (syn. "Cryptosporella viticola").

Ascochyta blights occur throughout the world and can be of significant economic importance. Three fungi contribute to the ascochyta blight disease complex of pea ("Pisum sativum"). "Ascochyta pinodes" (sexual stage: "Mycosphaerella pinodes") causes Mycosphaerella blight. "Ascochyta pinodella" (synonym: "Phoma medicaginis" var. "pinodella") causes Ascochyta foot rot, and "Ascochyta pisi" causes Ascochyta blight and pod spot. Of the three fungi, "Ascochyta pinodes" is of the most importance. These diseases are conducive under wet and humid conditions and can cause a yield loss of up to fifty percent if left uncontrolled. The best method to control ascochyta blights of pea is to reduce the amount of primary inoculum through sanitation, crop-rotation, and altering the sowing date. Other methods—chemical control, biological control, and development of resistant varieties—may also be used to effectively control ascochyta diseases.

Panama disease is a plant disease of the roots of banana plants. It is a type of Fusarium wilt, caused by the fungal pathogen "Fusarium oxysporum f. sp. cubense" (Foc). The pathogen is resistant to fungicide and cannot be controlled chemically.

During the 1950s, Panama disease wiped out most commercial Gros Michel banana production. The Gros Michel banana was the dominant cultivar of bananas, and the blight inflicted enormous costs and forced producers to switch to other, disease-resistant cultivars. New strains of Panama disease currently threaten the production of today's most popular cultivar, Cavendish.

Currently, fungicides and other chemical and biological control agents have proven fairly unsuccessful, or only successful in vitro or in greenhouses, in the face of Panama disease of bananas. The most commonly used practices include mostly sanitation and quarantine practices to prevent the spread of Panama disease out of infected fields. However, the most effective tool against Panama disease is the development of banana trees resistant to "Fusarium oxysporum f. sp. Cubense". Unfortunately, the clonal reproduction of banana has led to a consequential lack of other varieties. Efforts are being made to produce resistant varieties, but with bananas being triploids which do not produce seeds, this is not an easy task. Creating clones from tissue cultures, rather than suckers, has proven somewhat successful in breeding resistant varieties, however these tend to have decreased success in stress-tolerance, yield, or other beneficial traits necessary for commercial varieties. Nevertheless, these efforts are leading to the best control measure for Panama disease of banana.

Recently, an R gene (RGA2) was transformed into Cavendish bananas which confers disease resistance to Fusarium wilt tropical race 4. This is the first case of successful resistance in the field and is a promising step towards preventing the loss of the Cavendish cultivars that are a huge portion of banana export production and subsistence of many communities.

Boric acid (16.5%boron), borax (11.3% boron) or SoluBor (20.5% boron) can be applied to soils to correct boron deficiency. Typical applications of actual boron are about 1.1 kg/hectare or 1.0 lb/acre but optimum levels of boron vary with plant type. Borax, Boric Acid or Solubor can be dissolved in water and sprayed or applied to soil as a dust. Excess boron is toxic to plants so care must be taken to ensure correct application rate and even coverage. Leaves of many plants are damaged by boron; therefore, when in doubt, only apply to soil. Application of boron may not correct boron deficiency in alkaline soils because even with the addition of boron, it may remain unavailable for plant absorption. Continued application of boron may be necessary in soils that are susceptible to leaching such as sandy soils. Flushing soils containing toxic levels of boron with water can remove the boron through leaching.

A body buried in a sufficiently dry environment may be well preserved for decades. This was observed in the case for murdered civil rights activist Medgar Evers, who was found to be almost perfectly preserved over 30 years after his death, permitting an accurate autopsy when the case of his murder was re-opened in the 1990s.

Bodies submerged in a peat bog may become naturally "embalmed", arresting decomposition and resulting in a preserved specimen known as a bog body. The time for an embalmed body to be reduced to a skeleton varies greatly. Even when a body is decomposed, embalming treatment can still be achieved (the arterial system decays more slowly) but would not restore a natural appearance without extensive reconstruction and cosmetic work, and is largely used to control the foul odors due to decomposition.

An animal can be preserved almost perfectly, for millions of years in a resin such as amber.

There are some examples where bodies have been inexplicably preserved (with no human intervention) for decades or centuries and appear almost the same as when they died. In some religious groups, this is known as incorruptibility. It is not known whether or for how long a body can stay free of decay without artificial preservation.

Physiological plant disorders are caused by non-pathological conditions such as poor light, adverse weather, water-logging, phytotoxic compounds or a lack of nutrients, and affect the functioning of the plant system. Physiological disorders are distinguished from plant diseases caused by pathogens, such as a virus or fungus. While the symptoms of physiological disorders may appear disease-like, they can usually be prevented by altering environmental conditions. However, once a plant shows symptoms of a physiological disorder it is likely that that season’s growth or yield will be reduced.